The graphic method of the cutting process of various happy characters is as follows: 1. The most traditional paper-cutting steps and methods of double happiness characters: 40% paper-cutting, with the side that can be opened facing the right hand: 1, and the vertical lines are aligned to form vertical lines; 2, the two words "mouth" are aligned; 3. The transverse thickness is consistent.
Second, the cutting steps of the heart-shaped double happiness method: Remarks: 1, round-headed pen; 2. The horizontal lines are bent upwards, and the radians of all horizontal lines are the same and parallel to each other; 3. The two "mouths" are heart-shaped, the upper part is small and the lower part is large, which is relatively stable and keeps the inner and outer lines consistent. Third, the "smile" double happiness word cutting method: note: the upper "mouth" is slightly smaller than the lower "mouth", and the mouth is upturned, which is very happy.
Fourth, the cutting steps and methods of "big mouth" double happiness characters:
2. How to cut the wedding double happiness?
Editing of Double Happiness Characters I. Composition of Double Happiness and Double Happiness Pictures Double Happiness is to combine two happy characters, not add them together. The combination is actually a new fixed symbol.
Double happiness also has several "fonts", such as cursive, bold and simplified Chinese characters. The cursive script is to connect the horizontal lines of two happy characters and simplify the four points on the horizontal line below into two points.
The difference between the black body and the grass body is that the two points are changed into two vertical lines, while the surface simplification is to connect the vertical lines of the above two Chinese characters "Ji" with the word "Kou" to make it a whole connected by lines, which has a double sparse direction, a rectangle and a circle, as well as the double happiness characters "Xi Shang Jia" 1 and all composed of straight lines. 2. There are seven horizontal paintings and seven equidistant intervals. If each horizontal painting is designed to be as wide as each interval, then seven paintings plus seven intervals are * * * 14 equal parts.
But generally, the spacing between each horizontal painting is only a quarter to a half of that of the horizontal painting, so it is more convenient to add up the spacing between each horizontal painting and the horizontal painting as an equal part when cutting, that is, to calculate the vertical length according to seven equal parts. In this way, half the length is in the middle of the last word "mouth".
3. The longitudinal shape is symmetrical, that is, the transverse width can be divided into four equal parts. Because of the above three characteristics, it provides a strong premise for shearing, but it also brings difficulties.
The first difficulty is that the upper and lower halves are asymmetrical and cannot be divided into two. The second difficulty is that the central axis is symmetrical in pairs. For example, cutting it in half according to the central axis is convenient for pattern connection, but the "word" part is still a complete pair, and this symmetrical line is composed of straight lines. It is difficult to cut the manuscript without using tools such as a ruler. If the word is divided into four parts, it will bring difficulties to pattern connection, so it is easy to cut off the part between the word and the picture, and it is also easy to cut off the part between the word and the picture.
In order to solve these two problems, a group of people cut and carve according to the drawings after drawing them. This method can be said that anyone with a general paper-cutting foundation can start work, but it is more troublesome and time-consuming. It can be said that most artists use this method to carve double happiness pictures. Second, the cutting method of double happiness double happiness map (1) Double happiness cutting method without patterns around double happiness is very simple, which is much easier than cutting double happiness with patterns around it.
However, it is the basis of cutting double happiness pictures. Only with a thorough understanding of double happiness can we study and create a set of methods to cut double happiness pictures. Even if you learn the ready-made cutting method, you should first seriously learn the method of cutting double happiness. 1, the simplest way to cut it is to fold the paper for double happiness vertically twice.
Fold the paper folded into strips horizontally into three equal parts. Fold one at each end in half twice.
Fold the existing total length in half again. Cut two slits as shown.
2. Fold the paper vertically twice and cut it into strips in seven equal parts. Fold a centerline vertically again, and then open it.
Divide it into seven equal parts. Cut according to the pattern.
