Which brand of brake pads are good?

It depends on your car. European cars can choose the low-metal formula of Ferrodo, Bosch and TRW, with low price, friction coefficient of about 0.4-0.42 and acceptable heat dissipation. The technology of attaching the back plate to the friction material has the disadvantage of almost high temperature thermal attenuation, and the metal formula may occasionally have hard spots and a little noise. The advantage is that it is very cheap. In pursuit of performance and comfort, Ray Bestau's composite ceramic formula can be used, and the friction material is barbed to connect the back plate, with high friction coefficient of about 0.5, no noise, low dust and almost no thermal attenuation. It is the best technology for civilian use at present, but its disadvantage is high price. If it is the cheapest and most durable, buy the domestic ceramic formula, but the friction coefficient is very low, about 0.35-0.4, and the thermal attenuation is small. Friction materials are also bonded to the back plate, which is particularly hard and wear-resistant. However, when the friction coefficient is too low, there will always be friction when braking, and it is basically necessary to consume brake discs to achieve the effect of long replacement cycle, which is not recommended.