Under today's living conditions, water dispensers have gradually entered the homes of ordinary people. According to statistics from relevant departments, the popularity rate of water dispensers has reached more than 90%. When people buy water dispensers, environmental protection and healthy water are one of the key factors they consider. A good water dispenser is not only hygienic in itself, but also has the function of automatic filtration. Let us learn about Qinyuan water dispenser today.
Qinyuan water dispenser after-sales maintenance service hotline: 400-888-5263
Qinyuan water dispenser official website: /
How about Qinyuan water dispenser: Water quality is guaranteed
Qinyuan water dispenser adopts professional membrane separation technology. Its products have the characteristics of high strength, high hydrophilicity and anti-pollution water treatment membranes. Through leading core technology, complete product specifications, first-class design capabilities and complete technical support, we ensure good water quality from the source. Let you drink with more confidence.
How about Qinyuan water dispenser: fast heating effect
Qinyuan water dispenser adopts a new type of rapid heating of accumulated water, which makes the water dispenser quick and easy to drink. It is very convenient to open and drink immediately; innovative Design a scale removal device to physically remove scale and improve the health of drinking water; high-tech buttons control the water output to save money and not waste. The biggest selling point of Qinyuan water dispenser in the market is that the heating effect of Qinyuan water dispenser is very fast. The ready-to-drink design puts Qinyuan water dispensers ahead of all other water dispenser brands, and consumers buy water dispensers based on the heating effect of the water dispenser. Naturally, Qinyuan water dispensers have become the target of public rush.
How about Qinyuan water dispenser: Brand guaranteed
As one of the leading enterprises in water treatment technology in China, Qinyuan Group has obtained hundreds of domestic and foreign patents and won the " National awards such as "Second Prize of National Science and Technology Progress Award" (first completed unit), "China Standard Innovation Contribution Award", "China Patent Excellence Award", etc. It has successively undertaken projects such as the "National High-Tech Research and Development Plan (863 Plan)", "National Torch Plan Key Projects", "National Key New Products", "National Key Industry Revitalization and Technological Transformation Projects".
Although Qinyuan water dispenser has so many advantages, stains such as scale will always appear after being used for a long time, which requires us to clean it frequently. So under what circumstances should the water dispenser be cleaned?
The following phenomena occur during use of the water dispenser
(1)? The hot water outlet of the water dispenser is not flowing smoothly. This is This indicates serious scaling inside the water dispenser.
(2) When the water dispenser is heating, it makes a loud popping noise, which indicates serious scaling inside the water dispenser.
(3) There is a lot of white scale on the hot water outlet of the water dispenser, which indicates serious scaling inside the water dispenser.
(4)? Green algae (pollutants) appear in the filter barrel of the water dispenser.
The occurrence of these phenomena indicates that the water dispenser is dirty, and you need to start cleaning the water dispenser.
The Qinyuan water dispenser does not produce hot water
The reason is that the thermal protector is broken. During dry heating, the temperature increases rapidly and the temperature in the tank is too high. At this time, the thermal protector cuts off the power supply. , stop heating.
The solution is to replace a protector. If the protector and the electric heating tube are integrated, the heating tube needs to be replaced. Check to see if the thermal protector is manually resettable. Just reset the protector manually before use.
The replacement protector must be consistent with the original model, or the rated current and disconnection temperature must be consistent.
The reasons and solutions for the Qinyuan water dispenser not heating
1. The indicator light of the water dispenser does not light up and does not heat up
Possible reasons: 1. Power supply Not connected; 2. The fuse is burned out; 3. The circuit board is broken?
Recommended solutions: 1. Check whether the heating switch is in the "on" position. Check whether the power supply and socket have power; 2. Replace the fuse; 3. Replace the circuit board.
2. The indicator light of the water dispenser is on but it does not heat.
Possible reasons: 1. The heating tube is burned out; 2. The thermostat is broken.
Recommended solutions: 1. Replace the heating tube; 2. Replace the thermostat.
The specific situation of the water dispenser not heating
The first situation: the water dispenser is not powered on, does not heat or cool.
1. Check whether there is power at the power socket. If not, turn it on immediately.
2. Check whether the contact between the power plug and the socket is reliable. If there is any looseness, insert it firmly.
3. Check whether the connection between the internal and external power supplies of the machine is disconnected, and whether it is detached from the plug-in? If so, connect it.
The second situation: the water dispenser indicator light is on, but it does not heat.
1. First, check the fuse. The fuse should be at the rear of the water dispenser. It is an insulating plastic head and a screwable protruding part. Gently unscrew it in the counterclockwise direction. Some water dispensers can only be found by opening the back cover. If there are two symmetrical ones on the left and right sides, they are not the safety pipe holders, but the drain pipes during cleaning. The fuse is a separate one and has different colors. Buy two or three of this model for backup.
