How to deal with water accumulation due to heavy rains in the glass sunroom:
If the slope of the glass sunroom is not enough, heavy rains and water accumulation can be done by raising the slope of the roof of the sunroom and doing drainage dredging work. However, it is best to keep the inclination of the slope between 18 and 45 degrees. If the inclination is too large or too small, it is more likely to cause safety hazards.
The rainwater on the top surface will be quickly removed according to the situation, so as to minimize the possibility of leakage.
Sun house roof drainage and waterproofing
In many cases, roof leakage is directly related to the lack of efficient and reasonable roof water conduction methods; at the same time, the appearance of many buildings However, the effect was affected by the arrangement of the water diversion system. In order to drain the accumulated water on the roof as quickly as possible without affecting the beauty of the building, adopting a high-quality roof water diversion solution is the most ideal solution.
Water panels, gutters, and Owens Corning downwater systems*** together constitute Xinhuarui’s roof drainage solution. Gutters can be bent and simply shaped at will, with excellent applicability. The unique design of Owens Corning's downwater system solves a series of common problems with roof downwater systems.
The sunroom is basically sealed when designed. The waterproofing and drainage of the sunroom are formed by structural processing of glass and rods. The quality of the waterproofing performance is closely related to the quality of the structural organization. .
In summary, there are two methods:
1. "Guide" means to use the slope of the sunroom to quickly drain the rainwater on the top surface according to the situation and minimize the possibility of penetration. .
2. "Blocking" means using waterproof materials to block the gap between the glass and the rod, which must be seamless and non-porous.