1. There is no need to center the description. The description is mainly an explanation of the claims. As long as the claims can be clearly explained, the illustrations do not require too many requirements;
2· Drawings of the instruction manual
The drawings of the instruction manual should be drawn using drawing tools including computers and black ink. The lines should be uniform, clear and deep enough, and should not be colored or altered, nor should engineering blueprints be used. Section lines in section drawings shall not prevent the clear identification of the reference marking lines and principal lines. Several drawings can be drawn on one drawing. An overall drawing can be drawn on several drawings, but it should be ensured that the drawings on each drawing are independent, and that when all the drawings are combined to form a complete overall drawing, they do not affect the clarity of each other. There should be no frames around the drawings that are irrelevant to the drawings. If the total number of drawings is more than two, they should be numbered sequentially using Arabic numerals and preceded by the word "Picture", such as Figure 1 and Figure 2. This number should be marked directly below the corresponding drawing. Drawings should be drawn as vertically on the drawing as possible and clearly separated from each other. When the lateral dimensions of the parts are significantly larger than the vertical dimensions and must be arranged horizontally, the top of the drawing should be placed on the left side of the drawing. When there are more than two drawings on a page of drawings, and one drawing has been arranged horizontally, the other drawings on the page should also be arranged horizontally. Reference signs should be numbered using Arabic numerals. Reference signs that are not mentioned in the text of the description shall not appear in the drawings, and reference signs that do not appear in the drawings shall not be mentioned in the text of the description. The reference signs indicating the same component in the application documents shall be consistent. The size and clarity of the attached drawings should ensure that each detail in the drawing can still be clearly distinguished when the drawing is reduced to two-thirds, whichever is sufficient to meet the requirements for copying and scanning. The same drawing should be drawn at the same scale. In order to clearly display a certain component, an additional partial enlarged drawing may be added. The drawings shall contain no other annotations except necessary words. The words in the accompanying drawings should be in Chinese, and if necessary, the original words can be indicated in brackets.
Flow charts and block diagrams should be included as attachments, and necessary text and symbols should be given within their frames. Generally, photos are not allowed to be used as attachments, but in special circumstances, for example, when showing metallographic structures, tissue cells or electrophoresis patterns, photos can be used and attached to drawings as attachments. The pages of the manual and accompanying drawings should be numbered in Arabic numeral order.
3·Abstract Drawings
If the description contains drawings, the applicant shall submit a drawing that best illustrates the main technical features of the technical solution of the invention as an abstract drawing. The drawing attached to the abstract should be one of the drawings included in the description. If the applicant fails to submit a drawing for the abstract, the examiner may notify the applicant to make corrections, or designate one ex officio and notify the applicant. If the examiner confirms that there are no suitable abstract drawings to be specified, the applicant does not need to make corrections. The abstract and accompanying drawings submitted by the applicant obviously cannot explain the main technical features of the invention technical solution. Preliminary examination of the invention patent application
4. Patent Examination Guidelines, Part 1, Chapter 1, 22 (1-12) technical features, or submit If the drawing attached to the abstract is not one of the drawings attached to the description, the examiner may notify the applicant to make corrections, or designate one ex officio and notify the applicant. The size and clarity of the abstract drawing should ensure that when the drawing is reduced to 4 cm × 6 cm, each detail in the drawing can still be clearly distinguished. The abstract may contain the chemical formula that best describes the invention, which may be considered a drawing accompanying the abstract.