/Article/system/netsoft/200506/Article _ 2394 . html
note:
1, it is simple to modify the BIOS boot screen with the magic screen, but it is dangerous to modify the BIOS immediately.
Be careful, and when using the magic screen, back up the BIOS files of your motherboard, especially some motherboards with miscellaneous brands.
2. Because the phantom screen is a refresh program under Winflash WINDOWS, the system must be shut down when using the phantom screen.
Antivirus detection program, CPU temperature control program and some background programs.
3. When the magic screen calls Winflash backup or refresh program, never restart or shut down halfway.
4. When the magic screen calls Winflash backup or refresh program, pay attention to whether Winflash correctly detects the motherboard BIOS chip.
If it is not detected, please do not continue to run the magic screen.
5. If the LOGO is not displayed when the magic screen restarts after the operation is completed. Please press the "DEL" key to enter the CMOS settings, find and
Set "Full Screen Logo" to enable, save and restart.
6. If the phantom screen detects that the BIOS file capacity is insufficient or the image file is too large, do not continue to run the phantom screen.
Beautiful boot screen is the patent of brand-name machine, and ordinary users are very yearning for it. However, the complicated production operation flow (DOS operation chess style).
Let ordinary users stop, so only a few players have beautiful startup pictures, and ordinary users are still bored all day.
Self-check screen, ordinary users can't enjoy a beautiful boot screen?
The emergence of EPoX magic screen has changed the bitter brain of Pan Ying motherboard users. The magic screen doesn't need to know the command parameters of CBROM.
You don't need to enter any DOS commands, and you don't need to know how to refresh the BIOS ... Modifying the boot screen is as easy to learn as installing the program, which supports users.
Personalized boot screen settings to meet the needs of users in personality (boot screen can be added at will).
However, because the phantom screen is a special software developed by Pan Ying Science and Technology (EPOX) in Taiwan Province Province, if the motherboard brand is not Pan Ying, it will not be possible.
Run this program; Therefore, it is necessary to simply modify the file; Not much to say, the specific operation steps look down:
The file needed for this article: Magic Screen BIOS file can be downloaded from this website.
First, modify the running program.
Most documents have certain limitations. The phantom screen is no exception, which is closely related to the type and version of the motherboard BIOS; that
At present, only Award BIOS is supported (AMI BIOS users cannot use this program), and only AWARD6.0 BIOS is supported.
Documents; Magic screen can't be used in the earlier BIOS version of AWARD4.5 1. If you don't know the BIOS type and version of the motherboard
, you can use the BIOS agent to check. Run the BIOS agent and click "Get BIOS Information" to get the BIOS information of the motherboard.
Make sure that the motherboard has the conditions to run the phantom screen (BIOS is AWARD6.0), and then download and install the phantom screen; It's a
A compressed file, after decompression, run SETUP installation; Its default directory is "c: \ program files \ EPOX \ magic screen", and we
You can run the magic screen file in its directory directly, or you can run Start-Program -EPOX- Magic Screen. ;
If the motherboard brand is not Pan Ying, there will be a motherboard type error prompt when running the magic screen:
Don't worry, click "OK" to exit, click on my computer-select "Drive C"; You can find an "Epoxmbid.txt" and double-click.
You can open this file; The content in the file is your motherboard ID. We only need to change the last three digits of the ID to the Pan Ying logo "PAB" (Note 1
PAB must be capitalized), and then save and exit, just change the file attribute to "read only" (it must be set to read only).
In fact, when the magic screen is running, first detect the ID of the motherboard; And save it in "Epoxmbid.txt", and then read its id. If it is selected,
It is measured as the main board of Pan Ying, that is, running; Otherwise, an error will be prompted. After we modified its file and set its properties to read-only, when we run Magic Screen,
, it will not be able to modify the contents of "Epoxmbid.txt", so it thinks that the motherboard id is correct and can be run.
Second, the picture file
Then we need to prepare a full-screen boot screen. Magic screen can support BMP files with 640 * 480 16 colors or 256 colors. We can use the drawing program that comes with WINDOWS or other graphic editing software to make our own personalized pictures, and set the picture format as BMP when saving.
Files are enough; Finally, save the BMP file in the "Sample" folder under the magic screen installation directory. The default directory is: c: \ program files \ EPOX \ magic screen \ sample. After installing Magic Screen, the sample directory already contains several startup LOGO of the EPOX motherboard.
Third, the operation steps
Run the magic screen to enter the main interface (as shown in the figure below), where there are software introductions and tips for picture format requirements. Click the "Clean Steps" button to continue.
Magic screen will automatically call Winflash (version 1.6) to back up the current motherboard BIOS (backup in the installation directory, file name Backup.bin).
Figure X
After the backup is completed, the magic screen will list all the pictures that meet the requirements in the sample directory, and according to the remaining space of the BIOS file and
The size of the compressed image file automatically determines whether the image can be added to the BIOS. Represented by "√" and "X" (Figure 10)
Because the size of any BMP file with 640 * 480 256 colors is 30 1KB, which has exceeded the capacity of general BIOS chips. Although this file is common
After LHA is compressed, it is added to the BIOS file; However, the more complex the picture, the lower its compression ratio. Therefore, the LOGO picture can't be made
Too complicated, just need simple lines; This is why many BMP files are marked with "X".
Its main interface can only display six pictures at a time, so if there are more than six pictures, you can press the button to choose.
After selecting a picture in Magic Screen, a big preview will appear. If you confirm this picture, you can continue to press "Clean Step".
Press the button to continue (Figure 12). After displaying the change of the remaining BIOS space, the user will be prompted not to shut down and restart during the next operation.
computer
(Figure 13), at this time, as long as you continue to press the "Net Step" button, the magic screen will continue to call Winflash program to refresh the BIOS.
Figure 12 Figure 13
At the beginning of the refresh, be careful not to stop or restart or shut down the computer! ! !
After the BIOS is refreshed, click the "restart the computer" selection box (Figure 14) to restart the computer; We joined the whole.
You can display the screen boot LOGO picture, and the process of modifying the full-screen boot LOGO is completed.
Figure 14 Figure 15
If you want to delete the full-screen boot LOGO, especially some brand machines, you should delete its logo; You can also use the "Restore Default Screen" button in the magic screen, and the magic screen will automatically back up the BIOS files and then delete them.
LOGO picture, and finally brush the BIOS file again to clear the LOGO (Figure 15).
/Article/system/netsoft/200506/Article _ 2394 . html
/Article/system/netsoft/200506/Article _ 2394 . html