How to spray enamel paint

Painting method of enamel paint: Generally, the distance between the nozzle and the painted surface should be about 30cm. Nozzle and base should be vertical. The moving direction of the spray gun is parallel to the base layer, and it cannot move in an arc shape, otherwise the sprayed coating will be thick in the middle and thin on both sides. When operating, move the spray gun first, and then pull the trigger. Until the trigger is released, the spray gun will not stop moving to avoid the thickness of each row of coating. Cover the doors and windows before painting. In order to reduce spray escape, the spray angle can be sprayed vertically from top to bottom at the end, and then sprayed horizontally. When spraying the inner corner, don't spray directly at the corner, which will make the coating on the deep sides of the corner too thin and the coating on the outer side of the corner too thick. It should be sprayed vertically from top to bottom on both sides of the corner, and then sprayed horizontally. When spraying vertically, the nozzle should be far away from the top of the corner, so that the spray can just blend at the top of the corner and will not fall. When spraying the ceiling, stand back as far as possible to prevent the paint from falling on your body; The inclination of the spray gun should not be too large, so as not to affect the discharge. If the nozzle is blocked in use, it should be dredged with a bamboo stick, and hard steel wire or nails should not be used to avoid damaging the nozzle shape, reducing its accuracy and affecting the spraying effect. Wash the spray gun with water or thinner immediately after use.