Where is the slime dryer better?

Gongyi city Nanyang slime dryer is mainly composed of heat source, dispersing device, belt feeder, feeder, drum, belt unloader, induced draft fan, unloader and power distribution cabinet. The working principle of the coal slime dryer is as follows: wet coal slime, due to its certain viscosity, is divided into the following working areas after entering the dryer during the drying process: one is the material guide area, where the wet coal slime contacts with high-temperature hot air and quickly evaporates water, and the material is guided to the next working area when it is not bonded under the action of the large guide angle backup plate; ? Second, in the cleaning area, wet coal slime is picked up by the copying plate to form a curtain state, which is easy to form the phenomenon of sticking to the cylinder wall when blanking. In this area, because the equipment is designed with a cleaning device, the cleaning device cleans the substances attached to the inner wall very reasonably. In this process, cleaning equipment is very important for materials. The agglomeration of pellets also plays a role in crushing, thus increasing the heat exchange area and improving the drying rate; The third is the inclined lifting plate area, where the wet slime has been? In a loose state, the water content is low, and the material has no bonding phenomenon in this area. After heat exchange, the material reaches the required moisture state and enters the final stage. The discharge area; The fourth is the discharge area, where the roller has no copying plate, and the material rolls and slides to the discharge port in this area to complete the whole drying process.

Second, the main characteristics of slime dryer

1, the dryer has strong overload resistance, large capacity, low oil consumption and low drying cost;

2. By adopting the downstream drying mode, flue gas and wet materials enter the dryer from the same side, and high evaporation intensity can be obtained by using high-temperature flue gas, and the outlet temperature of the dryer is low and the thermal efficiency is high;

3, the operation parameters can be changed according to different material properties, so that the materials form a stable and completely broken fabric curtain in the drying cylinder, and the mass and heat exchange are more sufficient;

4. The new feeding and discharging device eliminates the feeding blockage, discontinuity, unevenness and material return of drum dryer, and reduces the load of dust removal system;

5. The new internal structure strengthens the cleaning and heat conduction of the dispersed materials, eliminates the material sticking phenomenon on the inner wall of the cylinder, and has stronger adaptability to the moisture and viscosity of the materials;

6. Is the dryer realized? "? Zero horizontal thrust? ”？ The abrasion of the blocking wheel is greatly reduced, and the cylinder runs stably and reliably;

7. Has the dryer been used? "? Self-aligning roller device? ”？ , so that the matching between the supporting wheel and the rolling ring is always in line contact, which greatly reduces the wear and power loss;

8. The granularity and moisture content of the product can be controlled according to the user's requirements, and the moisture content of the product can be reached when the slime is dried. 8%? Below, the granularity can be controlled in? 8mm？ Below. ?

Gongyi city Nanyang Machinery Manufacturing Company was established in 1988, which is a machinery manufacturing enterprise jointly funded by the Municipal Economic Commission and Nanyang Trading Company. After the restructuring, the enterprise developed rapidly with a registered capital of 2.6 million yuan. Our factory integrates scientific research, production and marketing. Enterprises are market-oriented and rely on scientific and technological innovation and management innovation to promote development. It mainly produces slime/sludge dryer, fly ash dryer, gypsum dryer, chicken manure dryer, river sand/slag/quartz sand dryer, distiller's grains dryer, compound fertilizer production line, ball mill, brick-free machine, briquette equipment and pulverizer. Strong technical force, products have passed the quality inspection of technical supervision departments, and enterprises have won many honors for more than ten years. Products are sold to more than 20 provinces, municipalities and autonomous regions in China, and exported by foreign trade companies. Our factory is committed to establishing partnership with colleagues from all walks of life, building industry brands with decades of professional quality and sincere Excellence, and serving you wholeheartedly. Warmly welcome colleagues from all walks of life to visit and guide! Welcome to visit, negotiate and buy! Honesty-the foundation of an enterprise, innovation-the only way for development, fairness-combining work and rest, and win-win situation-let's develop * * * brilliance together.