3. Fold the paper vertically twice into two strips, fold the paper folded into strips horizontally in three equal parts and then in two equal parts, and cut a cross between the two words, as shown in the figure; The other copy is folded in half twice, and the "cheese" on it is cut off according to the picture. 4. The cutting method of combining yin and yang, that is, the paper is vertically folded twice into strips, and the paper folded into strips is horizontally folded in three equal parts and then folded in two equal parts. According to the figure, cut out the top at a proper distance between the two "mouths" and the top of the cross, and fold the distance between them in half to cut out a gap.
5. The change and modification of the font itself (2) The cutting method with patterns around the double happiness picture 1. The double happiness picture has two vertical heads, both of which are on it. It is easier to connect with the pattern. Cut the word into two vertical sections and then cut it into seven equal parts. Leave enough paper on the vertical head and cut it into the shape of "flower cover". 2, cross-connected pattern scissors Shuangxi has three horizontal left and right extensions, which can be easily connected with patterns.
Fold Chinese characters in half vertically, and then divide them into seven equal parts vertically. On both sides of Chinese characters, there are paper surfaces connected with the convex cross, and patterns are cut out on the left paper to form patterns hanging left and right. When cutting, it can be determined to leave several connection points according to the situation. If the pattern is simple, you can connect a horizontal line; If the pattern is complicated, you can connect the upper horizontal and the lower horizontal. Generally speaking, there is no need to connect the middle and the horizontal.
3. Horizontal and vertical pattern cutting method Because there are three horizontal and two vertical patterns that can be connected with the pattern, except for the connection point below, the other three "characters" can be well connected with the pattern, so there is greater freedom in design. When cutting, leave cutting patterns on the top, left and right sides of the paper to form a "flower-covered top" pattern, with flowers on both sides, or cut flowers in all directions to form a flower shape.
4. Horizontal and vertical frame cutting method This method is basically the same as the horizontal and vertical pattern cutting method. Only the last one is connected by a pattern, and this one is connected by a frame, so it is very free to design any pattern outside or on the frame.
5. The pattern of "Double Happiness" was cut. The so-called "double happiness" pattern refers to the words below the pattern support word. There are two mouths under Double Happiness. If you want to connect with the pattern, you can choose the "lower left" and "lower right" corners respectively.
The method of cutting is: cut in two lengthwise, and then divide it into seven equal parts according to the lengthwise length. When cutting, be careful not to cut at the corner of the lower opening or at the top of the lower transverse end to avoid leaving paper-cut patterns. 6. Cut the square paper obliquely or obliquely for three times to make a right triangle; Cut a vertical line from the midpoint of the long side to the opposite corner top, and do not cut the part near the corner top; Leave a frame on the side opposite to the paper center outside the cutting opening, and then cut out the pattern outside the frame; Open the paper pattern and cut it in half.
Fold the rectangular part in the center of the paper in half and cut out the "double happiness" according to the method of seven equal vertical lengths. Pay attention to the joint between the four corners of the word and the border, and don't cut it. 7. Four-corner pattern cutting method The steps and methods of this cutting method are basically the same as the four-corner box cutting method of words.
Only in the third place, there are many differences, that is, the pattern is cut directly on the side opposite to the center of the paper outside the cut, leaving no border. 8. Cutting method of four corners and squares. The steps and methods of this cutting method are basically the same as those of the I-shaped frame, but the second part is slightly different, that is, when cutting the vertical line from the midpoint of the long side to the diagonal top, it is not cut from the vertical foot, but a distance is left behind.
3. How to cut the happy character?
The graphic method of the cutting process of various happy characters is as follows:
First, the most traditional double happiness word cutting steps:
Four-fold paper-cut, with the openable side facing the right hand.
Precautions:
1, vertical lines are aligned and basically form vertical lines;
2, the two words "mouth" are aligned;
3. The transverse thickness is consistent.
Second, the heart-shaped double happiness character cutting steps:
Precautions:
1, round-headed pen;
2. The horizontal lines are bent upwards, and the radians of all horizontal lines are the same and parallel to each other;
3. The two "mouths" are heart-shaped, the upper part is small and the lower part is large, which is relatively stable and keeps the inner and outer lines consistent.
