Who invented the sugarcane peeler? How much is one?

The sugarcane leaf peeler was invented by Mr. Cai of Taiwan Province, and obtained the patent of 1998. Characterized in that it mainly consists of a motor, two lead-in rollers, a cutting seat, a cutter seat, two lead-out rollers, a pressure bar and a foot seat, wherein a transmission mechanism is fixed on the pivot of the motor; after the motor drives the rollers, the circumference of the lead-in rollers is approximately equal to the length of sugarcane cutting, and they are arranged up and down and are sleeved by the pivot. In addition, one side of the roller is provided with a transmission mechanism driven by a motor to drive the two rollers to rotate synchronously and reversely; The cutting seat is a polygonal body composed of several pieces, with a polygonal cutting hole in the center, and each piece of shell correspondingly forms different scraping angles. Assembly holes are respectively arranged at appropriate distance positions vertically corresponding to each piece of shell, and an outlet hole is arranged behind the assembly hole, which is connected with an arc-shaped guide piece, and the cut skin can fall out along the guide piece and the outlet hole; The tool holder is provided with a fixing piece fixed on the assembly hole, a sleeve and a shaft sleeve are arranged in the central hole of the fixing piece, a spring is arranged in the shaft sleeve, and a tool capable of automatically adjusting the height of the tool holder is fixed at the bottom; Two draw-out rollers arranged on the output side of the cutting base in the vertical direction are fixed on the base through corresponding pivots, and one side is provided with a transmission mechanism driven by a motor; The pressure bar is arranged at an appropriate distance on the output side of the lead-out roller, and its bottom end is slightly lower than the inner surface of the lead-out roller. The better one is over 700, and the cheaper one is over 300 and over 500.