1, cooking without water, food heating as required. Solution: Drain the water and heat the food according to the instructions of the rice cooker.
2. The rice cooker has no inner pot. Solution: put it back in the inner pot.
3. The food in the rice cooker is dried or burnt, which leads to overheating. Solution: Repair the sealing ring.
The display board of the rice cooker is broken. Solution: The display board can be replaced.
The temperature controller of the rice cooker is out of order. Solution: Replace the thermostat of the rice cooker.
6. The pressure sensor of the rice cooker is out of order. Solution: Replace the pressure sensor of the rice cooker.
7. The lid microswitch of the rice cooker is not properly installed or damaged. Solution: Re-adjust or replace the cover microswitch.
8. The temperature sensor of the rice cooker is improperly installed or damaged. Solution: Re-adjust or replace the temperature sensor.
Jiuyang iron pot rice cooker is made of pure iron and weighs 3. 1 kg. The innovative design of the "convection ring" in the iron pot liner makes the rice boil and roll from top to bottom from outside to inside twice, forming a "convection double boiling", and the rice is heated more evenly.
Extended data:
Main functions of Jiuyang iron pot rice cooker:
1, recipes are optional.
Stove cooking, standard cooking, instant cooking, coarse grain rice, porridge, porridge/soup, cooking, cake.
2. Rice varieties can be selected.
You can choose according to your favorite rice species: brown rice, long grain rice and short grain rice.
3, the taste is optional
Can be selected according to personal taste: standard, soft, gluten.
4. Dating function
You can make an appointment 24 hours a day and eat whatever you want.
Troubleshooting methods for common faults of rice cookers;
Usually, when the rice cooker is used for more than two years, the metal at the power connector is easy to oxidize or loose in contact. In this way, the connection between the plug and the socket is easy to catch fire or heat, which will cause the rice cooker to burn out if it is not checked.
The method of attention is: always check whether the power plug socket has oxide layer and looseness before using the rice cooker. If there are these phenomena, generally scraping with a knife or wiping with sandpaper can play a role in maintenance; The loose part can be repaired by coating "502" glue or silicone rubber.
Usually, when cooking, water overflows carelessly, or the bakelite socket gets wet due to weather changes, or the bakelite seat is gradually burned due to over-frequency insertion and fire jumping, which leads to the decline of bakelite insulation resistance. This situation can be prevented as long as you pay a little attention at ordinary times.
Sometimes, because the inner pot of the rice cooker is not flat, the inner pot and the heating plate are suspended, which leads to the failure of heat transfer and the burning of the heating plate. This situation can be avoided as long as you pay attention to turning the inner pot when you put it in.
In addition, sometimes the power will not be cut off after cooking. In this case, the spring in the magnetic control switch of the rice cooker loses its elasticity, which leads to the inability to quickly cut off the power supply after the heat-sensitive magnetic block loses its magnetism when the rice cooker reaches 103℃. The solution is to restore the elasticity of the spring as much as possible and replace it with a new spring.
reference data
Iron pot rice cooker _ Baidu Encyclopedia
Rice cookers _ Baidu Encyclopedia