Recently, I have been thinking that it is time to upgrade the old platform, so I came up with this idea of ????creating a desktop upgrade. All kinds of desktop combinations are no longer unfamiliar to everyone. The light-pollution host alone can no longer meet the DIY needs of lighting control, so this time the tossing upgrade is inclined to extend the lighting effect from the inside of the chassis to the desktop.
Components:
Processor: Intel I7 9700k
Motherboard: ASUS ROG Republic of Gamers M10F
Memory: ADATA D80 DDR4 3600 4*8 32G
Graphics card: ASUS GeForce GTX 1080TI O11G
Solid state: ADATA S11 PRO 512G NVMe M.2 solid state
Power supply: ASUS ROG Dragon God 1200W Platinum Power Supply
Chassis: LIANLI Bauhaus-O11 Razer Co-branded Edition
The processor is Intel I7 9700K. I have seen many comments on the performance and performance of I7 9700K The I7 8700K is pretty much the same, and both have their own strengths. It’s pretty much the same with the 8700K, and this time it’s directly on the 9th generation platform.
Every generation of ROG motherboards are classics, so I won’t waste any time describing them here. The F series also represents the high-looking heritage of the MAXIMUS series. This motherboard has been with me for more than a year. After taking it apart and cleaning it, it still looks like new. It is also suitable for use with 9th generation processors. After all, both generations of processors have a 1151-pin architecture, and the motherboards are universal.
Rich I/O sockets, one can support 8 sets of USB interface plug-in and pull-out, WIFI wireless, and TYPE-C interfaces are all available.
The recent price plunge of memory is really exciting. I directly bought ADATA XPG D80 memory, and now I can finally fill up the motherboard.
XPG D80's newly improved cooling vest is more eye-catching than the old XMP gaming Veyron. The initial silent frequency is 2666MHz, the official super frequency is 3600MHz, and the CL timing is CL17-18-18. The default voltage is 1.35V. When overclocking the XMP OC, you can use this data to continue to increase its frequency. After all, motherboards are becoming more and more AI-based, and one-click overclocking is also the norm.
In particular, the upper transparent acrylic material has a light guide system, and the inside is made of liquid heat-conducting and cold-liquid material. Liquid cooling is also one of the biggest selling points and features of this memory. Double heat dissipation gives the memory good heat dissipation protection during OC high-frequency operation. At the same time, the RGB lighting effect has been improved, and the compatibility with the mainboard lighting control of major board manufacturers is wider.
The collective price avalanche of solid-state drives is no longer a matter of a day and a half. With the improvement of 3D NAND yield, many high-performance solid-state drives have become very affordable. As an upgraded version of S11, S11 PRO uses the Huirong SM2262EN master control, which supports 8 NAND channels and high-speed PCIe Gen3 x4 specifications. At the same time, it supports the latest NVME 1.3 protocol and SMI’s patented NANDXtend ECC technology. Compared with SM2262, SM2262EN has made a qualitative leap in writing performance.
In terms of chips, ADATA XPG S11 PRO 512G uses self-proclaimed Micron 64-layer 3D NAND, two on each side of the PCB. In terms of after-sales terms, in addition to the 5-year warranty of the S11 PRO, the 512GB model itself has a writeable capacity of up to 320TBW (generally SATA solid state is limited to 75~150TBW). For general home use and games, the maximum capacity in 5 years is probably 100TBW. In terms of writing capacity, it may take more than 10 years to completely fill 320TBW. This also shows that the quality of ADATA particles is quite good.
Comparison of the appearance of the flagship 1080Ti graphics card of the 10 series and the 2080 graphics card of the 20 series (this graphics card is going to be used for split water cooling, so I took a group photo before it was disassembled)
< p> Putting aside the light tracing performance, the performance of RTX 2080 is basically in line with the previous generation 1080ti, and the gap between the two is not big. The difference lies in the GPU chip and video memory used. You can also jokingly call this generation of 2080 a ray-tracing upgraded version of the 1080Ti.LIAN LI Bauhaus O11 Razer customized version, LIAN LI is also a long-established "strong force" in mechanical and electrical manufacturers, so there is no need to brag about the chassis design. This customized version of the chassis jointly launched with Razer this year also brings a different experience to many "snake fans". The appearance and internal structure are basically the same as Bauhaus.
The loose wiring design on the back of the Bauhaus design. The cable blocking plate in the middle can not only install hardware, but also plays a lot of roles in the hidden wiring of the back line. Even if you are not a wiring madman, you can easily Arrange the backline well
Desktop display: peripherals and theme chassis
The laser-engraved LOGO on the front panel of the cabinet is translucent, unlike previous customized chassis, LIAN LI Integrating the glass engraving process here allows the LOGO not only to take advantage of the light transmission of the glass, but also to interactively switch colors along with the lighting effects.
ADATA XPG D80 liquid glare memory lighting effect
After installation:
The overall desktop atmosphere lighting effect can be linked as a whole, and Set different color combinations respectively. Variety of changes is also what lighting effect fans pursue. In addition, the synchronized light effects of ADATA XPG D80 liquid glare memory, combined with the "soft and hard" of Razer peripheral equipment and Thundercloud 3 light control, make this desktop combination " The icing on the cake.”
Moreover, JD.com’s recent price discounts are indeed a good time to buy. Friends in need can pay more attention.