Unconsciously, autumn has arrived, and I am ready to start wearing long sleeves. But suddenly I found that many coats felt a little wrinkled and needed to be ironed with an electric iron. Recently, I started a Phillips nano steam iron, and the experience is quite good. Share it with everyone.
About fellers:
Feilesi is a product brand founded by Tianwu New Materials with Flexwarm and a variety of core patented technologies, focusing on the research and application of precise temperature control technology, and is the world's leading intelligent heating expert. FLEXWARM consists of two English words? FLEX？ And then what? Warm? , among them? FLEX？ Contain? Flexible? (Soft) And then what? Flexibility (flexible) two meanings; ? Warm? (Warm) represents the comfortable temperature brought by FLEXWARM precise temperature control technology. At present, Feilesi products mainly include nano-steam series, precise temperature control household appliances series, intelligent constant-temperature clothing series, sports health care protective gear series, intelligent heating scarf series and so on. This Feilesi nano steam iron belongs to nano steam series.
The principle of electric iron:
The causes of clothes wrinkling are residual stress, compressive stress on the inner side of curved surface and tensile stress on the outer side. The reason of residual stress is that the cloth is deformed under the action of external force and cannot relax and recover automatically after being tightened.
After the electric iron is electrified, the heater in the iron core heats and vaporizes the water at room temperature into high-temperature steam (generally above 98℃) and high-pressure water, and the hot steam is released through the steam conduit and nozzle, and the steam comes out from the hole of the contact surface to wet the cloth, which can effectively relieve the irregular tension of the cloth, eliminate the original stress residue, and make the cloth relax again or tighten in a certain direction regularly. Therefore, the electric iron can flatten the fabric and iron out flat shirts and trousers.
At present, there are three kinds of electric irons on the market: ordinary electric irons, temperature-regulating electric irons and steam electric irons. Among them, the common electric iron is simple in structure and low in price, and mainly consists of a soleplate, an electric heating element, a pressing plate, a cover, a handle and other parts. Because it can't adjust the temperature, it has been gradually eliminated. Temperature-regulating electric iron is more convenient because it adds a temperature-regulating switch on the basis of ordinary electric iron, and the temperature range is generally between 60℃ and 250℃. The steam electric iron adds a steam generator and a steam controller on the basis of the temperature-regulating electric iron. It has the dual functions of temperature adjustment and steam injection, without manual water spraying.
In recent years, in addition to these three kinds of electric irons, other types of electric irons have been developed. For example, mini electric iron (also called small iron, DIY iron) is a delicate and compact iron for personal DIY, travel and ironing. PTC heating elements are usually used, the size is less than 12 cm, and the weight is less than 0.5 kg, which is small and exquisite and easy to carry.
This Ferris nano steam iron is a typical mini iron. Its size is11.8 * 8.1* 9.7 cm, and its weight is only 480 grams.
Unpacking:
▲ The box is dominated by red background, which is easy to be associated with? Hot and warm? Equality.
▲ Open the box to see the beauty of Feilesi nano steam iron. This color scheme is white and elegant. The iron body is fixed and protected by the base and the transparent cover through the lock, and the top of the cover has a brown leather handle. You can see that there is a small gap under the base for plugging in the power cord. These two details are very sweet.
▲ Looking at the other side, both the iron fuselage and the base are marked with FLEXWARM, a brand name from softness and warmth.
▲ Remove the cover and base. Then look at the iron body. The bottom of the back is marked with product precautions. There is a water level observation window in the middle, and the water injection port and cover are on it.
▲ There are five small holes at the bottom of the iron for the nano steam generated by the iron to be sprayed out, which is why it does not need manual water spraying.
▲ The power cord is exquisite and the braided wire is strong. Because the power cord is 2 meters long, it has a cable management belt, which can be stored in the base.
▲ The capacity of the water cup is 65ml, and the placed base can just accommodate the power cord in the storage state.
▲ A cloth bag is attached at random, which can just hold an iron, so it is convenient to take it with you when you travel.
▲ The explanation is quite detailed.
Ok, after unpacking, let's actually use it and see if it works!
Actual experience:
Basic control:
▲ Turn on the power first and hear a voice? Descending? And turn on the signal lights, and then the signal lights of the four gears will flash and jump in turn.
▲ At this time, just touch the power button to switch gears. From left to right, there are high-temperature steam gear (fourth gear), low-temperature steam gear (third gear), dry ironing (second gear) and dry ironing (first gear).
▲ Remember to open the lid of the water tank before using steam ironing, and inject clean water with the attached water cup. Remember, the water level should not exceed the maximum water level.
Gear position:
The function positioning of the four gears is different:
The first working temperature is 125℃, which is mild and dry, suitable for rayon, silk and rayon. The working temperature of the second gear is 150℃, which is suitable for wool, cashmere and synthetic fiber. Third gear working temperature 175℃, suitable for cotton-padded jacket, etc. The working temperature of the fourth gear is 200℃, which is suitable for linen and other materials. Measured value:
Let's take shirt neckline, trousers and flocking fabric folds as examples to see its actual performance!
1, light absorption cloth
I have a light-absorbing cloth to shoot the background, and I haven't taken it out for a long time because there are creases on the back. Try ironing this time to see the effect.
▲ State before ironing.
▲ Iron preparation.
▲ ironing. It is worth mentioning that as long as the hand leaves the iron in the middle of ironing, it will automatically stop working, and then the hand contact induction area will automatically resume working, which is very convenient.
▲ Needless to say, after ironing for 20 seconds, it was really smooth.
Step 2: shirts
▲ This is the state before ironing, so I don't need to spit.
▲ Four-speed ironing 15 seconds, which is obviously much smoother.
3. Pants
▲ Before ironing
▲ ironing.
▲ After ironing
It can be seen that the contrast effect before and after ironing is very obvious. The ironing effect of this Philips nano steam iron is really good!
Summary:
After two weeks' trial, I have the following impression on this Ferris nano steam iron:
Advantages:
Fashionable and elegant in appearance, small and exquisite in size, with its own storage bag, which is convenient for storage and travel; The control is very intelligent. When you leave the iron at work, you will automatically pause and return to work automatically, which is convenient and intimate. Four-speed temperature control can be applied to more scene requirements; Disadvantages:
The 65ml water tank is still a little small; The power cord and the iron are integrated, which is not particularly convenient to store. Generally speaking, this Ferris nano steam iron is a very beautiful and practical iron, which can be used for daily use at home or for traveling.