Patent of building formwork

Hello! Fair-faced formwork also belongs to building formwork, but the requirements are higher. Generally speaking, using ordinary building formwork, concrete needs to be demoulded after molding and plastered after demoulding to achieve the effect of drywall, which is the "plastered wall" you see when you buy a house. However, if the fair-faced formwork is used, the wall surface will be smooth and flat after concrete molding, and the effect of fair-faced wall surface can be achieved directly without plastering after demoulding. Therefore, the performance of fair-faced formwork and the technical requirements for workers are stricter, and the project cost will be higher than that of general building formwork. But this was before, and now you don't have to worry at all. CITIC Lvjian Super Composite Template has obtained many national patent technologies. It uses waste recycling technology to recycle the formwork, which not only has higher performance than the traditional formwork, but also can directly achieve the effect of fair-faced concrete after demoulding, which is very convenient. The most important thing is that the unit price is lower than the traditional template, but the turnover times are 10 times that of the traditional template. Template matching scheme can be made first according to the project, and then template specifications can be customized, which saves time and effort completely. It is a new green building material, which has passed the EIA test and is favored by the industry. I hope my answer is helpful to you.