How to change the camera for Zotye's reversing image with a walker?

Zotye changed the camera of reversing image with a walker, opened the trunk door, unscrewed the screws on the trunk, and removed the partition of the trunk cover. After disassembling, you can see the exposed trunk, then find the buckle of the trunk outer panel, squeeze out the white rivet on the left, unscrew the fixing screw of the right trunk outer panel, and push the buckle of the left reversing camera mounting hole to the outside. There is also a pair of screws on the left side of the right door lock module. Unscrew the screws of the trunk lock. Restore according to the wiring position of the original car and connect the video cable of the original car.

Introduction of reversing image

The reversing image is also called parking assistance system, or reversing visual system, vehicle monitoring system, etc. At present, the reversing image is not a patent for mid-to high-end cars, and some small cars and minivans have been equipped with reversing image systems. For example, the high-end micro-van Junfeng CV03 is the first micro-van with reversing images, which also makes more commercial consumers experience the convenience brought by the technology configuration of reversing.

Car reversing images are a series of integrated systems, which can also be added through camera devices and on-board displays. Of course, the 360-degree panoramic vision system makes up for the images that can only be provided by radar or a single rearview camera in China. Panoramic vision system can have four video outputs, namely, front, back, left and right. Install the camera in front of the car, at the rear of the car and under the rearview mirror.