How to solve the quality problem of bent tempered glass during the operation of tempering furnace?

1. When the radian parameters of the bent tempered grille are set incorrectly or the glass moves, it will lead to the situation that the arcs of the bent tempered glass do not match and the diagonal corners of the bent tempered glass are not on the same plane; At this time, it is necessary to adjust the radian of the bending steel grating and correct the position of the glass positioning baffle in the bending grid;

2. When the arc edge of the bent tempered glass cracks; The tempering wind pressure of arc grille should be reduced, the injection delay time should be shortened appropriately, and the arc starting speed of arc grille should be reduced.

3. In the production process, when the radian of the processed bent glass changes, the radian parameters should be readjusted, the heating time should be appropriately extended or the temperature of the tempering furnace should be increased, and whether the furnace wire and thermocouple work normally should be checked.

Randy tempering furnace answers for you.