gloves for work
gloves for work, a lot of work needs to be done for food hygiene and safety issues or for jobs that are isolated from bacteria. Because of work needs, gloves are often worn all day, such as doctors, nurses, laboratory staff, etc. The gloves for work are shared below. Gloves for working belt 1
1. High-temperature resistant gloves
The traditional methods of high-temperature resistant gloves are all made of asbestos materials, which can also be divided into two-indicator and five-finger types. Nowadays, fire-retardant white canvas or recognized fire-retardant textiles are generally used to make fire-retardant gloves
Because the traditional glass fiber cotton gloves are more irritating to the body and skin, they are rarely used now. This kind of gloves is suitable for smelters or other kiln technical jobs, and the practical effect is better.
2. Anti-static gloves
Anti-static gloves are generally made of fabrics with conductive chemical fibers, and can also be hand-woven from long chemical fiber elastic nylon.
A glove must be attached with polyurethane adhesive on a part of the palm of the hand, or with polyurethane epoxy resin on a part of the fingertip or with high-pressure polyethylene coating on the surface of the glove. Gloves made of conductive chemical fibers can make the electrostatic induction gathered in the hand quickly fade away.
The other glove with polyurethane material or high-pressure polyethylene coating is not easy to cause floating dust and electrostatic induction. Anti-static gloves are mostly used in product quality inspection, packaging and printing, assembly of electronic equipment, weak current, instruments and meters, and detection of various scientific research administrative organs.
3. Cut-proof gloves
Cut-proof gloves are used to prevent vibration-induced physical harm caused by vibration. In forestry and fruit industry, engineering construction, mining, transportation and other units, holding vibration special tools, such as chain saws and rock drills, is very easy to cause vibration occupational hazards-"white finger disease".
This kind of gloves has a certain thickness of plastic foam, natural latex and gas barrier on the palm surface to digest and absorb the vibration. The thicker the palm finger pad is, the greater the air content is, and the better the actual effect of shock absorption is.
4. Disposable PE gloves
Disposable PE gloves are made of natural rubber, which can prevent the goods from being damaged by human static electricity during processing. It can protect the goods from environmental pollution and harm caused by finger residues, smoke, sweat and oil stains during processing, and maintain the goods reasonably. Among them, the common clean gloves in clean rooms are polyethylene (PVC) gloves.
The above are the common types of labor gloves. You can decide what kind of labor gloves to use according to the specific use scenarios, so that the labor gloves can give you better protection. Gloves for work 2
1. Clinique dishwashing gloves.
this is one of the gloves with good feedback from many people. Its most prominent feature is that it is durable, not easy to break, and the price is more favorable and practical, which has won the favor of many people.
2, nitrile gloves.
this glove is not natural rubber, but synthetic rubber, which is more durable than natural rubber. Moreover, some data show that even if you are used to washing dishes with hot water, there will be no problem in using this glove, which is quite durable.
3. Some Korean latex household gloves.
natural latex and PVC material are used to effectively prevent all kinds of washing erosion. According to the ergonomic design of hands, fingers can move freely, and the palm is designed to prevent slipping when encountering water. Moreover, it can double care for the skin of hands, and it does not leave the smell of rubber after wearing, so that we can live a good mood every day. Gloves for work 3
What's the use of gloves for work
In fact, the' warm sweating' of hands is often not as much as nervous sweating. Tactical gloves have a good ventilation design and will not be as stuffy as rubber gloves. Besides, gloves can be put on and off at any time when necessary. As the part with the largest range of human motion and the highest frequency of use, the probability and harm of hand and foot injuries are very high. Since cross-country combat knows to wear good shoes, hand protection is equally important.
To give the simplest example, there are two main methods of grounding and buffering in the event of an emergency fall during an impact and a leap: touching the ground with the butt of a gun or using the palm of your hand. These are the two parts that can minimize the impact when falling.
But today's tactical gunstocks are mostly telescopic and folding structures, and the strength is not so high, so it depends on the palm of your hand. You can't decide where the battle will take place. Not all the places where you fall are bright and clean basketball courts.
Even deserts and mountains in the Middle East/Asia are gravel and grass roots in the same place. With dozens of pounds of combat load and no gloves, just rub it down in one breath? Muh...no thanks, I'd better try the butt again.
some people probably say that this is the arrogance of a young soldier. A cannonball flying over your head, a thunder rolling in your crotch, a big scar on your head, and your life is over. What's the matter of rubbing your skin? Of course, if you don't even have the style of hard sacrifice, you can't fight. However, avoiding harm reasonably does not mean being lazy and working hard.
Of course, seriously speaking, if you are really confronted with automatic fire, you will not hesitate to jump down again and again with your hands even if there is a nail plate on the knife bed below. Maybe adrenaline will cover up everything in the first few minutes. But when it's time to fight? Ten fingers are connected to one heart, and a minor illness is fatal.
The nerves in the hand are concentrated and sensitive, distracting your attention all the time, while the hands can't rest for a moment, always affecting the affected area. Not to mention that when you notice the wound on your hand, you have inevitably touched countless blood stains, dirt, grass juice, rust, poisonous insect body fluids before, and it may be too late to think of alcohol and bandages.
If we change the battlefield environment-we can only use our hands and feet to walk through the temperate dense forest where shrubs are everywhere and thorns are everywhere, and sharp branches test every inch of exposed skin; In the cold rain and snow weather, I can afford wrinkled white hands and hold the cold metal all day, and my fingertips can be so dull that I can't even touch the speed machine;
It's even more common for light infantry to lift heavy objects. Overheated gun barrels, overturned iron ammunition boxes, temporary handles bent with thin iron bars, and deformed car doors have no time to pat them under fire. In contrast, if you have reliable hand protection, you can not only effectively avoid injuries and pains, but also give full play to the speed, strength and dexterity of combatants, and you have no scruples when you "start".
A small switch or decomposition pin on weapon equipment can't be pressed directly with your fingertips, so you put on gloves and push it down. However, the shortcomings of gloves are mainly that they affect the touch of fingertips, which is not conducive to fine operation (picking up small objects, writing, and operating keyboards). The coping methods are generally to adopt or modify gloves with half fingers or partial half fingers (cutting off the ends of thumb/forefinger).
the concept of "personal protection" has long been not only aimed at bullets. Due to exposure to the harsh environment of war, the loss of staff and combat effectiveness is far more than being directly killed by enemy fire.
in addition to tactical gloves, a pair of goggles, a pair of knee pads, a pair of earplugs, a few extra pairs of cotton socks, a small bottle of beriberi/talcum powder and a set of drinking water bags, all of which have no less effect on maintaining the combat effectiveness of a frontline worker than a set of bulletproof protective gear.