Note: The pictures are the last two pictures in Chapter 2, which will be explained separately in this chapter.
"... no one can begin to learn what he thinks he already knows. "
It is important for anyone to start learning how to treat known knowledge.
-Epik Tito.
What is described above is a technical drawing of one aspect of Joseph M. Newman Theory. These two pictures show the magnetic fields of three-Yisson and ATTRA-describing three bar magnets with three-dimensional structure surrounded and penetrated by circular gyro particles, each of which rotates while moving along continuous alternating "force lines (shells)" in opposite directions. The difference between the two pictures is that the central magnet is reversed. ]
What is described above is a technical drawing of one aspect of Joseph M. Newman Theory. The two pictures-repulsive magnetic field and attractive magnetic field-describe the shapes of three magnetic strips surrounded and penetrated by gyro particles in three-dimensional space. Each particle rotates on the "force (direction) line (shell)" and is alternately connected in opposite directions. The difference between the two pictures is that the magnetic stripe in the middle is opposite.
According to Mr Newman, these gyro particles are the smallest known particles, which contain all the atoms in the universe. Technical drawings are qualitative in nature; In terms of quantity, there are trillions of such gyro particles flowing in the described path to generate a magnetic field. Although subatomic particles will be shielded by lead, the influence of magnetic field can be observed through lead shielding. According to Mr Newman, this is a proof that these particles are the most basic known particles.
According to Mr Newman, these gyro particles are the smallest known particles, and they make up all the atoms in the universe. Technical drawings are actually qualitative analysis; In terms of quantity, there are trillions of gyro particles flowing in the described path to generate magnetic fields. Although subatomic particles will be shielded by lead, the influence of magnetic field can be observed through lead shielding. According to Mr Newman, this is proof that lead particles are the most basic known particles.
These drawings represent the first time in the history of physics to explain the magnetic phenomenon and the principle of "action at a distance" accurately and mechanically in a clear image way (through Mr. Newman's innovative concept).
These figures appeared for the first time in the history of physical development, showing the precise mechanical explanation of magnetic phenomena and the principle of action at a distance in the most direct way (using Newman's concept of creation).
In his magnetic research, james clerk maxwell (and michael faraday) clearly described the magnetic lines around the magnet as kinetic energy and mechanical energy. Maxwell called electromagnetism' matter in motion'. ") This description of Maxwell was forgotten in the past 100 years. Although Maxwell could not explain the function of magnets in detail, he did realize that this function was mechanical in nature.
Regarding his research on magnetism, Maxwell (and Faraday) clearly stated that the magnetic lines around the magnet are active mechanical energy. Maxwell's explanation has been forgotten 100 years. Although Maxwell failed to explain the motion of magnetism in detail, he realized that it was actually a mechanical motion.
When a person passes a wire through the front end of a bar magnet, he will observe that the current first flows in one direction, then becomes neutral, and then flows in the opposite direction. This is due to the flow characteristics of gyro particles flowing out from each end of the bar magnet (see the above figure). For example, on one side of the southern end of the magnetic bar, particles entering and leaving along the "magnetic field lines" will rotate "upward", while on the other side of the same southern end, particles entering and leaving along the "magnetic field lines" will rotate "downward". The rotating gyroscope will move at right angles to the force acting on it; Therefore, when gyro particles meet the particles that make up the wire, they move "up" or "down" on the conductor (at right angles to the direction in which they first meet the conductor).
When a person moves a wire from the front end to the back end of a magnet, he will observe that the current flows in one direction, then disappears, and finally flows in the opposite direction. This is due to the flow principle of gyro particles, which flow out from each pole end of the bar magnet (see the above picture). For example, at the south pole of a magnet, particles rotate in and out along the magnetic field lines, while at the same end as the south pole, particles rotate in and out along the magnetic field lines. The rotating gyroscope will precess perpendicular to the direction of force; Therefore, when the gyro particles collide with the particles that make up the wire, they move "upward" and "downward" in the conductor (perpendicular to the direction of initial collision with the conductor).
