1. Requirements for papers and publications According to the spirit of the Provincial Department of Personnel's "Notice on Adjusting Professional and Technical Qualification Conditions for Paper Publishing and Publication Grade Classification Regulations" Guangdong People's Development (2005) No. 300, the requirements for papers and publications can be briefly summarized. For: Application for Advanced: Publish more than 2 papers in professional journals with CN number and ISSN number or publish more than 1 paper in professional journals with CN number and ISSN number, and write to solve complex technical problems Have more than 2 high-level special technical analysis (demonstration) reports. To apply for intermediate level: you must publish 1 paper in a professional journal with a CN number or an ISSN number, or more than 1 paper in a professional journal with a CN number or an ISSN number, as well as a special technical analysis written to solve a technical problem ( Demonstration) and more than 1 report. There are two ways to publish papers. By submitting papers yourself, there are often fewer chances of being accepted; you can also find an agent to publish papers, which is faster and more convenient! 2. Apply for high and intermediate professional titles, academic qualifications and qualifications according to several opinions of the province on deepening the reform of the professional title system (Guangdong people (issued [2003] No. 178), the academic and qualification requirements for applying for high and secondary professional titles are adjusted as follows: 1. Senior: Those with a doctoral degree, or those who have obtained intermediate qualifications and have been engaged in professional and technical work for three years or more, reaching deputy senior or no distinction Those who meet the qualification requirements for deputy senior qualifications can apply for the review of deputy senior qualifications according to the prescribed procedures. 2. Intermediate level: (1) After graduating from a university and obtaining assistant-level qualifications, the number of years of professional and technical work is adjusted from 4 years to 3 years; those who have not obtained assistant-level qualifications must engage in professional and technical work for more than 5 years. (2) After graduating from a junior college and obtaining assistant-level qualifications, the number of years of professional and technical work is adjusted from 5 years to 4 years; those who have not obtained assistant-level qualifications must engage in professional and technical work for more than 8 years. (3) Those who have graduated from technical secondary schools will no longer be subject to the requirement that "graduates from technical secondary schools and have been engaged in professional and technical work for more than 20 years, and after obtaining assistant-level qualifications, have been employed in assistant-level positions for more than 5 years." Anyone who has been engaged in professional and technical work for more than 15 years will no longer be implemented Those who have obtained assistant-level qualifications, or those who have engaged in professional and technical work for more than 8 years after obtaining assistant-level qualifications, may apply to review and review intermediate-level qualifications to edit the standard professional title papers in this section. Papers with professional titles must first be original. Within the scope of the topic, say what others have not said and mention what others have mentioned. We must innovate, make discoveries, and have unique and objective and realistic views. Just repeating and imitating other people's opinions cannot be called an academic paper. For example, in the field of social sciences, originality often occurs in the following three ways: (1) Inheriting and developing previous theories in combination with new social practices, for example, in the construction of socialism, combining China's national conditions and improving Marxism; (2) Research newly discovered materials, which is often the case in history and archeology; (3) Obtain new results by collecting and sorting out previous achievements, such as the study of the history of philosophy and language. Originality is the life of [1]. Academic papers should also be scientific and professional. Scientificity means that the paper must be based on detailed, reliable, and accurate materials. The viewpoints and conclusions it makes must not be arbitrary or subjective, but must be rigorously scientifically demonstrated and can stand the test of practice. The paper is clear and well-structured, has strong persuasiveness and appeal, and deeply reveals the internal connections and laws of objective things, that is, it is reasonable, well-founded, and orderly. Professionalism means that the paper must have the characteristics of a certain discipline and major from the title, material selection to text expression. It must understand the "market" and use "jargon". For example, library science papers often need to use headings, annotations, Secondary literature, information retrieval language and other professional vocabulary. Legal papers commonly use legal persons, subject will, arbitration, litigation rights, legal doctrine of crime, etc. Academic papers don’t have to be understood by everyone. A good academic paper is a high degree of unity and combination of originality, science, and professionalism. Features of writing professional title papers: 1. Papers written in accordance with the scientific research projects of the unit, the fund projects of the superior department, and the research direction of the teaching and research section must be written in a rigorous academic paper style. 2. Writing purely professional title papers must meet the requirements of the journal and the columns of the journal itself to ensure that it closely follows the pace of the times and is in line with the current scientific research direction. 3. The word count should not be too long or too short. Generally speaking, if you publish in a national publication, the word count should be around 4,000-5,000, and if you want to publish in a core publication, the word count should be 6,000-8,000.
