Sprinkler irrigation is naturally the best machine-specific sprinkler irrigation in Tamiya, but the price is too expensive. The main brands of sprinkler irrigation in China are 7CF and Keruimei. Compared with Tamiya, the particles of sprinkler irrigation in China will be larger. 7CF has more agents in China and more color choices, but the particles are very large. In some places, where the sales in Japan, America and Japan are not as wide as that in 7CF, it may be gone.
2. Preparation before sprinkler irrigation
Household sprinkler irrigation is poisonous ~! This must be clear to everyone. Please wear a mask before spraying. Generally speaking, paint shops sell them, and big paint shops have gas masks and activated carbon.
Please be sure to spray in a ventilated place, this is certain ~! Everyone must remember ~!
Third, the application of sprinkler irrigation.
The particles in sprinkler irrigation are relatively large, so be sure to shake them well before use. Generally speaking, you should shake them evenly for 3 to 5 minutes, which will make the particles you spray more delicate.
Before spraying, please try spraying in other places to test the air pressure of sprinkler irrigation and how much finger force is needed to press it.
Please note ~ Never spray directly on the parts, because it is easy to spray very thick. Start painting at a distance of 20 cm and 5 cm to 10 cm from the part. In the process of painting, move quickly and evenly to the parts until the parts are sprayed to about 5 cm, and then stop painting.
Please don't spray paint at once. Please spray it several times in layers to avoid being too thick. It is very important to spray as thin as possible every time, and then spray another layer when the surface is dry.
Please use cross spraying method when spraying. That is, spray one layer vertically until the surface is dry and then spray another layer horizontally.
If the surface is convex, please paint the corner that is not easy to spray first, so as to avoid painting too thick in the sprayed place after it is not sprayed.
Fourthly, post-coating treatment
After spraying, please turn the sprinkler head upside down and spray a small amount of paint left in the nozzle to avoid affecting the next painting.
Speaking of electroplating color and metallic color, it seems that it has always been the patent of pen spraying ~ but in fact, sprinkler irrigation can also spray a small amount of metallic color and electroplating color.
However, it is not enough to spray metallic color and electroplating color only by domestic sprinkler irrigation ~ conditional players still have to go to Tamiya's sprinkler irrigation.
One; Bottom color
Sprinkler players did not choose to make a metallic background color. There is only one way to spray irrigation with imitation chromium plating. It takes about 20 minutes to get to 25 yuan, which is the most expensive sprinkler irrigation in China ~
The effect of his spray is equivalent to the super silver background of the pen, but it is still slightly worse than the pen ~
Before using this sprinkler irrigation, please polish the surface of the parts without potholes, shake them well before using, and do not spray them in wet weather. If you are a Fujian player, please don't spray them during the typhoon season from June to September. If you are in Guangdong, don't spray them in the rainy season. Players in Shanghai should avoid the moldy rainy season in May and June, because once the air is wet, the effect of spraying them is dust, which is definitely a nightmare ~!
If you only spray silver, this sprinkler irrigation is enough ~ You can plate chromium with or without background color, and the hiding power of sprinkler irrigation is super strong ~ If you want to go to a low color system, choose bright black.
Two: metallic color
Generally speaking, only chromium-plated silver and zinc-plated gold can show the best metal color in domestic sprinkler irrigation. Note that galvanized gold is real gold, not khaki or dead yellow.
Of course, there are many metal flash nozzles to choose from in domestic sprinkler irrigation, but generally speaking, the particles are very large ~ spraying on real vehicles has a good effect, but it is very bad for a vehicle with only 1 ~ 100.
Electroplating silver and gold can be directly expressed by household sprinkler irrigation. If you spray gold, you must apply a chrome-plated background color, which will be very effective.
If you want to spray other metallic colors, you must go to Tamiya for sprinkler irrigation ~
Putting on chrome-plated silver and spraying Tamiya's metallic blue or red can be said to be quite sensible ~ much better than spraying metallic blue directly ~
Three: Matters needing attention
Please note that the electroplating color of sprinkler irrigation in China is easy to lose its luster ~ so please finish spraying all the metallic colors to be sprayed at the first time and apply bright paint to protect it immediately ~
If you can't finish it in one day, please spray it alone ~ It's best not to spend the night plating silver ~ Especially in wet places in the south, the strong reflective luster of chrome-plated silver will disappear after one night ~
The choice of background color is very important for coloring, especially for domestic sprinkler irrigation players, because it is related to the success or failure of your coloring.
Common background colors:
Matt hey, light gray, dark gray will be silvery white (it is not recommended that white ~ white is the most corrosive in sprinkler irrigation)
Electroplating background color:
Imitation chromium-plated sprinkler irrigation (I will explain the spraying method of electroplating color in detail in the next class)
Selection of background color:
Cleaning spray method:
Most people still like to play clean The choice of this background color should be based on the brightness and concealment of the color you want to spray.
If you want to spray bright red, the brightness of bright red is high, and the concealment is not very strong. Here, you should choose the color with strong concealment and high brightness as the background color.
Generally, silvery white or bright yellow can be used. Bright yellow is not very bright, but it can make red more bright. When spraying red, I usually choose a spray irrigation machine that imitates zinc plating, because its particles are more delicate and the golden background can also make a red feeling.
If the spray is blue, not bright but not well covered, you can choose gray as the background color.
Well-covered sprinkler irrigation such as black, gray and silver can ignore the background color.
Select the old background color.
Those who like heavy taste can choose matte black as sprinkler irrigation. Because the matte black particles are coarse, it can make a good cast iron effect. Gray is also a good choice.
Are you satisfied with this answer? hahaha