Third, the "smile" double happiness word cutting steps:
Note: the top "mouth" is slightly smaller than the bottom, and the corners of the mouth are upturned, which makes you very happy.
Fourth, the "big mouth" double happiness character cutting steps:
4. How to cut the word "xi"
Method ①
& gt0 1
Take a rectangular piece of paper and fold it in half twice. Choose whether to fold horizontally or vertically according to the size you want. )
& gt02
Draw some lines like this according to the marks on the picture.
& gt03
Then cut off the excess parts with scissors according to these marks.
& gt04
Then spread it out and cut a square happy character. If you don't like this square word, please see the second paragraph.
Method ②
& gt0 1
Take a rectangular piece of paper and fold it in half twice.
& gt02
Draw some lines like this according to the marks on the picture.
& gt03
Then cut off the excess parts with scissors according to these marks.
& gt04
Then spread it out, and a happy word is written.
Matters needing attention
If you are not afraid of cutting, you don't need to mark it with a stroke first.
Please don't appear ugly happy words in the view, because I can't find red paper for the time being, so I'll do it. hahaha
5. How to cut happy characters Lanzhou Wedding Planning Company teaches you how to cut different happy characters.
Chinese weddings give people a festive feeling, so they are deeply loved by many newcomers.
The biggest feature of Chinese wedding is the big happy characters, so how to cut these happy characters? The following Lanzhou wedding planning company has brought different cutting methods of hi characters. Let's have a look. How to cut a happy word 1 To prepare tools, you only need a pair of scissors, a pencil and a piece of red paper. Advertising paper is used instead of red paper here.
2. Fold the paper in half in the middle, and then fold it in half. After folding, the area we see is a quarter of the whole paper. Draw a rectangle on the folded paper with a pencil, seven in all, five on the right and two on the left.
4. Take scissors to cut off the extra parts of the drawn rectangular paper. 5, half of them are happy words, all of them are complete double happiness, which are posted when they get married.
How to cut the four corners of the happy character? Cut the square paper diagonally or diagonally for three times to make a right triangle. 2. Cut a vertical line from the midpoint of the long side to the opposite corner top, leaving the part near the corner top uncut.
3. Leave a frame on the side opposite to the paper center outside the cut, and then cut the pattern outside the frame. 4. Open the paper with the cut pattern into a folded form.
5. Fold the rectangular part in the center of the paper in half, and cut the "double happiness" according to the method of dividing the longitudinal length into seven equal parts. Pay attention to the joint between the four corners of the word and the border, and don't cut it. How to cut it if you are happy? Double happiness method 1. Fold the paper (square or paper with a length-width ratio of 3:2) for double happiness cutting vertically on the reverse side twice.
2. Fold the paper folded into strips horizontally into three equal parts. 3. Fold a part of both ends (that is, one third of the total length) twice.
4. Fold the folded total length in half again. 5. Cut two mouths as shown in the figure.
The above are the cutting methods of different happy characters brought by Lanzhou wedding planning company. How much have you learned for prospective couples? .
6. How to cut happy characters
Double Happiness Word Cutter Skills Tools/Materials ● Paper ● Pen ● Scissors
First, the basic square characters
(1) Take a rectangular piece of paper and fold it in half twice. Choose whether to fold horizontally or vertically according to the size you want. )
(2) Draw such a line according to the marks on the map.
(3) Then cut off the redundant parts with scissors according to these painting marks.
(4) Then spread it out and cut a square happy character.
Second, the basic variants
(1) Take a rectangular piece of paper and fold it in half twice.
⑵ Pattern design.
(3) Then cut off the redundant parts with scissors according to these painting marks.
(4) Then unfold, and a happy word with a heart will be completed.
Thirdly, design reference for other complicated characters and patterns.
1, simple decorative pattern
2. Complex artistic patterns
I hope I can help you!