Mr. Newman pointed out that it is mainly the spin of gyro particles (rather than the flow direction of gyro particles along the "line of force") that determines the magnetic repulsion and magnetic attraction. The interaction outside the particle actually affects this repulsion and attraction (see evidence A). Although the figure depicts the space between particles flowing in a given "line of force", in fact, the particles are more like a single spiral on a spiral-shaped string of beads, which leads to the gyro effect-each particle "hits the next" [according to Mr. Newman, there is a very small space between each particle, which is generated by the electromagnetic force around each particle. ]
Mr. Newman pointed out that the spin of gyro particles mainly determines the magnetic repulsion and magnetic attraction (rather than the flow direction along the gyro "force line"). The interaction of particles at the edge actually affects repulsion and gravity (see Proof A). Although the figure depicts the space between particles flowing in a given "line of force", in fact, particles are more like a series of spiral beads rising independently, and the result is a gyro-like motion, and each particle is "colliding with the next particle". According to Mr Newman, there is a small space between particles because of the electromagnetic force around them. ]
As depicted in the figure, the actual "magnetic field lines" are actually shells of forces, and these forces wrap the magnet S into discrete shells of gyro particles, which are concentrically located in other shells. These "lines of force" (shown in a plane on the paper) or force shells (actually) travel (rotate) in opposite directions relative to each other. The effect of this movement is to oppose (or repel) the periphery of each gyro particle (from one force line to the next), thus keeping each force line separated from each adjacent (concentric) force line (shell).
As shown in the figure, the real "force line" is actually a shell with force around the magnet, and it is an independent shell composed of gyro particles concentrated on the shell. These "lines of force" (as shown in the figure) or force shells (as it is) move (rotate) in opposite directions relative to each other. The effect of this movement is to make the edges of independent gyro particles (particles in two "lines of force") face (or repel) other particles, thus keeping each "line of force" independent of the adjacent (coaxial) "lines of force (shell)".
Note: The magnetic field lines emitted by NS are repulsive.
In addition, the number of "magnetic lines of force" emitted from the two ends of the bar magnet is as much as the number of atoms magnetically arranged at the width and height of the north and south ends of the magnet. Because the size of the iron filings is relatively large relative to the subatomic size of the rotating particles, the particles in the "lines of force" condense the iron filings into a relatively small number of such lines (by the naked eye). The finer the ground iron filings, the more "lines of force" will become visible to the naked eye.
In addition, the number of "magnetic lines of force" emitted from both ends of the magnetic stripe is as much as the number of atoms magnetically arranged through the N pole and the S pole of the magnet. Because the iron filings of gyro particles smaller than atoms are larger, the particles in the "force line" will condense on relatively few iron filings. The finer the iron filings, the more obvious the "force line".
Note: the number of "lines of force" is certain, but the number of lines of force condensed on iron filings is small. Iron filings are a representation of force lines. The smaller the iron filings are, the more force lines can be displayed. The key is that the number of force lines is certain, and iron filings can change the density of force lines.
Each particle (m) travels along the "line of force (shell)" at the speed of light (c) and also spins alone at the speed of light (c). Therefore, this movement generates energy (e) because E = MC2.
Each particle moves at the speed of light along the "force line (shell)" and rotates independently at the speed of light. Therefore, the result of movement is energy E = MC2.
It should also be pointed out that based on Mr. Newman's theory, I built a three-dimensional model of two bar magnets to study how gyro cones interact. Using simple polystyrene foam (for bar magnets), wires (for "force lines") and wooden beads (for gyro particles), I can build these models as shown in the technical drawings. (This is just a similar structure. Mr. Newman didn't say that a solid particle rotates around its axis when it moves, but it is likely that a particle moves [actually rotates] in a circular [spiral] configuration at the speed of light and moves forward at the speed of light (in the general spiral action); Such combined motion is equal to c2. ] (see figure13-g. )
Based on Mr Newman's theory, I built a three-dimensional model of two bar magnets to understand how gyro particles interact. Using simple polystyrene foam (making magnets), metal wires (making "force lines") and wooden beads (making gyro particles), I can build the models in these technical drawings. This is just a similar model. Mr. Newman didn't say that the particles are rotating around the axis, but it may be that the particles move [rotate] at the speed of light in the annular structure [spiral type] and move forward at the speed of light (with spiral motion); Such combined motion is equal to c2. ) (see figure 13-G)
Note: it is important to understand the gyro, which is not necessarily a solid rotating particle.
