1. The installation accuracy of the spindle and tool magazine is not enough, resulting in a large deviation between the center line of the tool handle and the center line of the shaft taper hole, which leads to a large collision force during tool changing and a loud tool changing sound. This situation usually cannot be solved by itself, and it needs to be re-debugged by factory professionals. 2. The tool changing point is not set correctly. This situation is less serious than the previous one. The main reason for this situation is the parameter setting of the machine tool. However, due to the lack of relevant experience and knowledge of the users themselves, we still suggest inviting relevant professionals to come to the site for debugging. 3. The displacement speed of tool changing in the tool magazine is set too fast. This situation is caused by the rapid downward movement of the spindle during tool changing, and a large impact force is generated due to the rapid acceleration, which leads to a large noise. This situation can be negotiated with the technical personnel of the manufacturer by telephone.
Taiwan Province Shengjie CNC tool magazine (SENJET), Taiwan Province Shengjie tool magazine is a rising star in Taiwan Province tool magazine industry. At present, after nearly ten years' efforts, it has made remarkable achievements in hat tool magazine, disc tool magazine, umbrella tool magazine, in-line tool magazine, turning and milling compound tool magazine, chain tool magazine and vertical and horizontal compound tool magazine, and has its own place in Chinese mainland, and even in Japan and South Korea. Shengjie innovatively introduced the variable frequency tool magazine. This innovative measure effectively prevented the motor brake coil from burning due to long-term work, and at the same time, the tool changing time was increased to 1.8S It shared the support and system with the ordinary disc tool magazine and selected the tool magazine for machine tools.