4. The format standards should be written according to: title, subtitle, abstract, keywords, main text, references, author introduction, English title, English keywords, and English abstract. 5. Don’t be too biased in your paper’s point of view. This is very important. The necessity of editing the professional title thesis in this paragraph (1) The professional title thesis is one of the documents proving the work level and work performance; (2) One of the necessary documents for promotion of professional titles and salary increase; (3) The rigidity of reviewing the intermediate and senior series of professional titles One of the indicators; (4) A necessary way to externally publicize units and individuals, and conduct academic and scientific research exchanges; (5) It is the trend of modern academic development. Edit this paragraph The selection of senior professional titles requires the publication of core papers. Currently, there are 7 core journals (or source journals) selection systems in China: Peking University Library "Chinese Core Journals" Nanjing University "Chinese Social Sciences Citation Index (CSSCI) Source Journals" Chinese Science "Chinese Scientific and Technological Paper Statistical Source Journal" (also known as "Chinese Science and Technology Core Journal") of the Institute of Technical Information, "Chinese Core Journal of Humanities and Social Sciences" of the Documentation Information Center of the Chinese Academy of Social Sciences, "Chinese Science Citation Database (CSCD) Source of the Documentation and Information Center of the Chinese Academy of Sciences" "Journal" "Chinese Journal of Humanities and Social Sciences Core Journal" of the Chinese Journal of Humanities and Social Sciences "China Core Journal Selection Database" under construction by Wanfang Data Co., Ltd. The three major international indexes: SCI "Science Citation Index", Science Citation Index EI "Engineering Index", The Engineering Index ISTP "Index to Scientific & Technical Proceedings" Professional title paper publication process: There are mainly the following two types: 1 , Submit a manuscript - send an acceptance notice - pay the page fee - receive a sample journal 2. Submit a manuscript - send an acceptance notice - receive a sample journal - send the manuscript fee Edit the format and standard title of the professional title paper in this paragraph (try to be as short as possible, no longer than 20 words!) Author 1, Author 2 (1. Author’s unit, provincial and municipal zip code; 2. Author’s unit, provincial and municipal zip code) Abstract: The abstract of a scientific journal mainly consists of 3 parts: problems to be solved, process and method, and conclusion . Generally, it should be about 200 words. Requirements for writing Chinese abstracts: ① The abstract should exclude content that has become common knowledge in the subject field; ② Do not include content that should appear in the introduction in the abstract, and generally do not interpret or comment on the content of the paper (especially self-evaluation); ③ Use the third person. It is not necessary to use the words "this article, the author", "we, the author, etc." as the subject to facilitate editors and publications; ④ Abbreviation codes must be added when they first appear, except for those that can also be clearly understood by adjacent professional readers. Note. (The quality of the abstract directly affects the citation rate of the paper and the inclusion rate in indexed journals such as EI) Keywords: Keyword 1; Keyword 2; Keyword 3 (requires 3-8 keywords, each Separate the words with semicolons ";") CLC classification number: According to the keywords, search from the fourth edition of "Chinese Library Classification" NAME Name1, NAME Name-name2 For example: WANG Xiao - yan) (1 .Department, City, City Zip Code, China; 2.Department, City, City Zip Code, China) Abstract: For international communication, the paper must be accompanied by an English abstract. The English abstract should be a translation of the Chinese abstract; please do not use "We". Wait for the first person to be called the subject to facilitate editing and publication. Key words: keyword1; keyword2; keyword3 (requires 3-8 keywords; separated by semicolons; all in lowercase, except for abbreviations) 1 Introduction (the following content is arranged in order, Both columns are acceptable) Introduction content 2 Title text content.
