Notes 1. Choose a merchant. Everyone knows that when choosing a merchant, you must choose a reputable merchant, so how can you choose a good merchant? It is best to choose some nearby merchants recommended by friends. If you go to find them yourself, you may be in danger of being charged high prices. If you are not satisfied, it will be unclear.
Notes 2. Whether the cabinet is independent: The whole set of cabinets will affect the fastness, so consumers should ask clearly when purchasing the whole cabinet. The service life and stability of the two differ by 2 to 3 times, the cost difference is 5. Consumers can identify it through the packaging and installed cabinets. If the independent cabinets are assembled in a single cabinet, each cabinet should have an independent package; consumers can also observe it before the cabinet is installed on the countertop. Using a cabinet with anti-cockroach and silent edge sealing can alleviate the impact when the cabinet door is closed, eliminate noise, and prevent cockroaches and other insects from entering. The cost difference between having and without anti-cockroach edge sealing is 3. Also check whether the countertop, door panel, box body, sealing strips, and anti-collision strips have been processed by machine lamination, and whether the front and back are pressed together. If the sealing strip is not tightly closed, oil smoke, dust, and insects may enter.
Note 3. Composition of artificial stone: Materials suitable for kitchen countertops include fireproof boards, artificial stone, natural marble, quartz stone, stainless steel, etc. Among them, the performance and price of quartz stone and artificial stone countertops are Than the best. Cheap countertops are high in calcium carbonate and prone to cracking. At present, composite acrylic, pure acrylic, etc. are mostly used in the market. The optimal ratio of acrylic components in composite acrylic is generally around 20.
Note 4. The quality of the cabinet door hinge is also critical: its quality is related to the opening life of the cabinet door; it is also necessary to check whether the leveler and screws of the foot are moisture-proof.
Notes 5. Is it possible to provide a test report: Cabinets are furniture products, and the state has express regulations to issue a finished product test report and clearly indicate the formaldehyde content. Some manufacturers can only provide raw material inspection reports, but the environmental protection of raw materials does not mean the environmental protection of finished products. Only qualified finished products can prove that their products are qualified. Consumers need to ask the merchant for it when purchasing, or they can record the quality inspection report number produced by the merchant and call the quality inspection department to check the authenticity.
Note 6. Assembly method: Generally, those made by small factories or handmade on-site can only be connected with screws, rivets or glue. It adopts the latest third-generation box body rod and tenon structure plus fasteners and quick-installation parts to more effectively ensure the firmness and endurance of the box. It also uses less glue and is more environmentally friendly.
Note 7. Carefully check the workmanship: mainly check whether the countertop, door panel, box, sealing strip, and anti-collision strip have been machine-molded, and whether the front and back sides are pressed at once. Good products will not open, bubble or deform after long-term use. If the sealing strip is not tightly closed, oil smoke, dust, and insects may enter.
Note 8. Thickness of the cabinet board: Currently, there are boards with thicknesses of 16 mm and 18 mm on the market. The cost will vary with different thicknesses. For this reason alone, the 18 mm thickness is more The cost of 16 mm thick plates is 7% higher. The service life of cabinets made of 18 mm thick plates can be more than doubled, ensuring that the door panels do not deform and the countertops are protected from cracking. When consumers look at samples, they should carefully understand the composition of the materials and be confident.