No.
Suitable for safety protection of any electric water heater.
After the water heater is installed with an anti-electric wall, no matter what kind of leakage accident occurs in the water heater, no matter whether the water heater has a grounding wire or not, there is no risk of electric shock in the part below the anti-electric wall, thus ensuring personal safety during the bathing process.
Chinese name Electrical isolation wall Alias ??water resistance attenuation isolation method Material resistance temperature 15℃ Pressure 1.5MPa Voltage 220V Catalog 1 Principle 2 Installation and use 3 Device function 4 Anti-electric wall technology 5 Technical indicators 6 Specifications and features 1 Principle editor "insulation wall" is an abbreviation, and its exact expression should be "water resistance attenuation isolation method".
In the general impression, water is a conductor, and contact with electricity is very dangerous.
In fact, any object has resistance, so if it is economical, it can be transformed into an appliance that meets people's needs and benefits mankind.
That's what "electrical walls" are.
"Electric isolation wall" (i.e. water resistance attenuation isolation method) uses the resistance of water itself (for example, the national standard stipulates that the resistivity of tap water at 15°C should be greater than 1300Ω.cm). The selection of the material (insulation material) of the water pipe in the water heater, and the determination of the pipe diameter and distance form an "insulation wall".
When the electric water heater is powered on, even if the water in the heating tank has electricity, it will be attenuated by the resistance of the water itself when passing through the "insulation wall" to achieve the purpose of electrical isolation, making the water heater The voltage at both ends of the water inlet and outlet reaches almost zero and a very weak current below 0.02mA/kw.
The use of "insulation wall" technology can not only block the leakage that may be generated by the electric water heater itself, but also block the safety threats to shower users caused by electrified ground wires or electrified water pipes.
Therefore, the water heater using "insulation wall" technology can fully ensure people's bathing safety.
2 Installation, use and editing 1. The anti-electricity wall can be installed separately at the water inlet or outlet of the water heater, or one can be installed separately to form a double anti-electricity wall structure to achieve a better effect of anti-electricity wall installation.
2. Wrap raw material tape 2-3 times around the water heater inlet and outlet, and put a sealing ring in the insulation wall hole.
3. After the installation is completed, conduct a water test on the water heater to check whether there is any leakage in the insulation wall. If there is water leakage, tighten it appropriately until it does not leak.
If water leaks, stop using it.
3 Device Function Editor 1. Isolate the charged current in the water due to leakage of the heating element during the heating process.
2. Isolate the damage caused to shower users due to electrified ground wires or electrified water pipes.
4 Anti-electricity wall technology Editor Anti-electricity wall technology is a water heater safety patent that integrates and applies various technologies such as water heater pipeline design technology, raw material technology, and electrical damping technology, and is invented on this basis. Technology, which mainly includes the following aspects: internal anti-electricity design. The selection and installation of heating pipes, magnesium rods, thermostats and other parts inside the water heater adopt special insulation treatment to ensure that electricity in the water will not leak; external Anti-electricity design: The outer shell, mixing valve, nozzle, and hose of the water heater have undergone special anti-electricity treatment to ensure that the parts in contact with the human body are insulated.
Anti-electricity design of the pipeline. The pipeline of the water heater uses raw materials with a special formula in the material selection. The structural design of the pipeline uses damping technology to ensure that people can bathe even if the water in the water heater is electrified. Safety 5 technical indicators editor 1. The leakage current is less than 1mA at 220V voltage (international standard 5mA), and you can take a bath even if there is a leakage.
2. Pressure-bearing 1.5MPa3. Temperature resistant to 100 degrees Celsius 4. Water resistance is greater than or equal to 1MΩ5. Standard 4-tap connector