After constructing and studying these two models, an interesting observation appears: Although the N-pole and S-pole faces of the two magnets (see Figure 65438 +03-Hl) attract each other when placed directly end-to-end, if the same face is moved to one side of the other face (keeping them in the same plane), people will notice that the peripheral spins of the rotating particles flowing out from the N-pole and the S-pole will interact to repel each other, even if the opposite is true.
The following structure and an interesting observation occurred when learning these two models: When the N pole and the S pole are placed directly end to end to attract two magnets (see figure 13-Hl), if one side is moved to the other side (so that they are in the same plane), it will be noticed that the gyro particles flowing out from the N pole and the S pole repel each other, although the opposite poles will attract each other at the head.
Note: I have experimented, that is, two magnets have opposite magnetic poles, and if they move misaligned, they will have repulsion.
This simple experiment is to test the validity of the explanation of a previously unobserved (or unexplained if observed) magnetic phenomenon, which strongly proves the correctness of Mr. Newman's theory.
The explanation of this previously undiscovered (if found, unexplained) magnetic phenomenon has been proved to be correct, which strongly further confirms the effectiveness of Mr. Newman's theory.
Similarly, when two identical magnetic poles (see figure 13-H2) are put together (n to n or s to s), although they will repel each other when placed in front, the model seems to show that when the two ends are placed slightly side by side (side by side and overlapping on the same plane), the magnets will attract each other. For this author, the real test is whether the actual magnet works in this way. When testing this magnet, I found that the observed lateral attraction (n versus n) and lateral repulsion (n versus s) were exactly the same as predicted and indicated by Mr. Newman's mechanical description. This simple experiment to test the validity of the explanation of a previously unobserved (or unexplained if observed) magnetic phenomenon is a strong evidence of the correctness of Mr. Newman's theory.
Similarly, two identical magnetic poles (see figure 13-H2) are put together (n to n or s to s)-they repel each other when they are head-to-head. The model points out that when they are gently placed side by side (one on each side, overlapping on a plane), the magnets will attract each other. The author actually experimented with the behaviors of these two magnets in these two ways. In the experiment, I found that such edge attraction (n versus n) and edge repulsion (n versus s) can be accurately observed, as predicted and indicated by Mr. Newman's mechanical description. The explanation of this previously undiscovered (if found, unexplained) magnetic phenomenon has been proved to be correct, which strongly further confirms the effectiveness of Mr. Newman's theory.
Technically, just as a water wheel uses the mechanical action of a river, Mr Newman has effectively designed a machine that can utilize the above magnetic energy and convert it into useful electric energy. Therefore, the generated electric energy comes from gyro particles containing magnet atoms. When atoms of a given material are arranged together, a magnetic field is generated (as shown in the figure). According to Mr Newman, the movement of gyro particles around the "force line (shell)" around the magnet is an accurate reflection of the internal structural interaction of these particles in a given atom. Larger particles (quarks, neutrinos, mesons, electrons, protons, neutrons, etc. ) are various configurations and agglutinations of gyro particles. When atoms are arranged in a future magnet, they begin to act (and amplify) each other's individual and atomic magnetic fields to integrate with each other until these magnetic fields are fully engaged and expanded into the magnetic field of a complete magnet.
Technically, waterwheels can use the mechanical movement of rivers. Mr Newman has effectively designed a machine that can use the above magnetic energy and convert it into useful electric energy. So the generated electric energy comes from the gyro particles that make up the magnet atoms. When the atoms of a material become ordered, a magnetic field is generated (as shown in the figure). According to Mr Newman, the movement of gyro particles in the "force line (shell)" around the magnet is a reflection of the interaction of these particles in the atomic structure. Larger particles (quarks, neutrinos, mesons, electrons, protons, neutrons, etc. ) are various permutations and combinations of gyro particles. Just as atoms become orderly and generate a magnetic field, their behavior independence, atomic number and magnetic field merge with each other until such areas are fully meshed (note: like gears) and expand into a complete magnetic field area of a magnet.
