In daily life, the most feared thing about mobile phones is that they are out of power. Especially when driving, I often use mobile navigation, which really consumes a lot of power. The old car uses an ordinary mobile phone holder, and then a charging cable supplies power to the mobile phone, so it is relatively troublesome to plug in and charge every time you get on the bus. So with the help of my friend Amway, I started the wireless charging bracket, MOMAX MOMIS car wireless charger mobile phone bracket.
In fact, for the car-mounted wireless charging bracket, the biggest demand is wireless charging, so that you don't have to bother plugging and unplugging the charging cable every time, and you have a suitable place to put it when driving and navigating. However, the mobile phone holder of Momis car wireless charger seems to have more functions.
Look at the packaging first. Actually, it's all in English. According to the introduction, this charging stand can charge mobile phones including iPhone 8, iPhone11iPhone12. , as well as mobile phones such as Xiaomi and Huawei that support wireless charging. Moreover, the power of wireless charging can reach 15W, which is slightly smaller than many wired fast charging, but charging is still sufficient.
You can see a Chinese nameplate on the back of the package, which is made of ABS aluminum alloy, and then some brand information. In addition, you can also see certification marks such as FCCE, which makes users feel more at ease when using certification.
At present, there are many configurations of this Momis car wireless charger mobile phone bracket, mainly because of different accessories, such as air outlet bracket, sucker bracket, QC3.0 car charger and so on. I chose the configuration of car charger, air outlet bracket, Type-C charging cable and wireless charging bracket. /kloc-the price in the early 0/00 yuan is far cheaper than I expected.
Although all new cars will be designed with USB interface now, with the increase of in-vehicle equipment, the more USB charging interfaces, the better. The attached QC3.0 car charger is designed with dual USB ports, which supports QC3.0 fast charging and 2.4A charging. It can charge two devices at the same time without occupying too many ports of the original car. What kind of driving recorder, empty car network and so on. Can be used.
Because there is a big screen in the middle of my car, I chose the bracket of the air outlet, which is not complicated according to the combination. It can be directly attached to the air outlet after being connected and fixed with the automobile charging seat. Moreover, the bracket can be rotated by loosening the knob at the back, which is very convenient for horizontal and vertical use. In addition, the metal contacts on both sides of the charging bracket are actually quick-release induction keys. When touched lightly, the bracket will automatically loosen, and the mobile phone will be put on, which has gravity induction and will automatically bite, which is very scientific and technological.
Install it to the air outlet and clamp it directly with the air outlet bracket. Very convenient, this position is just right. Not only will it not block the big screen in the middle, but you can also watch the mobile phone screen while driving.
This weight sensing design is still very sensitive, and I always feel that I can play for half a day. When your finger touches the bottom, it will automatically bite, and it can adapt to different sizes of mobile phones. Don't worry that the mobile phone is too big or too small, and the size is not appropriate.
After the vehicle starts, put the mobile phone on the wireless charging bracket, jam it directly and charge it directly.
If you need to take it out, your finger touches one of the metal contacts on both sides, and the stuck bracket will automatically loosen, so you can easily take out the phone. In addition, many similar stents now have a problem. If the car is turned off early, the charger will not be energized. It's embarrassing that the mobile phone can't be disassembled at this time. A delay capacitor is designed for the mobile phone bracket of Momis car wireless charger. Even after the vehicle is turned off, the mobile phone can be removed by tapping the bracket within a certain period of time. This design can be said to be very humanized.
It has been used for some time now, and it has been driving for about two hours. The mobile navigation used (the navigation map of the original car was not updated in time, so it could not be upgraded online, so I had to vomit here), and no heating of the charging seat was found. The power consumption is basically the same when charging.
Summary: For wired fast charging, it really feels much slower than wireless charging. But if you are in mobile navigation or listening to audio, the wireless charging of 15W can basically guarantee the power consumption. In addition, I am more optimistic about this charging bracket, that is, it is equipped with a dual-port vehicle-mounted charging head, which can not only supply power to the wireless charging bracket, but also supply power to one more device, thus solving the problems of many vehicle-mounted devices and insufficient charging ports. Of course, the gravity sensing design is also fluid when used, which is very "high-tech". The flameout is also a very humanized design, which really solves the pain points in use. Therefore, the price of this model is only in the early stage of 100 yuan, and the cost performance is still very high.
Million car purchase subsidy