1. How to set the USB flash drive of Lenovo notebook? Open Lenovo notebook and press f 12 to enter the USB flash drive startup item.
2. The computer needs to set startup items in the bios. In fact, there is also the simplest method to directly call the startup item selection.
3. Press F 1 continuously to enter the Lenovo BIOS interface before entering the BIOS setup boot interface.
4. Then move on the keyboard, select advanced options to start, and find the startup option.
5. Set the startup project. Then Zuo Zuo uses the arrows to adjust the startup sequence according to the following tips. As shown in the figure, the USB flash drive is started by USB BHDD or USBzip.
6. After saving and exiting, press F 10 to save and exit.
7. If the modification is wrong, or if you don't know what has been modified, restore the default settings. Press ESC and select? Load Settings Defaults.
8. Save and exit. Press F 10 to save and exit.
U disk, full name USBflashdisk, English name "USB flash disk". It is a miniature large-capacity mobile storage product that uses USB interface and does not need physical drive. It can be connected with computer through USB interface to realize plug and play. The name of USB flash drive comes from a new storage device produced by Netac Technology, which is called "USB flash drive" and is connected by USB interface.
After the USB flash drive is connected to the USB interface of the computer, the data of the USB flash drive can be exchanged with the computer. However, the equipment with similar technology produced later, because Netac has registered the patent, can no longer be called "USB flash drive", but changed its name to "USB flash drive". Later, the name U disk was widely known because it was easy to remember, and it was one of the mobile storage devices.