1, hinge: it is the most important hardware accessory of the cabinet. According to statistics, the cupboard door has to be opened and closed 65438+ ten thousand times in 10 year! Therefore, the quality of hinges is very important for the normal opening and closing of cabinet doors. There are two indicators to measure the quality of hinges. One is the structural strength, and the standard is whether it can be switched100000 times under a door load of 75 pounds. The other is the surface corrosion resistance, the index is whether it can resist corrosion 48 hours after salt water spraying. In addition, hinges can be divided into three types according to their installation methods: ordinary type, ordinary type and luxurious type, which are quite different in the adjustment of installation methods and installation positions. Some quick-assembly hinges can adjust the position of the door panel in three directions: front and back, up and down, left and right, without removing screws, which improves the installation efficiency and standardizes the operation quality of installation.
2. Slide rail: The drawer slide rail is second only to the hinge in the cabinet, and is mainly used for drawers and drawing. There are three kinds of sliding rails used in cabinets: ordinary bottom support, metal side plate and luxury all-inclusive type, and the differences between them in appearance, performance and price are extremely obvious. Ordinary bottom-supported slide rails are simple in structure and low in price. The side plates of drawers need to be made of wooden boards, and the width of drawers should not exceed 600mm when making them. The structure of the metal side slide rail is similar to the former, because it has steel plates on both sides of the drawer. The appearance is more exquisite and more durable and affordable than the former. Luxurious all-inclusive drawer slide rail with patented pulley. When sliding, the noise is extremely low, and the drawer is heavily loaded. The heavier it is, the more slippery it is. The inner corner is arc, which is convenient for sanitation and cleaning. Full-pull design makes the items stored in the drawer clear at a glance, which is convenient for direct access.
3. Shock absorption: The main purpose of shock absorption product design is to reduce the impact between the door panel and the cabinet, prolong the service life of the door panel, reduce the noise during kitchen operation, and create a quiet and comfortable indoor environment. There are three ways to achieve shock absorption effect: one is oil pressure shock absorption. The representative product of this structure is the EKA damping door closer imported from Italy, which will leak oil after a period of use and lose its damping effect after a period of time. Most domestic cabinet suppliers that attach importance to quality have stopped using it. The second is silicone oil matrix. Its representative product is Blum's luxury damping drawer, which has stable damping and can intelligently achieve damping effect according to the intensity of operation, but there is no closed-door appearance of this principle in the market at present. Third, pneumatic shock absorption, the representative product of this method is Hettich's shock absorption drawer, which will lose the shock absorption effect if the force is slightly large, and will cause damage to the cylinder and completely lose the shock absorption effect if it is improperly used. Fourth, mechanical spring damping, door closers and drawers are damped in this way, with stable effect, no aging and reliable quality. Its representative product is Hettich's damping door closer.
4. Bracket: According to the upturned form, the cabinet bracket can be divided into upturned type, translational upturned type, vertical translational upturned type and folding upturned type. According to the weight of the supporting door panel, it can be divided into ordinary type and heavy supporting type. At present, the commonly used supports in the market are pneumatic support and damping pneumatic support. The supporting force of a single pneumatic support is 80 Newton, and the width or height of the cabinet door panel is 900mm >:500s, which will require heavy support. With the support of SUSPA in Germany and HUWLL in Italy, their products have been tested in the market for a long time and are trustworthy.
5, hanging code: the accessories used in the cabinet installation hanging cabinet have undergone three generations of improvement because they directly affect the safety performance of the product. The first generation of exposed ABS engineering plastic hanger code was fixed by self-tapping screws and side plates, which affected the appearance of the hanger and had poor load-bearing performance. Most cabinet suppliers have been eliminated; The main features of the second generation hidden steel crane yard are that it is installed and hidden between the back plate and the wall of the hanging cabinet, which does not affect the appearance of the hanging cabinet, and improves the load-bearing performance, with a single load of 65KG；; On the basis of the second generation products, the third generation steel concealed crane code has made technological innovations in the connection and fixation with solid side plates and the installation of pendants, and strengthened the stressed parts, with a single bearing capacity of 70KG；; The main brands are German Hettich, CAMAR, Spanish INDEX and so on.
6. Adjusting feet: There are two kinds of adjusting feet: PVC and ABS. PVC has low cost, and is mostly made of recycled plastics, with poor load-bearing performance. The adjusting feet made of ABS engineering plastics are durable and have good load-bearing performance, which can support the weight of the whole cabinet more effectively.
7. Kick line: Kick line can be divided into three types: wooden kick line, PVC kick line and aluminum kick line. In order to reduce the cost, some manufacturers make wooden skirting boards with leftover bits and pieces when making cabinets. However, because the skirting board is very close to the ground, wooden materials are easy to absorb water and get wet. After a period of use, the wooden skirting board will become "fat" and moldy. PVC skirting and aluminum skirting are recognized by experts, which are not only waterproof, moisture-proof, mildew-proof, rust-free, but also beautiful and durable. In particular, aluminum skirting boards are almost lifelong.