The difference lies in the degree of automation, whether manual assistance is required, working principles, and different structures.
1. Safety performance
1. After the straw baler equipment is installed, the ground protection terminal in the electric control box must be connected to the ground with a single wire with a diameter of not less than 16 square millimeters. Angle iron (the grounding protection angle iron is installed by the customer). Failure to connect the grounding protection prohibits the operation of the equipment. Regularly check whether the grounding protection wire is well connected.
2. Fire extinguishers and other fire-fighting equipment should be placed near the equipment of the semi-automatic straw baler, and operators should know how to use fire extinguishers; if smoke or other abnormal conditions occur on site or in the equipment, use fire-fighting equipment in a timely manner and Call the fire alarm; Children and unrelated persons are prohibited from being near the equipment when the equipment is running to avoid causing accidents.
2. Manual assistance
1. The straw baler is a fully automatic equipment.
2. Semi-automatic straw baling machine requires manual assistance in some steps.
3. Working principle
1. The straw baler uses the hydraulic principle to compress straw, straw, etc. into blocks, which is conducive to the environmental protection of straw storage, transportation and utilization. equipment.
2. The semi-automatic straw baler is designed according to the characteristics of straw. Packaging objects include wheat straw, corn straw, soybean straw, rice straw and other agricultural product straws. Suitable for large-scale breeding farms, straw recycling companies and feed production.
IV. Structure
1. The straw baler includes a bracket with a bottom plate and front and rear side baffles. A jack is installed on the bracket. The jack has a piston rod and the right end of the piston rod. A vertical pushing plate is connected, and a pushing slat is connected to the right side of the pushing plate, and the gap between adjacent pushing slats is a rope groove on the board.
2. The right end of the bracket of the semi-automatic straw baler has a discharge port. The right end of the bracket at the discharge port is hinged with a door panel. The left side of the door panel is connected with a door slat, and there is a gap between adjacent door slats. It is the rope groove on the door; the cavity surrounded by the front and rear side baffles, the pushing plate mountain and the bottom plate is the feeding chamber, and the cavity surrounded by the front and rear side baffles, the pressing upper baffle, the door panel and the bottom plate is the extrusion material cavity; the door panel and the right end of the bracket are fixedly connected with a locking device.
V. Use
1. Straw balers are now widely used in the agricultural and animal husbandry industries, as well as various types of straw balers, waste paper factories, old recycling companies and other units and enterprises, which are harmful to the environment. And the protection of resources has played a huge role.
2. The semi-automatic straw baler is suitable for packaging and recycling old waste paper, plastic straw, etc. It is a good equipment to improve labor efficiency, reduce labor intensity, save manpower, and reduce transportation costs.