The installation steps of Hans Geyer shower are divided into three steps to teach you the installation method.

Now, if everyone lives in the same building, there will be a bathroom at home. When the bathroom is renovated, there will be some jade things, such as bathtubs, water heaters and shower equipment. These are all needed in the bathroom, but I often come back from work outside and just want to take a good bath in the bathroom. So choosing good materials and shower equipment is the key. There are many shower facilities on the market now, which are dazzling. For example, Hans Goya shower is very famous, and then Bian Xiao will introduce it to you.

What are the installation steps of Hansgrohe shower? Three steps to teach you how to install.

1, pay attention to the height of the mixing valve. The height of the sprinkler mixing valve from the ground, when we install the sprinkler, the first thing to determine is the height of the sprinkler mixing valve from the ground. Generally, before installing the shower head, we have determined the installation position of the shower head.

Then the distance between the sprinkler mixing valve and the ground is generally controlled within the height range of 90~ 100cm. In this range, we can also make fine adjustments according to our height. But generally it should not be higher than 1 10cm. If it is too high, the lifting pipe of the shower head may not be installed.

2. Keep the thread. Generally, the reserved thread of the installed shower faucet is just buried in the wall brick. It is best to cover it with a decorative cover. Otherwise, it won't look good.

Therefore, it is best to reserve a position when laying the pipeline, which is generally 15mm higher than the blank wall, so that the thread can be buried when sticking ceramic tiles to ensure the beautiful wall surface.

3. The space reserved for the electric wire elbow inside the shower head. Generally, the reserved space of the elbow in the shower is about 10~ 15cm. Generally, when buying a shower head, the seller will give away two adapters, so that the water inlet of the mixing valve can be well connected to the cold and hot water outlet of the wall. But try not to use the adapter to turn, which is more beautiful.

Hans Gayle Shower-Precautions for Installing Hans Gayle Shower

1. When installing the shower, you need to punch holes. Be careful not to hit the water pipe on the wall when punching holes.

2. When installing the round bottom cover of the shower head, be sure to tighten the screws, otherwise the shower head will fall off.

3. When installing the hand-held shower, you can't grab it or twist it.

4. Before installing the shower, be sure to determine the installation height and mark it.

Bian Xiao will tell you about Hans Geyer's shower. I'm sure you'll know that Hans Gayer took a shower after reading it. In fact, there are bathrooms and many bathing facilities at home. For example, some families will use bathtubs, while others will install shower facilities. However, bathing takes up less space, so it is very popular with people. Now most families are equipped with shower equipment. Hans Geyalin is a famous brand. If you need to buy, you can consider this brand of shower head.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~