Factory goods A refer to the products produced by genuine manufacturers. The specific situation is that after the manufacturer produces genuine products for the authorized company, due to the overcapacity of its production line, it will privately produce a batch of redundant products under the supervision of the unauthorized company. The biggest advantage of this product is that it is produced by regular manufacturers and can guarantee the quality of goods. Because the manufacturer itself is engaged in genuine manufacturing, it has a certain ability to master the key production technology of shoes, and now the domestic raw materials are abundant, so there is basically no difference between the shoes produced and the genuine ones. However, it should be noted that the production of genuine products requires strict quality supervision and inspection, and manufacturers do not need to go through any strict quality inspection when they follow orders privately. There may be a phenomenon that the workmanship of non-key parts is slightly rougher than that of genuine products, but it does not affect the quality of the products themselves. The biggest advantage of this product is that the quality is almost the same as the genuine product, and the appearance is exactly the same as the genuine product. However, because it flows out through informal channels and does not bear all kinds of expenses that genuine products should bear, the price is quite different from that of genuine products. If you need a pair of high-quality sports shoes and are unwilling to bear the high price of genuine products, then this product is undoubtedly your best choice!
Please note: because there are so many online sellers now, and many people advertise that their products are original A goods, in fact, this is simply impossible. Because the real original documentary is still limited after all, it is impossible to get this kind of goods without long-term good cooperation. Therefore, buyers and friends should pay attention to the seller's long-term reputation and integrity when buying goods, not just the price.
References:
ppxie.c
What do you mean original goods? What's the difference between it and the genuine product?
The original factory is the production without adding a series of trademarks, industrial and commercial procedures and genuine products.
What do you mean by factory goods? Say it briefly.
1. What is a company product (authentic)?
That is, counter goods, shoes bought in exclusive stores authorized by regular (such as Nike) companies, whether direct stores or franchise stores, must be officially authorized by the company. More strictly speaking, things bought in the store with receipts and invoices (taxes) can only be called "company goods". The company's source of goods is "original goods", which are stamped, labeled and sold in specialty stores. In any case, shoes that are not sold publicly do not exist at all (not because they are not made or of poor quality, but because they have not been sold by the company, how can they be called company goods? )。
2. Factory goods
Factory goods are divided into original goods and non-original goods. The original goods are shoes contracted by regular companies, and they flow out in the following ways: 1. Shoes stolen on the assembly line. There are no insoles and shoe buckles. These things were stolen because some accessories on the assembly line were incomplete. Generally, there are barefoot shoes, shoe buckles without insoles, shoe boxes and shoe supports, and shoes may not be painted with glue and qualified stamps.
2. Shoes stolen after the finished products are produced by the factory.
This kind of shoes are exactly the same as those made by the company (note that they are just shoes), including all the details and rubber drawings. Because it is ready to enter the store. There is nothing wrong with this pair of shoes, which are usually taken away by the company. So this is why many people can get so many "company goods" but the shoe box is "gone".
3. Shoes stolen during the delivery from the factory to the specialty store.
The quality is the same as that of the counter.
Original goods are getting harder and harder to get, and it is rarely like looking for a needle in a haystack. If you have been to the foundry, you will find that there is no dead angle monitoring in 360 degrees, and no one can start. Therefore, it is an indisputable fact that we are friends of original goods, most of which are just good goods made by big factories, and the quality of the goods is the same as that of the company.
Non-original goods are commonly known as cut pieces. What is cutting?
The first step is usually to take a pair of original shoes, remove them, study the shoes and analyze the materials of each part, just to see which layer of leather, what material and what thickness it is. The second step is to find these material factories and how many pairs of orders are needed. The shoes made by the company are also placed in these factories, and the glue of the materials is the same as that of the company. The third step, the materials are ready, and then the shoes are shaped. Mold opening is necessary. The cost of mold opening is very high, but some factories sell hundreds of thousands of pairs a year, which is not worthy of attention. Just take a magnifying glass in your hand and make a comparison to see the difference of goods.
What do you mean factory goods! Is it purchased directly from the factory?
