Overview of magnetic turnover level gauge

The UHZ- 1 magnetic flip-plate liquid level gauge is a new type of instrument, which uses the magnetic steel in the float to drive the double-color plate to turn over to indicate the liquid level. The magnetic float in the main body moves up and down with the rise and fall of the liquid level, and at the same time drives the double-color plate in the indicator outside the main body to turn over, turning red when there is liquid level and white when there is no liquid level. The boundary between the red and white color bands represents the liquid level height. There is an eye-catching scale on the left side of the indicator. So that the liquid level indication is clearer.

Basic differences:

Measuring range LD: 200 ~ 15000mm.

Second, product classification:

1.UHZ- 1D, UHZ-3D/B plug-in magnetic float level gauge: this level gauge is suitable for liquid level measurement and control of underground storage tanks and pools.

2.UHZ- 1W, UHZ-3W/B adiabatic magnetic float level gauge: This level gauge is formed by installing an insulating jacket outside the basic body and introducing heat medium such as steam. The normal flow of liquid in the main body can be maintained. Therefore, it is suitable for liquid level measurement and control of easily solidified liquid. For low boiling point liquids, refrigerants such as cold water can be introduced to ensure the stability of the liquid level. Make the instrument correctly indicate the measured liquid level.

3.UHZ- 1S, UHZ-3S/B antifreezing magnetic levitation level gauge: It is a patented product specially designed by our factory to solve the external icing problem of low temperature level gauge. Inside the heat insulation sleeve is a vacuum layer. So that cold and heat conduction can be effectively isolated. It ensures that the outside of the main pipe of the liquid level gauge will not freeze and frost. So as to ensure the normal use of the liquid level gauge.

4.UHZ- 1J, UHZ-3J/B strong corrosion-resistant magnetic float level meters: all parts of the level meter in contact with the medium are made of steel-plastic composite pipes. It can be applied to the liquid level measurement and control of various strongly corrosive media.

5.UHZ- 1 can display the liquid level locally, and can also be used together with XQ transmitter produced by our factory. It can be installed on the outside of UDZ- 1 level gauge body, corresponding to the upper and lower level alarm. When the magnetic float in the main body moves up and down to the alarm set point with the rise and fall of the liquid level, the magnetic steel in the float will make the reed switch contact in the transmitter close or open. Because the transmitter adopts the principle of magnetic circuit memory. Therefore, the output contact signal has self-holding function and is not afraid of power failure. After the power is restored. The working state of the transmitter contact can still reflect the real situation of the measured medium level, which plays a very important role in ensuring the safe operation of the process. The automatic control of liquid level can be realized by adopting HR-XMTA series alarm controller produced by our factory.