How to tear the automobile glass film: how to tear it?
First of all, we should have a good understanding of car movies. At first, friends can understand that the key to the car film is electrostatic adsorption, plus a little bit of other sticky substances. If it is only electrostatic adsorption, friends can just uncover it from the edge of the car film. With the addition of viscous substances, the adsorption strength increases, and it is abnormal and effortless to uncover it by hand.
1. Directly peeled off, the inferior film is easier to handle, and the adhesive strength of this film is not particularly good, so it is easy to peel off. It is quite difficult to make high-quality car film, so you need to find your own master or buy professional tools. The key of professional tools is glue remover. Because it is dedicated to the glue remover, it will be very special to use, and the blade is different from the ordinary knife to avoid cutting the car glass during glue removal.
2. After uncovering the film, the most important job is to remove the glue. At this time, you should go to the car beauty shop to buy some cleaning solution, or ask the master of the car beauty shop to help you remove it directly. It is these two processes to remove the old car film. If there is no glue remover, wash it repeatedly with cleaning solution until it is satisfactory. If you have tools, repeat the above process. If it can't be cleaned, cut it with a knife and then clean it with cleaning solution. Get rid of the old car film quickly However, if you want to quickly remove the old car film, you'd better go to the construction shop to find a master. If you choose to stick a new film, the work of removing the car film is free.
3. Removal of vinegar. Apply vinegar evenly to the adhesive with a cotton swab. Through the glass, we can immediately see the slow diffusion of vinegar between the glass and the adhesive. At this time, scrape the glue back and forth with a cotton swab. Soon, the glue will start to peel off one by one, and there are few glue components left on the glass. Once you clean it with paper, it will be as clean as new.
4. The essential balm has been removed. There is no obvious change when the essence just comes into contact with the adhesive. We insist on applying sesame oil to the self-adhesive and then scraping it off with a cotton swab. Slowly, we felt that the adhesive softened and some of it was scraped off. As we kept daubing and scraping, the reaction between them became faster and faster. After about 2 minutes, a sticker was torn off.
5. Alcohol removal. Brush alcohol on the sticker on the glass and watch the sticker soften and dissolve slowly. Gently raise your hand, and the glue will leave the glass cleanly.
How to Tear the window film of Automobile: The Function of Automobile Film
Generally speaking, window film has seven advantages:
1. Heat insulation and sun protection. The film can block a lot of heat brought by infrared rays.
2. Ultraviolet protection. The medium wave and long wave of ultraviolet rays can penetrate thick glass, and a layer of heat insulation film can block most ultraviolet rays. Avoid skin damage and reduce the aging of automobile interior.
3. Safe and explosion-proof. The base layer of the film is polyester film, which has good tear resistance and puncture resistance. With the adhesive layer of the film, the strength of sticking the glass can avoid the damage caused by accidental glass breakage to drivers and passengers.
4. Create a private empty room. After choosing the appropriate film type, you can't see the inside of the car in general, but you can see the outside of the car in the car to keep privacy and safety.
5. Reduce the consumption of air conditioners. Sticking thermal insulation film can make up for the loss of cooling capacity, instantly reduce the temperature inside the car and achieve the necessary fuel consumption.
6. add beauty. According to personal preference, the film can be personalized and beautiful.
7. Anti-glare. Unexpected conditions caused by reduced glare.
How to tear off automobile glass film: classification
There are three kinds of automobile thermal insulation films: dyed film, metal film and magnetron sputtering film. In order to facilitate understanding, we can divide the categories of car movies into six categories.
1. Dye film. Refers to the lowest automotive film, which is thin, non-insulating and easy to fade. Most of them are sold in small shops, which are very cheap. It only costs one or two hundred yuan to paste the whole car. & ampLdquo is missing teeth. Is its most striking feature. Most of these films were shot in Taiwan Province province, China.
Secondly, a layer of printing film is coated. This is a unique Korean craft. Most of them are thicker. This film has good heat insulation, but its perspective is a bit poor.
3. Ordinary metal film. Refers to the process of sputtering metal on the colorless original film layer. Most metals used are aluminum, iron, etc. Most of these films were produced by China, Indian, Japanese and American. The most common metal film on the market is this kind of metal film. The composition of the film (most of the metal on the film-based material is evaporated by heat), but this film has the strongest transparency and heat insulation, and the price is not low. Most beauty shops often use this film as the top film. Many well-known brands, I don't think it is necessarily this ordinary metal film, because they entered the market earlier, so consumers mistakenly think that this film is a high-grade film.
Fourthly, nano-ceramic membrane. It is produced by combining magnetron sputtering technology and metal nitriding technology on the basis of nano titanium nitride. Durable, not easy to corrode, and does not interfere with electromagnetic signals. The origin is not limited, and the United States, Japan and China basically have this ability. Amber optical nano-ceramic thermal insulation film is the latest ceramic film (in February, 2006, the global patent for multilayer nano-ceramic thermal insulation film was successfully applied for +0: 6,188,512).
Verb (abbreviation of verb) Precious metal film. As the name implies, this film is also sputtered on the colorless original film layer, but the difference is that the sputtered metals are basically precious metals such as chromium, titanium and platinum. In addition, the sputtering method of thin films is "magnetron sputtering"; . This is a complicated process. This film is characterized by natural color, good light transmittance and good heat insulation.
6. Magnetron sputtering film multilayer polyester film technology. This is another technical trend of high-end movies. By multi-layer extrusion technology, 240 layers of polyester films are stacked together to make a thermal insulation film with a thickness of only 0.05 mm, which has the characteristics of high visible light transmittance, good thermal insulation, long service life and no electromagnetic signal interference.
After reading the introduction of automobile series, do friends have a necessary understanding of how to tear off the automobile glass film? So, do your friends like the knowledge that Bian Xiao Auto introduced to your friends today? Car Bian Xiao believes that these content knowledge partners must have a good understanding, which is very useful for cars. Finally, I hope that the introduction of automobile system can solve the problem for friends.
Million car purchase subsidy