1. Turn off the water source: Before cleaning, the water source must be turned off to avoid water flow interfering with the cleaning process.
2. Dismantle the faucet: tighten the nut at the bottom of the faucet with a wrench to separate the faucet from the faucet.
3. Cleaning the water nozzle: soak the removed water nozzle in detergent, brush off the dirt on the surface after about 10 minutes, and then rinse it with clean water.
4. Cleaning the faucet: use a brush and detergent to clean the surface and internal water pipes of the faucet, and pay attention to cleaning every detail, including the nozzle, switch handle and the bottom of the nozzle.
5. Rinse: Rinse the faucet and faucet thoroughly with clear water to ensure that there is no residual detergent.
6. Install the faucet: reinstall the cleaned faucet on the faucet and tighten the nut with a wrench.
7. Turn on the water source: After cleaning, turn on the water source and check whether the faucet and faucet work normally.