① Length: generally around 6,000 to 8,000 words; ② Symbols: Variables in the text and charts must be in italics, English abbreviations, measurement units, function names, arithmetic symbols, brackets, etc. must be in regular font, and foreign letters that are easily confused and Please indicate the symbol. The units of measurement in the article shall all use the "Legal Units of Measurement of the People's Republic of China and the State"; ③ Illustrations: There must be a sequence and title of the figures, the illustrations must be well drawn, and the text of the figures must be clear; illustrations and photos are not allowed Copies must be fine drawings and original photos; figures and tables should be arranged in corresponding positions in the text; ④ Tables: Table order and table names must be included, and a three-line table should be used (the left and right ends of the table are not sealed), and decimal points should be used Alignment type; ⑤ Formula: The formula must be entered in character format. (Please proofread the manuscript carefully to avoid spelling errors, missing words, multiple words, etc., and use punctuation marks correctly.) 2.1 Title Text content. 2.1.1 Title Text content. 3. Conclusion. Contents of the text. References: Manuscripts must have references. They are limited to publications that have been read by the author and cited in the paper and have been officially published. Please do not cite unpublished materials; number them in the order they are cited in the article; list the main references. Yes, generally no more than 15 items; the literature letter identification must be given! ! ! Please pay attention to the description of punctuation marks! (If you refer to a paper in this journal, please list it in the references, thank you!) [1] Main person responsible. Document title [M]. Place of publication: publisher, year of publication. Starting and ending page numbers (optional). ( Monograph [M]—monograph) [2] Main person responsible. Document title [C]. Place of publication: publisher, year of publication. Starting and ending page numbers (optional). (Collections [C]—collections) [3] Extracted documents Main person responsible. Title of the extracted document [A]. Main person responsible for the original document. Title of the original document [C]. Place of publication: publisher, year of publication. Starting and ending page numbers of the extracted document. [4] Main person responsible. Title of the document [D] . Place of publication: Publisher, year of publication. Starting and ending page numbers (optional). (Dissertation [D]—dissertation) [5] Main person responsible. Title of the document [R]. Place of publication: Publisher, year of publication. Starting and ending page numbers (Optional). (Report [R]—report) [6] Main person responsible. Document title [J]. Journal title, year, volume (issue): starting and ending page numbers. (Journal article [J]—journal) [7 ] Main person responsible. Document title [N]. Newspaper name, publication date (edition). (Newspaper article [N]—newspaper) [8] Standard number, standard name [S]. (Standard [S]—standard) [9] Main person responsible. Electronic document title [electronic document/carrier type identification]. Source or available address of electronic document, publication or update date/citation date (optional). (Electronic document: database [DB], computer Program [CP], electronic bulletin [EB]; carrier type and its identification: online network OL, magnetic tape MT, optical disk CD, magnetic disk DK.
