Is the exterior wall integrated panel safe after water seepage?

If the thermal insulation and decoration integrated board system is not flooded, it can reach the same life as the building. If the integrated board is flooded, it will lead to problems such as failure, peeling and fading of the insulation material, and it will fall off if it is heavy. For example, the rock wool thermal insulation and decoration integrated board will become very heavy after absorbing water, which can reach 10 times of its own weight, thus leading to the hidden danger of falling off. However, our integrated board will not be flooded. As far as the whole thermal insulation system is concerned, only the weather-resistant glue between boards has the possibility of flooding: the quality of weather-resistant glue and the quality of gluing.

Quality of weather-resistant adhesive: There are many weather-resistant adhesives on the market. In order to improve the rheology of weather-resistant adhesive and make it easier to operate, many companies will add dimethyl silicone oil and solvent oil. However, dimethyl silicone oil and solvent oil are easy to volatilize and precipitate, which will lead to the pollution of decorative layer and the cracking of weather-resistant adhesive in the middle.

The weather-resistant adhesive used by our company is bavly brand neutral silicone weather-resistant adhesive produced by our company. First, it solves the problem that the quality of weather-resistant adhesive purchased from the market cannot be controlled. Second, the weather-resistant adhesive produced by our company does not contain dimethyl silicone oil and solvent oil, which will not cause the hidden danger of weather-resistant adhesive cracking. Glue: because the anchor used by our company is a U-shaped fastener patented by our company, the buckle ear is directly buckled on the panel, so when gluing, it must be wider than the buckle ear and higher than the buckle ear, completely covering the buckle ear, so that the weather-resistant glue covers the decorative layer, forming an L-shaped wrap angle at the outer corner of the decorative panel to prevent moisture from entering from the joint of the panel. Because the buckle ear must be replaced when gluing, a glue is formed.

So our company's integrated board will not be flooded.