Cleaning method of filter tip cigarette holder 1. External cleaning:
Wipe gently with soft cotton cloth, especially the bitten part of Khyron cigarette holder. Because you often hold it in your mouth, you must pay attention to hygiene. It is recommended to scald it with boiling water before use, and then wipe off the water droplets with a paper towel or spin it dry.
Two. Internal cleaning:
1, if it is a core-changing cigarette holder, the internal cleaning is very simple, because the filter element is used for filtering, and there is only a small amount of tar that may leak due to loose installation on the inner wall of the cigarette holder, so it can be wiped with a paper towel or cloth.
2. Cleaning the cigarette holder is mainly aimed at cleaning the cigarette holder, because this kind of cigarette holder can be cleaned and used repeatedly, and the cleaning link plays a very key role in the use and filtering effect:
Users are advised to simply wipe and clean up after using up half a pack of cigarettes. Generally, it needs to be cleaned when it feels tight during use. When cleaning, it should be pulled out in stages, especially the cigarette holder of any style should be pulled out spirally, which has a great influence on the sealing effect of the cigarette holder. Wipe it in sections after pulling it out, and clean the filter hole with a penetrating needle;
If it is not cleaned for a long time, it is difficult to clean the tar in the residual cigarette mouth. After being pulled out in sections, it is soaked in warm water at about 50℃. Soak for about 10 minute, and then wipe. You can also soak it in a little detergent. This method of washing with water must be used after the water is naturally dried, otherwise the smell of cigarette oil will affect the mood of use. For high-grade cigarette holders that need special protection, alcohol or brandy is generally used to wipe them clean, but the alcohol component will be wiped off immediately after cleaning.
The filtering principle of filter tip cigarette holder is 1. Physical barrier filtration: that is, the circulating level of flue gas is increased through environmental protection cotton, so that tar and solid substances in flue gas are attached to the filter cotton, and the filtration effect is enhanced.
2. Air specific flow filtration: control the air flow rate to reduce the tar content, and the air will speed up when passing through the micropores. However, there is a cavity in the middle of the cigarette holder, where the smoke will slow down and the outlet is microporous. Smoke will stay in the cavity for a short time, and tar will adhere to the filter element. The smoke in the smoke will also fall into the cavity during the deceleration process, forming a mixture with the smoke tar, so that a large number of harmful substances are trapped in the cavity.
3. Magnet filtration: The magnetic field of the magnet will make the smoke flow in the direction of the magnetic field when passing by, and the magnet itself is cold, which is the effect of tar and smoke interception.
4. At present, there are other chemical particles that can achieve the filtering effect.
The important function of cigarette holder A is to filter harmful substances and greatly reduce the harm of cigarettes to human body, which is the most important function;
B: avoid yellow fingers,
C: reduce the irritation of smoke to eyes;
D: Show fashion, taste and distinctive personality.
Classification of cigarette holders A: Discarded cigarette holders
Convenience: Generally, each cigarette holder can filter 7- 15 cigarettes, and throw them away after use without cleaning, which is very convenient.
Low price: a few cents, the cost of filtering a cigarette is generally a few cents, and the effect is moderate:
Appearance features: compact appearance;
Applicable people: people who are more casual about the image and pursue practicality and convenience.
Here are some common disposable cigarette holders.
1. Cheap and delicious disposable cigarette holder, pure physical filtration.
2. Discarded cigarette holders are combined with physical chemistry.
3. Disposable cigarette holders for household use
4. Patented porous ceramic coke filter disposable cigarette holder
B: filter holder
Convenient: the maintenance can be completed by replacing the filter element in the cigarette holder, which is very convenient and easy;
Cost of use: This kind of cigarette holder is the highest. In addition to buying cigarette holders for the first time, you need to buy consumable filter elements in the future, otherwise you can't use them. According to the calculation of domestic common filter element per box 10 yuan/18, this filter element can usually filter 7- 15 cigarettes, and the filtering cost of each cigarette is between 3 and 8 cents, and the daily cost is about one yuan.
Appearance characteristics: different manufacturers have different raw materials and process styles, so there is a lot of choice.
Applicable people: users who pursue fashion and convenience.
C: circulating filter cigarette holder
The so-called circular filtration is the process of using flue gas to circulate through several tiny metal holes and stay in the cigarette holder, which can also be understood as recycling after cleaning.
Convenient: inconvenient. In order to maintain a good effect, it is suggested that about 20 cigarettes be used to remove tobacco oil.
Cost of use: lowest! Because there are no consumables, rubber sealing rings that are relatively easy to break can be used for a long time as long as you are careful when cleaning them, and there are usually spare gifts when you buy them.
Appearance characteristics: different manufacturers have different raw materials and process styles, so there is a lot of choice.