The steps for making a tulip night light photo frame are as follows:
Materials required: night light base, transparent acrylic plate, ultra-thin flashlight, water spray glue, tulip template, brushes and paints, scissors, PVA glue.
1. Prepare ground protection materials, using transparent acrylic sheets. Using the template, draw the shape of the picture frame, slightly larger than the base of the night light.
2. Use brushes and paints to draw tulip templates, which can be adjusted according to personal preferences.
3. Cut out the painted tulip template, and then cut out the transparent acrylic plate into a photo frame shape.
4. Use water spray glue to paste the painted tulip template on the transparent acrylic board.
5. Set the processed transparent acrylic plate aside to dry.
6. Put the night light base aside, open the base and put it into the base.
7. Use PVA glue to apply a layer of glue on the back of the frame, and then paste the tulip picture on it.
8. Place the transparent acrylic plate on the night light base. Since acrylic is not easy to break, you can use it with confidence.
9. Place the ultra-thin flashlight on the base, adjust the angle to illuminate the back and make final adjustments.
Notes on making tulip night lights
1. Make sure the materials used are of high quality and the transparent acrylic sheet should not be too thin, otherwise it will break easily.
2. When cutting transparent acrylic sheets, be careful to avoid cutting your fingers.
3. When applying water spray glue, pay attention to apply it evenly and avoid shaking, otherwise it will easily deform the painted picture.
4. When arranging the night light base, be careful not to collide or damage the light base.
5. When fixing the position of the ultra-thin flashlight, be careful not to install the flashlight too tightly.
6. Finally, when the night light is finished, wipe the light base and transparent acrylic plate with a rag to ensure it is clean and bright.