The definition of factory goods is also called "foreign trade products" or "products exported to the domestic market", which are products produced and sold abroad but unsalable. These products in stock should be destroyed, but some enterprises just put them into warehouses. In the market, there is an active group of people called "receiving inventory", who are responsible for purchasing these warehousing products directly from manufacturers. Although it is a factory product, it is theoretically a "genuine product with lost copyright". The characteristics of factory goods are that the workmanship is much finer than imitation goods, and the materials used are completely authentic. But because the supply of factory goods is relatively small, many factory goods on the market are actually imitations. Generally speaking, only a few experienced equipment players in China have channels, so the factory goods are good, but they need to be cautious when buying. Let's make an intuitive analogy. Workers in a food factory put sausages just produced from the assembly line in their pockets, took them out of the factory and sold them to small shops. This kind of sausage is a "factory product", that is, shoes without shoe boxes that we usually see online or in private shoe stores, and the price is much lower than the original price. Other sausages coming down from the production line, after quality inspection and packaging, finally appeared in the supermarket. This kind of sausage is a "monopoly product", that is, shoes sold in regular specialty stores. And some of them are exported to foreign countries, and the shoes sold by foreign specialty stores flow back to China through other channels. This kind of sausage is called "foreign monopoly goods", and this kind of shoes is no different from domestic monopoly shoes. Many so-called "cabbages" on the Internet are bought at low prices from foreign specialty stores and then sold at high prices. In addition, there is a special kind of "factory goods". If a worker takes out the mixed meat stuffing and casing at the same time and then processes it in a small workshop, this sausage is what we used to call "assembled goods". This kind of shoes are genuine from the midsole to the upper, but the subsequent stitching is really done in private. Because of the difference between workers' skills and glue, or because the assembled accessories are incomplete, such as high-tech accessories such as air cushions, the quality of these shoes is often not guaranteed. For example, there are a large number of low-priced Air Max 90, Asics K series and so on. The so-called factory goods introduced in this paragraph is a new concept that has only appeared in recent years. Here, I want to introduce a common sense to you first, which will help you to know more about the factory goods. As we all know, China is a populous country, which is destined to produce a large number of cheap labor, which is suitable for industrial development. In this way, many large foreign companies will set up factories in China, or hand over some orders to competent factories in China for production. Most of them are in coastal areas, which involves a water transport problem. Because water transportation is the cheapest long-distance transportation mode at present, locating the stations in coastal areas can further reduce the cost, which is also the reason why these stations are mostly in coastal cities. Take China as an example. These factories are located in Vietnam, Indonesia and some small countries in South America, so I won't introduce them much. Because the products produced by these factories are of high value, the workers and some executives in the factories will try their best to sell their products outside and create profits for themselves. At first, the workers just sold some inspected defective products. Although these defective products are unqualified, because the requirements of foreign orders are very strict, sometimes just because of a thread, a broken line will be regarded as a defective product. Of course, there will be products with real quality problems, but because of strict working procedures and high quality of products, these products with real problems are rare and can be said to be ignored. It is no problem to wear such things, and the relatively low price is very marketable, so gradually the worker will take this as his first occupation, because the profit will be much higher than his income in the factory. However, in the past two years, after all, the number of such products is limited, which has gradually failed to meet the demand. The factory executives are also aware of the profits that these products can bring to them, so some QC will mark qualified products as unqualified, so as to bring them out more conveniently and bring them more profits. This is the source of goods in the factory. Edit the characteristics of factory goods in this section. The difference between factory goods and company goods has become smaller and smaller, and even the quality of some factory goods is better than company goods. Seeing this, some people may question. Please continue to listen to my explanation. Among these products listed as unqualified by QC, the quality of unqualified products can not meet the requirements, but for the reasons I mentioned above, this is true ......
The difference between original goods, foreign trade surplus goods and genuine goods
Original bill (genuine): A product that completely meets the requirements of foreign investors, passes all production procedures, all process tests, all garment washing and garment testing procedures, and has no defects, and can be delivered to customers and fulfill the contract is called genuine (generally, 65,438+0% of the products in genuine products have slight defects). The standard genuine products are generally well packaged, with perfect workmanship and no defects. Such as TK-0037. Manufacturers are often called first-class products. Except for the counter, the products bought by other channels are not genuine!
Follow-up order: the part that continues to be produced according to the original style, fabric and process standards at the request of foreign businessmen (maybe not the original brand, or some ethnic merchants).
Tail bill: the part that is left over or detained due to overproduction (exceeding the quantity required by customers) or customs reasons, and the part with slight defects in the production process.
Defective products: products that have gone through all production procedures and passed all inspection procedures, but have slight defects in the process of washing clothes, incomplete trademark tags, slight damage when installing tags and magnetic buckles, or fail to pass the inspection procedures for other reasons, are called defective products. Defective products are the main part of domestic foreign trade, accounting for more than 90% of domestic foreign trade products, such as TK-0088.
Scrap: The parts that fail to pass the corresponding process inspection in the garment production process are called process wastes, which are generally represented as pieces and pieces. In the process of garment production, the part that completely passes the inspection of the corresponding process, but is seriously damaged in the final process such as garment washing, and obviously damaged when installing the tag and magnetic buckle, is called garment scrap.
Imitation bill: the part that domestic manufacturers continue to produce by using the original raw materials and styles, but there is no trademark authorization. Because some manufacturers often use their existing brands and trademarks for the convenience of listing and selling, it is sometimes called the title version. Such as TQ-0009
Counterfeit goods: counterfeit and shoddy products produced by other manufacturers.
Don't believe it-Nike's super-* * version shoes are only over 300,400 yuan, and they are genuine-except for specialty stores, 99% of them are fake, and the so-called imitations are also very similar. What is the * * * version? This is complete nonsense.
What is "original factory production"?
Forget the original factory. OEM refers to transferring the original technology to another factory, so that another factory can plant the original goods with the original brand (of course, it also means that the original factory can save labor, make less profits, and the OEM price is cheaper than the original factory. After all, it's not made in the original factory. Of course, there are also examples where the OEM quality exceeds that of the original factory: SanDisk's memory chips are better than those of the original factory in Bisogni, but the price is cheaper. In addition, kindly remind that IPOD is only produced by Apple, but many low-priced OEs.
Solve, what is factory goods in the end, and how to distinguish factory goods from genuine goods.
Factory goods are fakes.
Those who sell factory goods all say that they are "A-class" goods that flow out of the market through unofficial channels at the foundry. Grade A goods entering the market through policy channels are genuine, just like counter stores.
Although it may not be surprising that A-class goods enter the market through abnormal channels, the goods sold by the factory are indeed available at any time. Do you think it's possible? Even if I think about it a little, I think it is impossible to flow out of the market like this.
There are also some factories that say it is OEM (original equipment manufacturing) and that it is made according to genuine technology. I don't know if those patented technologies are so easy to imitate, but I think even if shoes with similar performance can be made according to genuine products, the cost can't be so low and it can't be sold so cheaply.
So the factory goods are still not credible.
Is there a difference between the original goods and the genuine goods on the online shopping?
This is usually not true, is it?
What's the difference between genuine and original products?
It makes no difference. Maybe one has a label, one doesn't, one is expensive and one is cheap.
Original goods! Is it true? 20 points
It is better to say that fakes are more accurate and fake.