Bookshelves are made as follows:
First, partition bookshelves.
First, prepare a board, several battens, an electric drill, some screws, and preferably a chainsaw for cutting the battens and boards. If the battens and boards have been cut to the required size and length, there is no need to use a chainsaw.
Three wooden planks are used to make tripods. One wooden plank needs to be matched with two tripods, and so on. If several wooden planks need to be installed on the wall, a corresponding number of tripods will be made. Determine the position of the board, mark it, and fix the tripod on the wall. Pay attention to the fact that the upper end of the tripod should be horizontal, and the tripod mainly plays a supporting role.
put the board on the tripod and fix it with screws, so that a bookcase is made. If you want to make more bookshelves on the wall, just repeat the above steps. You can also design the length and position of wooden boards according to your own preferences, and you can harvest different bookshelves. Besides books, you can also put some decorations on the shelves, which is very practical.
second, the waste paper box bookshelf.
First of all, you should prepare the waste paper box, in addition, you need adhesive tape, art knife, ruler, pencil, etc. Determine the size of the bookshelf, measure the size of the carton with a ruler, draw marks with a pencil, cut the carton into the required shape along the drawn marks with a utility knife, and stick the edge of the cut carton with adhesive tape to fix the shape.
if you think the original color of the carton is not good-looking, you can wrap a layer of white paper on the surface of the finished carton with double-sided tape or glue, and then paint your favorite color or draw your favorite pattern on the white paper.