Is Bayer anchor point anti-deformation gypsum board the best gypsum board? Home improvement designer recommended it to me.

Gypsum board is widely used in all kinds of indoor decoration because of its excellent properties such as light weight, fire prevention and sound insulation. At the same time, due to the inherent characteristics of gypsum board products, the deformation of suspended ceiling after construction in high temperature and rainy season is a headache for builders, or the wavy deformation after decoration for one or two years makes consumers very helpless. Plasterboard deformation, on the one hand, is due to poor construction environment, cross-construction, poor ventilation, inadequate storage of products on the construction site, irregular construction and other reasons; On the other hand, it is caused by the performance characteristics of gypsum board itself; First, ordinary gypsum board has a large porosity and is easy to absorb water, and the water absorption rate is above 50%. Secondly, the softening coefficient of ordinary gypsum board is low, only about 0.3.

In order to solve the problem of poor deformation resistance of ordinary gypsum board, Bayer Company specially introduced a Bayer anchor point deformation resistance board, which has the following characteristics:

1. No deformation: special additives and skeleton materials are added to the core, which improves the compactness of crystal structure and the connection strength between particles, reduces the porosity between gypsum hardened bodies, forms a hydrophobic film on the surface of voids, and improves the softening coefficient from 0.3 to above 0.8; At the same time, the absorption of water molecules by gypsum crystals is reduced, the water absorption rate is reduced, the water resistance is enhanced, and the water absorption rate of the board core is less than or equal to10%, thus solving the technical problem of gypsum board deformation after water absorption by putty scraping.

Second, the anchor point is a national patented technology, which can effectively prevent the seven fears of decoration and improve the quality of the project.

Third, white wood pulp; Using white wood pulp paper, the whiteness of the construction surface is increased from 35 degrees to 70 degrees, which is easy to cover and does not change color, and the decorative effect is more lasting.