Meizu MX3 screen is upgraded to 5. 1 inch, with the resolution of 1800* 1080, and the pixels per inch reach 4 15ppi. As for why the standard full HD resolution of 1920* 1080 is not adopted, Meizu's official explanation is that the aspect ratio of 15:9 is closer to the golden ratio. Screen components are provided by Sharp or JDI. Sharp screen adopts new Mode 2 technology and CGS technology, which can make the screen lighter and thinner, but it has better contrast and display effect in the sun.
Due to the narrow bezel design, the body width of Meizu MX3 has not increased significantly, and the size of 66. 1mm is still suitable for one-handed holding, and the official claim that the 2.9 mm bezel is the narrowest bezel mobile phone at present. In addition, the captain 139mm, the thickness is 9. 1mm, and the overall weight 143g.
In terms of hardware, Meizu MX3 adopts Samsung Exynos 5 dual quad-core processor like Samsung Galaxy S4, with built-in quad-core A7+ quad-core A 15 core, 2MB L2 cache, 2GB RAM and 2400mAh non-removable battery. In order to control the heating problem of CPU, Meizu MX3 adopts an independent two-way cooling system: the CPU achieves a magnesium alloy stainless steel composite skeleton with large area of heat dissipation graphite through heat dissipation silica gel; In the LCD cooling system, the heat of the LCD backlight passes through the large-area cooling graphite LCD stainless steel frame, achieving the purpose of rapid cooling.
In addition, due to the metal frame, in order to avoid the signal gate, Meizu MX3 improved the antenna design and applied for a patent for it. It is reported that its 3G band signal is four times stronger than that of iPhone 5, and the absorption rate of human brain is only 1/6 of the national standard in 3G band and 1/8 of the national standard in 2G band.
Meizu MX3 rear-mounted 8 megapixel third-generation back-illuminated sensor has F2.0 large aperture, zero delay anti-shake technology, built-in four-channel Fujitsu image signal processing, supports fast continuous shooting, and can complete fast continuous shooting at the speed of 20 frames per second. The front lens is Sony back-illuminated 2 million pixels.
Meizu MX3 also enhanced the musical effect of the machine, equipped with European audio processor WM5 102, with signal-to-noise ratio 1 13dB and distortion of 0.004%. At the same time, Dirac high-definition audio technology is adopted, and the acoustic optimization scheme is customized according to the acoustic physical characteristics of Meizu headphones. And the independent intelligent PA is added, which makes the external sound louder.
In terms of software, Meizu is equipped with a brand-new Flyme 3.0, based on Android 4.2. 1.