1. Damping aluminum foil tape die-cut products, electrical tape die-cut products, foam tape seal bonding products
2. Rearview mirror base structure bonding tape mold Cut products
3. Die-cut products of sound-absorbing materials for special parts
4. Die-cut products for in-car display LCD, VCD, and DVD, and used for transfer tape for interior parts of the car Die-cut products, die-cut products of tapes used for bonding various interior parts
5. Die-cut products of protective buffer materials, die-cut products of roof structure sealing tapes and other materials
Installed products: Utilize double-sided tape, foam tape, transfer tape, double-stabilized tape that resists plasticizers, tape that can reduce fog, and can be used on auto parts after being divided and die-cut. Such as: instrument panels, lamp housings, decorations, etc., the actual installation is faster, simpler and more accurate.
Noise reduction and shock absorption: Use foam, blankets, or anti-scratch pads between metal parts and plastic parts, between plastic parts and plastic parts, between metal parts and metal parts. Die-cut products made of textiles, etc., to reduce noise and shock.
Interior and cushioning: Various neoprene, foam and silicone materials are precision die-cut and used in decorative parts, doors and ceilings.
Other applications: vehicle logo installation, high temperature resistant spray masking paper, airbag sealing, speaker covers, temporary protective bladders, etc.
A. Fixation of rubber parts
B. Protection of PCB
C. Flash memory card
D. Fixation of LCD buffer pad
E. Fixing of buttons and hard materials
F. Fixing of mirror cover
G. Fixing of flash battery/cushion pad
H. Reflective mold Fixing
I. Fixing of battery board
J. Fixing of LCD module
1. Nameplate
2.FPCB
3.LCD module fixing
4.FPCB fixing
5.FPCB fixing
6.Battery board fixing
7. Serial number label
8. Handset/microphone dust-proof pad
9. Lens buffer pad
10. FPCB fixing A.LCD seal
B. Panel frame-resistant adhesive sheet
C. Light guide plate reflective sheet
D. Backlight reflective sheet
E. Light shielding Sheet
F. Optical film sheet
G. Lamp reflector sheet
H. Flexible circuit board adhesive sheet
I. Bottom frame adhesive sheet 1. Panel sandwich
●No pollution
●Prevent loosening
●Prevent impact noise
●Prevent adhesion
2. Around LED
●Prevent light leakage
●Absorb impact
●Improve air tightness
3. Around the bottom of the PCB
●Absorb impact
●Absorb vibration
●Fill the gap
●Thermal insulation effect
4. Keyboard gasket
●Rebound
●No pollution
●Good dimensional stability
5. Battery Surrounding
●No pollution
●Absorb impact sound
●Improve air tightness
6. Foot pads
●Good friction
●No pollution
●Good dimensional stability
7. Disk drive tail pad
●Absorb vibration
●Prevent impact noise
●Improve air tightness
8. Friction gasket
●Good friction
●No pollution
●Good dimensional stability
9. Soft cover cover
●Absorb vibration
●Block motor noise
●Dust-proof
●Improve air tightness
10. Speaker surround
●Prevent noise
●Fill the gap
11. Around the LCD
●Dust-proof
●Absorb shock
●Fill the gap
●Improve light shielding A. Window/lens protection
B. Window/lens fixation
C. Nameplate
D. Serial No. label
E. Headphone/microphone O-ring fixation
F. Headphone/microphone dust-proof net
G. Window dust-proof pad
H.LCD reflective film/backlight film
I.LCD frame fixing
J.Battery compartment fixing
1. Keyboard fixing
2. Microphone dust-proof net
3. Microphone dust-proof pad
4. Wire fixing
5. Battery board buffer pad
6. Handset/microphone buffer pad
7. Handset/microphone dust-proof pad
8. PCB fixing
9. Battery board labeling mold The cutting machine is mainly used for die-cutting, creasing and cold embossing operations of trademarks, cartons, greeting cards, etc. in the paper packaging and decoration industry. It is an important equipment for post-printing packaging processing and forming.
Types of die-cutting machines: Die-cutting machines are mainly divided into three types: round pressing, round pressing, and flat pressing according to different imprinting forms.
According to the form of template placement, it can be divided into two types: vertical and horizontal. There are two types: manual (semi-automatic) and automatic according to the degree of automation. Functionally speaking, in addition to die-cutting, there is also a hot stamping function, which is called a hot stamping die-cutting machine. Some have an automatic waste removal function, which is called a waste removal die-cutting machine. The characteristics of the rotary die-cutting machine are line contact, low die-cutting pressure, and high production efficiency. It can be connected with printing equipment such as offset printing machines, flexo printing machines, and gravure printing machines for in-line die-cutting, so it has a wide range of applications. .