2. Use a multimeter to measure the resistance of the heating tube. If it is very low or zero, the heating tube should be broken.
3. Connector, that is, the plug part may have poor contact, or the neutral line of the plug may be short-circuited, so that there is power when you test the socket. At this time, both wires should have power.
4. The power cord of the water dispenser may be broken internally due to long-term use. As long as one of the cords is broken, the water dispenser will have no power input.
5. The internal power input part of the water dispenser has been corroded and oxidized and disconnected due to being in a wet state for a long time.
Third situation: The temperature control switch has tripped, or the thermostat is damaged.
Open the lid behind the water dispenser and you should be able to see the tank used by the water dispenser to heat water. Usually there are two round things facing you with two wires plugged into them, which are the thermostats. Usually the one at the bottom is a repairable temperature control. It is characterized by a small button. You can Use a chopstick to push the button to see if the water dispenser is functioning properly. If it remains the same, the temperature control must be broken. Only replaced.
The fourth situation: the Qinyuan brand water dispenser does not heat, the power light is on, it cannot be heated, no hot water is produced, and the heating indicator light does not light up.
The main reason is that the insurance inside the water dispenser tripped. Take apart the back panel of the water dispenser and there will be a black button to reset it.
Qinyuan water dispenser filter element replacement
Qinyuan water dispenser filter element replacement time
The filter water dispenser mainly relies on the filter element. Generally, one inner core can Used for 6-9 months. The specific replacement time is mainly determined based on the raw water quality, water output, etc. The replacement time of the water purifier filter element is determined. In places where the water quality is poor, the PP cotton will turn yellow after being used for a period of time. The non-woven fabric and PP cotton in the filter element of the filtered water dispenser will reduce the water output after being used for a period of time. This is because it is blocked by organic matter and other pollutants in the water. Most users will choose to clean it. In fact, Qinyuan Drinking Water The filter element of the machine is equivalent to a one-time use. After using it for a period of time, it is recommended to replace it directly to solve the fundamental problem.
Qinyuan water dispenser filter element replacement steps
Qinyuan water dispenser filter element replacement requires the original filter element, equipped with small tools, mops and other tools and raw materials. First, turn off the power for safety. Then use a small tool to remove the filter cartridge. Note that there must be water in the water dispenser, so prepare a mop.
After removing it, pay attention to a small gasket, which is usually black. Take out the old filter element and put in the new one. There is also a transparent gasket on the filter element. Don't remove it. If not, the effect will be much reduced. Then place the one with the gasket on the water outlet. Before installing the filter element, rinse the new filter element with clean water and use a small tool to install the filter element barrel in place. Finally, open the water inlet, turn on the power, and let the water run for one to two minutes to check if there is any water leakage. If not, the water dispenser filter element is installed.
The editor reminds that the water storage tank (heating tank) and inner tank of Qinyuan water dispenser need to be cleaned every three months. Clean them with a clean rag without oil stains, and then rinse them with clean water 3 times. , and then check to see if there are any water droplets inside the Qinyuan water dispenser (to avoid short circuiting the circuit due to water droplets).
Qinyuan water dispenser cleaning method
1. When the water bucket is replaced, that is, when the water level inside the bucket is only about 1/6 (about 3 kg), remove the bucket and add this agent One pack to fully dissolve the solvent;
2. Cut off the power first, and then drain the remaining water from the water dispenser drain outlet (the drain outlet is on the back or bottom of the water dispenser);
3. Place the bucket containing the water dispenser descaling solution on the water dispenser, open the faucet, and then close the faucet when water flows out. Fill the machine with solution. After soaking for 5-10 minutes, open the faucet and drain outlet to drain out the remaining water;
4. Place the bucket filled with clean water on the water dispenser, open the faucet, and there is water. When it flows out, close the faucet, wait 30 seconds, then open the faucet and drain outlet to drain out the remaining water. After that, you can power on and use it normally.
Warm reminder: Why is the water always sour after cleaning? That is because you did not drain the water after cleaning. Generally, there are two water blockages behind the water dispenser. These two water The clogged water level is always lower than the water level of the two front faucets. Therefore, the water for rinsing the water dispenser cannot be drained cleanly through the front faucet only, so the water will always smell sour! So, remember to clean it next time Finally, the four front and rear drainage holes must be drained at the same time, so that the acidic water containing disinfectant and descaling agent can be drained completely!
Tubatu provides you with free "decoration quotations for each home, 1-4 "Local decoration companies, 3 sets of decoration design plans", and strategies to avoid decoration pitfalls! Click this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiareamp;wb, you can get it for free~