Note: DB/OL—database online; DB/MT—database on magnetic tape; M/CD—monograph on CD-ROM) [10] Main person responsible. Document title [Z]. Place of publication: publisher, year of publication. (Z—Undefined type of document identifier) ??[11] Patent owner. Patent title [P]. Patent country: patent number, publication date. (Patent [P]—patent) ★ Following [1]-[9] Examples of recording various types of documents for your reference [1] Liu Guojun, Chen Shaoye, Wang Tao, etc. Library Catalog [M]. Beijing: Higher Education Press, 1957. 15-18. [2] Xin Xi. Information Proceedings of the International Symposium on Technology and Information Services: Collection A [C]. Beijing: China Society Press, 1994. [3] Zhong Wenfa. Application of nonlinear programming in the allocation of combustible poisons [A]. Zhao Wei. Operations Research Theory and Application--Proceedings of the Fifth Conference of the Chinese Operations Research Society [C]. Xi'an: Xi'an University of Electronic Science and Technology Press, 1996.468-471. [4] Zhang Zhusheng. Invariant Sets of Differential Semidynamic Systems [D]. Beijing: Institute of Mathematics, Peking University, 1983. [5] Feng Xiqiao. LBB analysis [R]. Beijing: Tsinghua University Nuclear Energy Technology Design Institute, 1997. [6] Shi Zhu, He Xingui. Application of the pecking order method in software evaluation [J]. Computer Engineering and Design, 2002, 23(2): 45-46. [7] Xie Xide. New ideas for creative learning[N]. People's Daily, 1998-12-25. [8] GB/T169159-1996, Chinese Pinyin Basic rules of orthography [S]. [9] Wang Mingliang. About Chinese Journal Standards [EB/OL]. Fund project: Fund project name (number) (if it is a fund-supported project, please give it. This journal is very important for the National Natural Science Foundation of China). Funds, national "863", "973" and other high-tech research and development plan funds, provincial and ministerial science funds, and local natural science funds are prioritized for publication!) Received date: xxxx-xx-xx Author profile: The first author's name (year of birth -), gender (ethnicity - Han can be omitted), × province (city) × county, professional title, degree, main research direction is...; other authors' introductions are the same as above, or: name, professional title ,Bachelor of Science. (In order to determine the age, gender, ethnicity, and place of birth of national statistical talents) Edit this paragraph Necessary conditions for professional title evaluation Anyone who participates in the quality professional senior engineer qualification evaluation examination organized by the province and obtains qualified results can apply for promotion to quality Evaluation of professional senior engineer qualifications. The relevant issues are now notified as follows: 1. Contents of submitted review materials 1. "Professional and Technical Position Submission Form" in 1 copy; 2. "Senior Professional and Technical Position Qualification Evaluation Brief Form" in 3 copies; 3. "Recommended Review of Senior Majors" "List of Qualified Personnel for Technical Positions" in 20 copies (for easy organization, please print and copy on A3 paper); 4. Original academic certificates, award certificates, papers, books and other materials that can prove your qualifications, abilities and levels; 5 .Foreign language test scores; 6. Computer application ability certificate; 7. Current professional and technical position qualification certificate and original letter of appointment; 8. If the series of evaluation is changed, the "Professional and Technical Position Submission Form for Change of Series Evaluation" must be filled in and the original "Professional and Technical Position Submission Form" must be filled in. Original copy of "Position Submission Form"; 9. "Six Disclosure Supervision Cards for Recommendation for Promotion to Professional and Technical Positions" in duplicate; 10. "Registration Form for Personnel Applying for Senior Engineer Qualifications" and a floppy disk. 2. Submission procedures and requirements 1. Those who meet the application conditions and pass the examination scores shall submit an application and fill in the relevant materials. After democratic evaluation, unit review, and review by the competent department, the competent department will sign an opinion and stamp the qualified materials. Seal, signed by the person in charge, and sent to the reporting department. 2. The reporting departments (municipal personnel bureaus and municipal quality and technical supervision bureaus or provincial departments) must carefully review the application materials and strictly control them. If they meet the requirements, they will be listed in the "Professional and Technical Title Evaluation Form" and "Evaluation Brief Form" Please sign and stamp the submitted opinions in the "Submit Department Opinions" column. After the signature of the person in charge, submit them to the Senior Review Committee on time together with other relevant review materials.
3. The application materials must be complete in procedure and content, and the filling in of each form must comply with the requirements of the "Form Filling Instructions". The form must be filled out and printed in a formal and neat manner, with neat and clear handwriting, and no alterations, omissions or missing pages are allowed. If originals are required, copies may not be substituted