Illustration of the installation method of child safety seats
Illustration of the installation method of child safety seats. With the improvement of living standards, more and more families have purchased cars, but many Parents like to hold their children while riding in the car. This is a dangerous behavior. The following is a diagram of how to install a child safety seat. Illustration of child safety seat installation method 1
Child safety seats are mainly divided into three types: seat belt fixation, ISOfix system, and LATCH system.
Seat belt fixation
The installation steps are as follows:
Due to the difficulty of installing the seat belt fixation method High, complicated to operate, and incorrectly installed, so there are fewer and fewer child seats with safety belts on the market.
ISOFIX system and LATCH system
Regarding which system of child safety seats to buy, car owners can check the safety seat interface marks on both sides of the rear seat of the car.
The only difference in the installation of these two child safety seats is that the LATCH system has one more upper fixed point than the ISOfix system, and the two lower fixed points of the two systems can be Universal.
The installation steps are as follows:
Find the fixed point below the car seat, and insert the lower installation guide groove on the child safety seat into the gap in the car seat. At the lower fixing point, it is fastened when you hear the engaging sound.
Raise the headrest of the car seat to its highest position, pass the fastening strap through the headrest upright and hook it to the fixed point on the back of the seat. Check whether the fastening strap is twisted during installation. . (This step is not required for ISOFIX systems)
After the installation is complete, sure! must! must! To check that all fastening straps are not twisted or tightened, shake the child safety seat from front to back and left to right to ensure that it is stable and firm and not loose. Illustration of child safety seat installation method 2
Why is the popularity rate of child safety seats in my country less than 1%. The usage rate is only 10%?
1. It takes up a lot of space and is troublesome to install and disassemble.
The child safety seat is large and bulky and takes up nearly half of the back seat of the car. It is too crowded for two adults in the back seat and requires disassembly. Putting it in the trunk takes up half of the trunk. High frequency of disassembly and assembly: when changing cars, receiving customers, having many passengers, odd and even number traffic restrictions, etc., it is necessary to disassemble and assemble again; before disassembly, it is necessary to unfasten the seat belt, ISOFIX hook and interface, which makes installation cumbersome and disassembly troublesome. .
2. It has a service life, poor performance-price ratio, and high price
Many parents currently have a misunderstanding: they think that buying a child safety seat can be used from birth to 12 years old. In fact, the correct use of child safety seats should be divided into 4 age groups: Group : suitable for infants and young children aged 0-3, Group I: suitable for 3-6 years old, Group II: suitable for 6-9 years old, and Group III : Suitable for 9-12 years old.
Children aged 0-12 need to replace 4 sets of child safety seats. The child safety seats on the market are generally expensive, with discounts ranging from 600 to 1,000, but the quality is uneven; on average, each set of safety seats is according to 800X4=320 discount, high cost of use.
3. Poor comfort and poor environmental protection
Semi-enclosed structure makes it sultry in summer and limits children’s activity space. The main part of the child safety seat is made of plastic injection molding. Over time, the plastic ages, its flexibility decreases, it is easy to crack, and its functionality decreases. Plastic is an accessory chemical product in the crude oil refining process, and the main part of the child safety seat is made of plastic injection molding.
4. Children are unwilling to sit in adult safety seats. Three-point safety belts are not suitable for children.
Children imitate the behavior of adults. Parents don’t sit in safety seats. Why should I sit? Adult safety belts are designed according to adult weight standards. Children are not tall enough and can easily strangle their necks; stress on one shoulder can easily cause fractures.
Although my country's child safety seat market has a wide variety of products, the quality of the products varies from a few thousand yuan to tens of thousands of yuan due to: high price, poor cost performance, lack of supervision, and market chaos. Exaggerated publicity, misleading consumption, taking up space, cumbersome installation, troublesome disassembly, and too high frequency of disassembly and assembly are an important reason why parents are reluctant to use child safety seats.
The four-point child safety belt has created a new patent, abandoning the huge child safety seat structure and adopting a simpler and more convenient restraint method, using two safety belts and a middle limiter to achieve safer and more comfortable protection. At the same time, technological innovation has also brought about reductions in product consumption. The price of the 3+2 four-point child safety belt is only about 1/3 of the child safety seats on the market; the important thing is that children no longer need to be restrained, but More comfortable protection. Illustration of how to install a child safety seat 3
Is it necessary to buy a child safety seat?
Of course, unless they are well-behaved children, most children will distract their parents who are driving when they sit in the front seat. The child may secretly open the car door, may turn your steering wheel or gear lever, may suddenly turn the sound to the loudest, surprising you, or may keep asking questions, singing songs, or asking you to tell stories. Even when sitting in the back seat, children like to stand between the two chairs in the front seat. One is to be close to their parents, and the other is that sitting in the back seat is too boring.
The second issue is safety. Currently, many families travel, and many children sit alone in the passenger seat or are held in the arms of their parents. These are very dangerous practices. An ordinary emergency braking or minor collision may not have much impact on adults, but it may be fatal to children. Therefore, it is still necessary for children to buy safety seats.
Parents are worried about the material of safety seats. As long as they buy ones with guaranteed quality and have passed the testing of various parties, they don’t have to worry. Parents must realize the importance of using safety seats. If there is an accidental collision between two cars, if the baby is held in the arms of the parents, the baby may be thrown out, which is very dangerous.
It is very necessary to buy a child safety seat for your baby. Regardless of its quality, it is mainly to protect the safety of your baby in the event of a traffic accident. As long as parents realize the importance of safety seats to their babies' lives, they can choose ones with better materials and guaranteed quality when purchasing.
Is the safety seat practical?
Function 1. First, when the vehicle brakes suddenly, the child safety seat should be able to effectively prevent the baby's body from accelerating. Rush forward to avoid continuous collisions, and the safety seat should be fixed firmly to avoid loosening; when a vehicle collides, the backrest and headrest sides of the safety seat should be able to protect the baby's torso and head.
Function 2. If the vehicle collides backward, the child safety seat must be able to support the child's torso and head to avoid the root cause of injury caused by excessive speed causing the baby's neck to accelerate backward.
Function 3. If the vehicle accidentally rolls over, the stability of the safety seat must be good. It must not shift or fall off. If it becomes loose, it will cause great harm to the baby.
Precautions for using child safety seats
1. Child safety seats must be placed in the rear row and cannot be placed in the passenger seat.
2. The safest position of the safety seat is the middle position at the rear.
3. The safety seat provides 360-degree all-round protection. This is the simplest but the most important.
4. The placement of child safety seats should be selected according to the age and weight of the child.