The shower head bracket can play a role in fixing the shower head. Sometimes when taking a shower, you don’t want to hold the shower head to rinse. At this time, the shower head bracket comes into play. So don't look at this small shower holder, its role cannot be underestimated. So, what are the categories of shower head brackets? Next, we will bring you a relevant introduction to shower head brackets, let’s learn about them together.
1. Classification of shower head brackets
1. Portable shower brackets: Portable shower brackets are relatively common. When people take a bath, they can take a bath with their hands, take a bath at will, and enjoy a comfortable bath. Portable shower stands can be used as stationary showers.
2. Overhead shower bracket: The overhead shower is also called a large shower. The overhead shower bracket can be installed on the wall. This shower bracket can adjust the shower angle of the shower room, and the up and down movement angle is very flexible. .
3. Lifting shower bracket: This shower bracket can increase the height of the shower, and can also be adjusted to the most suitable shower height according to the user's height to enjoy a comfortable bath.
2. How to install the shower head bracket
1. The shower bracket should be installed first. The height of the shower bracket can be installed according to the height of the home.
2. You can first put the decorative cup into the thread of the shower bracket, wrap the raw tape, and then screw the left and right shower brackets into the joints of the hot and cold water pipes.
3. Adjust the distance between the left and right shower brackets. The height must be the same and the distance from the wall should be the same.
4. Put the water-stop washer into the water inlet hole at the back of the faucet, and then install the shower faucet on the shower bracket.
5. Finally install the faucet, shower pipe and shower head. You can go to the small commodity wholesale market to find it, specializing in the sale of household items. They have products specifically sold on ceramic tiles, which can be used to put the shower installation.
3. Precautions for the shower head bracket
1. Pay attention to the height of the mixing valve from the ground: the shower is to reserve the internal steel wire elbow to prepare for the next step of the mixing valve. The height is generally between 90-110cm. The middle height can be determined according to the owner's requirements or the average height of the couple. However, it should be noted that the height cannot be higher than 110cm, otherwise the lift will not be installed. It cannot be lower than 90cm, otherwise The valve won't bend every time. This is good.
2. Notes on the spacing between the two inner cable nozzles: Experienced plumbers know that the standard spacing between shower cable elbows is 15cm, the error is not greater than 5mm, and the surface is 10cm. Remember to measure in the middle. If it is too wide or too narrow, it will not fit. Don't rely on adjusting the wires. The adjustment range of the line adjustment is very limited.
3. After attaching the wall tiles and keeping the wall flat:. Leave the thread ends to account for the thickness of the wall tiles. It is best to make the hair wall 15 mm high. If it's level with a blank wall, etc., you'll find that the wire ends on the wall are too deep for a shower.
IV. Tips for purchasing shower heads
1. Take a look at the spool
When we buy this product, we must first pay attention to whether the quality of the spool is good or not. bad. Generally speaking, high-quality valve cores made of high-hardness ceramics are smooth, wear-resistant, and feel good. A qualified valve core can be switched 500,000 times; if it is a poor quality valve core, it cannot achieve this strength and may leak during use. The quality of the valve core will directly affect the use and service life of the shower head, so be sure to check its quality when purchasing.
2. Look at the surface coating
Most owners will pay attention to its appearance when purchasing, so we must consider the quality of its coating when purchasing. Generally speaking, the quality of the surface coating not only affects its appearance, but also directly affects the quality and service life of the shower, as well as general hygiene and cleaning. Therefore, when purchasing, you should check whether the surface coating is black and bright, and whether there are oxidation spots or burn marks.
The above is the relevant introduction about the shower head bracket that we bring to you.