People may think that if magnets use up their gyro particles during the operation of Mr. Newman's machine, won't they eventually lose their mass completely? The answer is yes, although because Mr. Newman's energy machine runs with a conversion efficiency of 100% (no radiation, heat, light, etc. Just like in nuclear fission reactions with efficiency lower than 1%), and because there are trillions of gyro particles in each atom, Mr. Newman estimates that it will be thousands of years before people can detect any significant and measurable mass loss in magnets.
People will be surprised that if magnets run out of gyro particles when driving Mr Newman's energy machine, they will not lose all their mass in the end? The answer is yes, although because Mr Newman's energy machine works with the conversion efficiency of 100% (it will not produce radiation, heat, light, etc. For example, the fission reaction works at an efficiency less than 1%. Because there are trillions of gyro particles in each atom, Mr. Newman estimates that it can work for thousands of years before it can detect the significant and measurable mass loss of the magnet.
It should be pointed out that Mr Newman has been working on these ideas for 19 years. Mr Newman submitted his theoretical discussion and proof to the Patent Office. A few years later, he built a working prototype of his energy machine. Mr Newman is completely convinced that his theory is correct, and he doesn't need an operating machine to prove his own theory is correct. From his point of view, such a machine needs to prove to others.
It should be noted that Mr. Newman has been working on these works 19 years. A few years ago, Mr Newman submitted his theory and proof to the patent office, when he had not really made the prototype of the energy machine. Mr Newman fully believes in the correctness of his theory and doesn't need an operable machine to prove himself. Based on his point of view, it is necessary to prove to others that such a machine is needed.
This is Mr. Newman's position, from his various theories (including about [magnetism? Field generation] Gyro particles are only one aspect of his theory) People should be able to understand that it is possible to build an energy machine that can use this (gyro) energy if people can imagine the proper configuration of materials necessary to realize this utilization. This configuration is the technical aspect of the patent itself-technically independent but theoretically dependent on the understanding of the properties of gyro particles and how they interact, especially because all atoms in the universe are composed of such particles.
From Newman's standpoint, according to his theory (the generation of magnetic field is the only aspect of his theory), we should be able to understand that if we can understand the correct structure of necessary substances, it is possible to build an energy machine that can control this energy. Such a structure is the technical aspect of the patent itself-the technology is independent, but to understand the principle of gyro and how they interact, we must rely on the above theory, especially that all atoms in the universe are composed of such particles.
Although this will be a separate (but physically? In the theoretical discussion, Mr. Newman pointed out that gravity is the observation result of the interaction of unobserved electromagnetic fields (composed of gyro particles) around objects in space. Mr Newman has a theoretical concept suitable for this topic. ]
Although this will be a separate (but physically related) theoretical discussion, Mr. Newman has pointed out that gravity is the visible result of the interaction of invisible electromagnetic regions (composed of gyroscopes) around objects. Mr Newman's theoretical concepts are applicable to this topic. ]
As shown in the figure, the positive and negative charges are determined by the gyro spin of a single particle, and these charges repel or attract each other according to the external gravity (see Evidence A).
At the same time, the two figures point out that positive and negative charges depend on the rotation of independent particles, and these charges attract or repel each other according to the attraction of the periphery.
Therefore, the basic gyro particles are the unified factors of nuclear, electric, magnetic and gravitational fields.
So the basic gyro is the same element of nuclear energy, electric field, magnetic field and gravitational field.
Evan Suller, Jr
New Orleans, Louisiana (1984)
Note: Up to now, more than 30 people have signed the affidavit, which proves that Mr. Newman's invention is correct. These individuals include electrical engineers, physicists, inventors and scientists, and clearly include: Mr. Milton Everett (biomass energy expert of Mississippi Department of Energy), Dr. Roger Hastings (chief physicist of Sperry-Univac in St. Paul, Minnesota) and Mr. Eike Mueller (West German scientist and European Space Agency task coordinator 1- and NASA).
Note: Up to now, more than 30 people have signed the affidavit to prove Mr. Newman's invention. These individuals include electrical engineers, physicists, inventors and scientists, and xxx is famous.