How to use pet packaging and embedding

PET packaging tape, also known as plastic steel tape (PET packaging tape, plastic steel packaging tape), is made of polyethylene terephthalate (PET) as the main raw material. PET packaging tape is the most popular new environmental protection packaging material in the world to replace steel tape, steel wire and PP packaging tape. Compared with ordinary packaging tape, PET packaging tape has the advantages of cost saving, convenient use, environmental protection and safety, and is loved by more and more customers, but many people often encounter some problems in use. Here, Chongqing Wanda Packaging reminds you of some simple packaging operation methods:

Tools/raw materials

pet packing belt

A plastic steel belt bundling machine

If you use a packer that needs packing buttons, you need to prepare several pet packing buttons; If a pneumatic buttonless baler is used, there is no need for a packing button.

Steps/methods

1

Binding: Tie the package with a binding tape, hold the overlapping part with your left hand, leave the tail about 300mm, and gently pull out the rest with your right hand. Baling belt: Hold the handle and tensioner with the right hand (ensure the maximum opening between the tensioner and the hanging teeth of the pressure plate), and insert the upper and lower parts of the packing belt into the baler at the same time. Note: The overlapping part of the packaging belt must be separated by the lower blade of the fixed cutter: loosen the tensioner (the tensioner holds the packaging belt tightly).

2

Tighten the strap: Press the switch of the tension switch lever (right side) with the thumb of the right hand until the strap is completely tightened.

three

Vibration and cutting: press the vibration switch lever (red) with the thumb of the right hand until the packaging tape is cut and welded. Note: Press and hold the vibration switch lever of the pneumatic baler until the vibration timer automatically stops.

four

Remove the packing belt: press the handle and tensioner with the right hand, and press the reversing switch with the little finger of the right hand until the packing belt is released from the tensioner. Tighten the handle and tensioner, and remove the tool from the packaging belt.

end

Matters needing attention

When using the pneumatic baler, be sure to pay attention to safety, and don't wear your hand through the belt of the baler when tying the belt.