Which is better, the central automatic feeding system?

Dongguan Puda Machinery Equipment Co., Ltd. is the first choice for the professional team of Dongguan Central Feeding System. Characteristics of Puda centralized feeding system: 1. Features of center console of central feed system: 1. Using PLC and large-size 10.4 inch color man-machine touch panel, it is easy to understand and operate. 2. Color text display of various settings, operations and operations. 3. It has the functions of vacuumizing and pigging the feed pipe, automatic ash flushing and dust collection, automatic switching of central feeding host A and B alternately, manual material selection and error prevention. 4. Add a raw material control screen to monitor the raw materials, material suction, material shortage and various abnormal phenomena of the central host (motor) used in each molding. Second, the main features of the central feeding system: 1. The motor is designed without stopping to avoid frequent starting and loss of the motor. 2. Attached with a safety relief valve, when the movement pressure of the main engine is too high and exceeds the safety set value, this relief valve will automatically relieve the pressure to protect the motor. 3. The main feeder alternates between two A's and B's, with automatic switching valve design to ensure the stability of raw material transportation. Iii. Features of the cyclone with automatic reverse rotation in the central feeding system: 1. The air filter and cyclone dust collector are designed as a whole, and dust is collected efficiently by natural centrifugal force. 2. You can attach a high-pressure gas storage tank to automatically clean the filter. 3. The dust collector is equipped with an air valve, which can effectively transport the dust of the dust collector without stopping. Four. Characteristics of vacuum empty door suction pipe of central feeding system: 1. The upper cover tube body is integrally formed with SUS304. 2. It can be matched according to the different conditions of each injection molding machine. 3. Patent cylinder, made of stamping, storing and absorbing materials. V. Features of stainless steel valve suction box of central feeding system: 1. Generally installed under the dryer, it is used to stop the time of conveying raw materials. Automatic closing of raw materials will leave a plastic gap in the pipeline. Features of fast feeding station (sub-station) of central feeding system: 1. The branch station consists of several branches. The injection molding machine can use the raw materials of the same branch pipe, and each branch has a quick press to ensure air tightness. 2. The system efficiency can be improved, and refueling is convenient and quick. VII. Functions of stainless steel pipe clamp and quick connector of central feeding system: 1. Specially designed for central feeding stainless steel pipes.