First, the fingerprint lock installation steps
Step 1: Check whether the target door meets the conditions for installing the fingerprint lock.
Check the type of the target door first, and then check whether the effective installation width of the lock installation position reaches the lock body width of the fingerprint lock, and whether the final effect of the installation scheme can be accepted by customers. If these conditions are all right, we can continue with the following steps.
Step 2: Measure several main parameters of the old lock on the door.
This paper mainly measures the dimensions of the locking tongue limit piece (side decorative plate) of the old lock of the original door, including the length, width, the position of fixing screws (the distance between the center point of the screw hole and the horizontal and vertical sides) and the number of fixing screws (up and down 1 pair or up and down 1 pair), and then measures the thickness of the door to determine the direction of the door (divided into left inside, left outside and right inside)
Through the above measurement and observation, remember the parameters and determine whether it is necessary to order the side decorative panel. If the side decorative panel of the original security door is not the standard 30*240 or 24*240, it is generally required to order, and the cost is around 50 yuan.
Step 3: Unlock the original lock.
After determining the material and specifications of the original door and the relevant parameters of the original lock, and preparing to install the accessories, first remove the original lock and put it in a box for the customer to keep. If the fingerprint lock needs to be removed for maintenance, the original lock can be installed for temporary replacement.
Step 4: Install the new lock body and lock core.
After removing the old lock body, install the lock body of the fingerprint lock (the lock body needs to be installed with the side decorative plate first), hang up the heaven and earth poles, and then fix them with screws. Next, insert Fangpu's high-safety lock core into the lock core hole of the lock body, and insert and tighten the lock core from the side with special screws. After the lock is fixed, insert the key into the lock cylinder and turn the lock cylinder to test whether the lock body can be opened and whether the lock is normal.
Step 5: Install the front and rear panels.
Install the handles of the front and rear panels first, pay attention to the direction when installing, and don't forget to use the spring pad when installing the screws to prevent the handle screws from loosening after long-term use. Then screw on the upper and lower screw sleeves of the back cover, and insert the square bar spring into the square hole of the handle (this is very important, the spring is an important device to resist the square bar and prevent it from withdrawing from the rotating hole of the lock body. Remember to install the spring, otherwise, the withdrawal of the square bar from the lock will lead to the failure of electronic unlocking, and only emergency mechanical unlocking can be done. Then install the handle of the rear panel. According to the thickness of the car door, cut off the excess length of the connecting rod piece of the anti-lock button, insert the anti-lock button and lock it with screws. Install rubber washers on the front and rear panels. First install the front panel on the door. When installing, connect the lock body line with the lock body control line plug on the front panel. Then insert the battery cable into the car door through the upper fixing screw hole and extend it out. Insert two square bars into the front and rear bar holes of the lock body. When inserting, select a square bar with appropriate length according to the thickness of the door. Note that the square bar should not be too long, and the square bar hole inserted into the front and rear panels should be between 1CM and 3CM. If the square bar is too long, the handle will not rotate smoothly after the front and rear panel fixing screws are tightened. At this time, it is necessary to adjust the square and change it to a shorter one.
After the front panel is installed, keep it still and install the rear panel immediately. When installing the rear panel, please pay attention to first connect the battery box cable with the battery cable plug of the front panel. And insert the extra wires into the door body, and be careful that the wires do not go to the movable space of the mast, so as not to damage the power cord because of the frequent movement of the mast. When installing the rear panel, pay attention to that the connecting rod of the anti-lock button should be inserted into the control hole of the anti-lock button in the lock body, and the square rod should also be inserted into the square rod hole of the handle. Make sure that the square bar spring is installed.
Step 6: Check whether the handle and locking bolt work normally, and check whether the locking bolt hole of the door frame is appropriate.
After installation, turn the inner and outer handles of the door, check whether the locking bolt of the lock body works normally, whether the handle returns smoothly, and test whether the anti-lock button works normally. If it is abnormal, loosen the screw to adjust the position and height of the lock, and then tighten the screw after it is normal.
Check whether the door frame hole is normal, stand on the inside of the door, close the door, and lift the handle to see if the lock tongue can be inserted into the lock tongue hole on the door frame smoothly. If it doesn't fit, correct it with tools.
Step 7: Initialize the fingerprint lock and enter the administrator fingerprint.
The new fingerprint lock generally has no fingerprint, password or card input. However, before using it, it is best to enter the management mode and run the initialization operation to ensure that the lock settings are restored to the factory default values and the original data is cleared. After the initialization is completed, enter the user's administrator fingerprint and other information.
Step 8: Overall debugging
After the entry is completed, do a comparison and unlocking test to test whether the lock works normally.
Second, the purchase of fingerprint locks
1, stability
Refers to the indicator of the tightest tattoo lock. Generally, it will take more than one year of actual use before it will gradually stabilize and finalize the design. Consumers had better choose the main manufacturer of fingerprint lock when purchasing. Such companies generally have good production experience. Development experience is the best stabilizing factor.
2. Universality
It should be suitable for the use of most domestic security doors (in line with the national standard for security doors in 2008), with a small amount of modification. A good fingerprint lock installation time should not exceed 30 minutes. Otherwise, it is generally difficult for users to complete installation and protection by themselves. The universality is preset, and it can also be used to reduce the seller's warehouse. Direct users, choose a lock with good versatility, which is easy to solve after sale, and the mechanical lock or initial lock is easy to put back.
