1, see the work of the certificate. The real certificate is well made, mainly depending on whether the diamond shading in the certificate is clear and whether the four corners are clear, which is debatable. Both the home page and the sub-page have the word "brand". See if the horizontal line under the word "white" in the word "brand" is prominent or not. Is the second point of the word "room" on the secondary page longer? It is really longer and shorter.
2. Look at this seal. Real document seals are generally printed with red fluorescent anti-counterfeiting ink, and some are stamped by hand. In the inspection, one should pay attention to whether the color of the seal is correct, and the other is whether it is clear from various angles. Third, it depends on whether the contents of the seal and the date of issue are clear.
3. Look at the font. Except for the printed fonts, all other fonts on the certificate are printed by a pin printer, and there are obvious pinholes in the fonts. If the seal on the driving license is XX Traffic Police Detachment Vehicle Management Office or XX Traffic Police Detachment, the fonts used are all patented anti-counterfeiting fonts. This font can only be typed with the printer customized by the Ministry of Public Security and the font library in the vehicle management office software. Both laser printers and inkjet printers print false certificates. The most obvious features of this font are the numbers 5 and 0. This font was adopted nationwide after 200 1, 10.
First of all, let's say that the horizontal orbit above "5" is composed of two parts. The first part is horizontal, then bends down and then goes up. The degree of upward is basically consistent with the level. One kind of false certificate is to bend directly without crossing, and then bend up. The other is to have a cross, and then bend directly upwards, without bending downwards, and the part bent upwards exceeds the cross. Then let's talk about "0". There is a horizontal line in the middle of 0. This horizontal line is inclined at first glance, but it is not. In fact, the cross in the middle is made up of two small crosses, and then there is a cross between the two small crosses, which is made up of two vertical needles. ?
4. Look at the vehicle model. As mentioned above, the second and third place of brand model in the driving license is the total mass of the vehicle, and three places can be used if it exceeds100t. This two-digit number can be compared with the total quality of the driving license endorsement to see if it matches. The third place in the total quality column is generally rounded off, but some third places are "5" and are not entered, but those with "6" must be entered. At the same time, you can see what car it is by looking at the first number, and then compare it with the vehicle to see if the vehicle has been modified.
5. Look at the secondary certificate. The supplementary certificate is also an integral part of the driving license. First of all, it depends on whether the supplementary certificate is consistent with the original certificate, mainly on whether the workmanship of the certificate is consistent with the font endorsed on the certificate. When the fonts of the original driving license and the auxiliary driving license are different, the parties will cheat the traffic police on the grounds that the auxiliary driving license is lost and only one auxiliary driving license is added. However, according to Article 30 of the Motor Vehicle Registration Regulations, the driving license that has not been lost, lost or damaged will be taken back after the replacement and renewal of the driving license, so there will be no difference between the original license and the supplementary license.
6. Look at photos of vehicles. Because the overload of national governance is now calculated by axle load, some car owners add axles privately in order to pull more goods without paying more road maintenance fees, so they only change the original photos on the vehicle driving license after adding axles. Identifying this fake driving license mainly depends on whether the approved quality of the vehicle is consistent with the photo. For example, the driving license of 10 ton is a rear three-axle car. In this case, it is necessary to query the technical parameters of vehicles through the public security traffic information network in time for comparison.