In breathing light, the red, green and blue led components used by Xiaomi 5S and previous Xiaomi models were cancelled, and they were replaced by LED components that can only emit white light. There is a capacitive fingerprint identification key in the center at the bottom of the screen, and there are two virtual keys on the left and right, which can set the key function in the system. The fuselage is made of polished stainless steel frame and buttons, with a pop-up SIM card installation slot on the left and volume up and down buttons and power/on/off screen buttons on the right.
The back of the fuselage adopts an arc-shaped back cover made of glass or zirconia ceramics, and the upper left corner of the back is respectively a two-color flash, a main camera and an auxiliary camera from left to right. Below the back is the electroplated milog, which has a mirror effect.
Xiaomi mobile phone 6 is equipped with 3350 mAh battery, which supports full-function NFC and infrared remote control. The 3.5mm audio interface was cancelled for the first time, and its data transmission, charging and audio output and input functions were replaced by USB Type-C interface. But there is no Type-C earphone attached to the box, only a Type-C to 3.5mm audio interface converter.
Xiaomi mobile phone 6 adopts Qualcomm Xiaolong 835 SoC, which is designed by Qualcomm and produced by Samsung Semiconductor. Equipped with 4GB or 6GB LPDDR4X running memory and 64GB or 128GB UFS2. 1 flash memory.
In terms of image system, Xiaomi mobile phone 6 is equipped with two12 megapixel cameras, of which the main camera sensor is Sony imx386 sensor, which supports optical image stabilization, and the sub camera sensor is Samsung S5K3M3. The camera module is the same as Xiaomi Note 3.
Xiaomi mobile phone 6 has three colors: bright black, bright blue and bright white, and there is also a limited edition bright silver exploration edition. Among them, bright white is sold less due to production control and other reasons, and most of them are black and blue in the market. Xiaomi 6 also released a black ceramic version, which is about 14g heavier than the normal version.
Extended data:
design
The appearance design of Xiaomi mobile phone 6 adopts four-sided technology, which makes the whole machine more visually fit and has a rounded feeling, and the stainless steel highlighted frame extends this whole feeling to the front. The design process also solved the problem of glass surface bonding. The screen size of mobile phone is 5. 15 inch, with narrow left and right sides.
The fingerprint recognition function of Xiaomi mobile phone 6 adopts IFS nonporous fingerprint reader developed by Ding Hui Science and Technology. Because there is no front pressure hole, the overall feeling is stronger. The mobile phone also supports splash-proof and waterproof, eliminating the earphone hole.