3. Intelligence
The operation of adding and deleting should be very simple, and users don't need to remember too many passwords and codes. The high performance fingerprint lock is also equipped with a video file exposure system, which is convenient for users to operate.
4. Three misunderstandings must be paid attention to when purchasing fingerprint locks:
Myth 1: The stronger the fingerprint door lock function, the better.
Many domestic manufacturers of fingerprint door lock systems are spreading how powerful their products are. In fact, the influence of the unilateral opening function on the fingerprint door lock control is the most critical for the firm control of the door lock and the simple practical operation of the function. We propose to shield powerful extended functions to meet the needs of customers, and do not recommend some functions that customers do not need to use, so as to reduce the cost of training and protection, and customers are satisfied with their use.
Myth 2: The more fingerprint door lock terminal functions, the better?
Electronic products that are stable, not easy to use and not bad are all simple in function, but can meet the demand; There are so many fancy functions that you don't need them at all. They are just chewing heads that manufacturers use to promote all the time. Functions that you will never use are meaningless. Full use is the basis of choice. No matter how complex the system integration is, it is a simple combination of single systems.
Myth 3: The more expensive the better or the cheaper the better?
The product with good cost performance is the best product. The product may be expensive because of the high advertising cost or the high product cost. It is not necessarily a high-priced product. It may also be that manufacturers unilaterally pursue low cost, try to take care of circuit investment, or choose inferior second-hand chips. Therefore, engineers must keep their eyes open and make a reasonable evaluation of the cost performance of products. Cost-effective products are the best choice. Suohuang fingerprint lock and password lock have absolutely independent intellectual property rights, obtained ten national patents, turned anti-theft into anti-theft, and completely rejected thieves. It has reached the highest level in the world in terms of anti-theft and ease of use, and its unique and special "five fears" (not afraid of violent disassembly, not afraid of technical opening, not afraid of circuit breaking, not afraid of losing keys, not afraid of power failure) have truly achieved "outsiders can't open it, the owner can't stop it" and "suitable for all ages". Fingerprint locks are widely used in security doors, anti-theft cabinets, smart homes and other fields. Many people pay too much attention to the appearance and steel plate of the door when choosing the security door, but not to the lock, the heart of the security door. A merchant takes advantage of consumers' lack of understanding of security doors to describe brand locks without anti-theft function as "advanced locks" that are anti-drilling and anti-prying, and even says that there are many locks on their own security door locks, which no one can open. This is not good. In fact, these merchants confuse the concepts of lock point and lock core. The lock point is the joint point between the door body and the wall, which can only prevent prying, and the lock core is the center of the anti-theft lock. All anti-theft locks have only one lock cylinder. No matter how strong the door body is and how many lock points there are, it is controlled by the lock core. As long as the lock core is opened, all the lock points are opened and placed on the thick steel plate.
Fingerprint lock brand list
ADEL Adel (national high-tech enterprise, leading brand of fingerprint anti-theft lock industry in China, an enterprise dedicated to producing high-tech locks, Shenzhen Adel Electronics Co., Ltd.)
Digil KEYLOCK (founded in 1990, one of the largest fingerprint lock manufacturers in China, engaged in fingerprint lock products, Digil Enterprise Co., Ltd.)
Dassman (a high-tech wholly foreign-owned enterprise specializing in fingerprint biotechnology research and fingerprint lock/safe deposit box, Zhejiang Dassman Electromechanical Co., Ltd.)
Yajie Archie (China well-known trademark, Guangdong famous brand product, Guangdong famous trademark, Guangdong Top 100 private enterprises, industry famous brands, Guangdong Yajie Hardware Co., Ltd.)
Golden Finger Code KSMAK (Hangzhou Golden Finger Code Industry Co., Ltd., the only enterprise in China that integrates fingerprint algorithm research/embedded fingerprint identification module development).
Hongda Hongda (the maker and drafter of fingerprint lock quality technical standards/industry standards, one of the largest fingerprint product production bases in China, Hongda Hi-Tech Group Co., Ltd.)
Third Ring Road (China well-known trademark, China Time-honored Brand, China Lock King, China Excellent Lock-making Enterprise, China Industry Pioneer Enterprise, the birthplace of China Modern Lock Manufacturing Industry).
Proback Proback (the only supplier of fingerprint locks for Bird's Nest in Beijing Olympic Games, the only official partner of the 24th World Winter Games in China security industry, Shenzhen Proback Technology Co., Ltd.)
Huafeng (a well-known trademark in China, Zhongshan Huafeng Lock Industry Co., Ltd., a famous brand product in Guangdong Province, a large enterprise specializing in the production and sales of R&D/ locks and hardware products)
Zksoftware (the world's largest provider/manufacturer /OEM manufacturer of fingerprint identification core technology for civilian products, a famous attendance machine brand, Kong Zhong Technology Co., Ltd.)
The installation steps and purchasing indexes of fingerprint lock are introduced above. Whether a professional installer helps you install the fingerprint lock or you install it yourself, the above detailed installation steps are still very practical.