product performance
Human body pressure sensor: When the pressure is greater than 40kg, the circuit is connected with the seat, so as to avoid energy waste caused by opening the switch by mistake when no one is riding. The service life is 6.5438 0 million times, and the working temperature is-40℃ ~ 654.38 0.20℃.
Sensor short circuit/open circuit protection.
Heating delay: when the heating load is started, the delay is 5 ~ 10 second to ensure the starter is started.
The width of conductive electrode (1 1 strand silver-plated wire) is 18mm, which ensures good contact between carbon fiber and electrode.
Crimping joint: it connects the electrode with the wire, avoiding the disadvantages brought by welding methods, such as virtual welding, false welding, heat shrinkage of the wire sheath, bare wire, etc. The thermal protector is connected with the sheath, which greatly increases the bending resistance between the conductor and the protector.
The outer sheath adopts PET network management, which greatly enhances the wear resistance of the sling.
standard
Working voltage: (10.5 ~ 15V) or (22 ~ 28V).
Operating current: single pad (1.8 ~ 2.5A)
Working power: 15 ~ 30W
Temperature control: 30℃ (lower limit) ~ 70℃ (upper limit)
Heating material: high quality carbon fiber
Connector: AMP Company, USA
Warranty period: three years
Geometric dimension: can be customized according to customer's requirements (maximum 300×550mm).
Automobile seat air conditioning system
The heating and ventilation system of the car seat makes the car seat warm in winter and cool in summer, completely eliminating the trouble of Leng Xia heat in winter when drivers and passengers drive.
This product is the first set of self-developed and self-owned intellectual property rights built-in car seat heating and ventilation system in China, and its performance has reached the international level. At present, only ultra-luxury models are equipped with similar products on the market, and the market potential is huge. This product meets the needs of different seasons in North and South China, increases the selling point of vehicles and improves the added value of vehicle products.
The air conditioning system of automobile seat is mainly composed of air outlet device, breathable layer, pressure-resistant special material and wind power regulating device.
Features of this system:
Overvoltage protection, sensor short circuit/open circuit protection.
Heating delay: when the heating load is started, the switch will be turned on with a delay of 5 ~ 10 seconds to ensure the starter is started.
Cooling power consumption 12w/ seat, heating power consumption 50w/ seat.
Convenient installation and maintenance
Strong bending resistance
Low noise: 20 ~ 35 decibels