What is the mystery of the lifting function of the tail bed of the new RV released by Benimar, Spain

Recently, Benimar, a Spanish RV manufacturer, released a 22 model C RV based on Ford Transit chassis. Tessoro? 44up, with a small forehead design in appearance; In terms of internal layout, it maximizes the use of space allocation; The lifting function of the rear transverse bed is a highlight of this car. What is the use of this design?

22? Benimar? Tessoro? 44up This car is made of the overseas version of Ford Transit V363 chassis, with a body size of 634×23×297(mm), a wheelbase of 33mm and a maximum bearing weight of 35kg;. The appearance still maintains the brand family-style design style, except for a few simple black flowers, and there is not much decoration, which is very simple. In terms of power, it is equipped with a 2.T diesel turbocharged engine matched with a 6-speed automatic transmission, with a maximum power of 13 HP. At the same time, it is also equipped with ABS+ESP, main and co-pilot airbags, cruise control, reversing radar, daytime running lights and other driving safety and auxiliary configurations.

There are 3m awnings, water and electricity interfaces and a large through storage compartment on both sides of the car body, and the top of the storage compartment corresponds to the rear transverse tailbed in the car; It can be seen that the bed board is designed with a row of skeletons, which is conducive to ventilation and dehumidification and increases the sleeping comfort of passengers. Battery, two levelers, 22V cable, water pipe, safety bag and WC cleaning solution are also attached with the vehicle.

The interior living area of the carriage is of European design style as a whole, and the layout is basically the same as that of domestic RVs. The new car adopts the layout structure of 4 seats and 4 bedrooms. The front and rear driving tables and chairs can be rotated, which forms a seating form with the rear seat sofa. The dining table rotates outward to expand the use area. After the table board is removed, this area can also be assembled into a 191×74(mm) sofa bed.

There is also an electric hammock with the size of 21×9(mm) at the top of the reception area. The oversized skylight in the front of the car meets the lighting inside the hammock, so you won't feel too depressed when sleeping in it.

a stainless steel sink with a cover and a three-eye cooker with a cover are integrated on the countertop of the integrated cabinet, next to which is a 14L super-large dual-zone refrigerator with a cold drink drawer below. In addition, the new car is equipped with a gas bottle, a 4W diesel heater, a gas-fired water boiler and a 14W solar panel.

The bathroom is designed with dry and wet separation, and the external area is equipped with a washstand, a toilet, a towel rack and a locker; Inside, there are shower heads and storage baskets with toiletries. In terms of waterway system, there are 12L clean water tank and 15L grey water tank.

The transverse bed at the tail is designed with adjustable height and special shape, with the size of 23× 131/19 (mm); This tailbed design is also a highlight of this car. By lifting the bed body, the space can be effectively maximized. When traveling at ordinary times, the bed can be lifted to increase the use space of the storage compartment at the bottom. When you need a rest at night, lower the bed to facilitate going to bed; It can also be adjusted according to users of different ages, which is very humanized.

This article comes from the author of Chejia, car home, and does not represent car home's standpoint.