Issued by: State Bureau of Technical Supervision
Release date: 1990.08.20
Effective date: 1990.08.20
Chapter I General Principles
Article 1 These Articles of Association are formulated in accordance with the relevant provisions of the Standardization Law of People's Republic of China (PRC).
Article 2 In order to give full play to the role of experts in production, use, scientific research, teaching, supervision and inspection, distribution, etc. To better carry out the standardization work in various professional and technical fields, the standardization administrative department of the State Council made unified planning and established the National Professional Standardization Technical Committee (hereinafter referred to as the Technical Committee).
Article 3 The Technical Committee is a technical organization engaged in the national standardization work in a certain professional field, and is responsible for the centralized standardization work in this professional technical field. The competent professional and technical fields shall be determined by the standardization administrative department of the State Council in conjunction with the relevant administrative departments.
Article 4 The comprehensive, basic and inter-departmental technical committee shall be led and managed by the administrative department of standardization of the State Council; Belongs to the product technical committee, entrusted by the administrative department of standardization of the State Council, responsible for leadership and management. The administrative department in charge of standardization in the State Council may make necessary adjustments to the entrusted competent department according to the work needs of the leadership and management technical committee of the relevant competent department.
Chapter II Work Tasks
Fifth, follow the relevant national guidelines and policies, and put forward suggestions on the guidelines, policies and technical measures of the professional standardization work to the standardization administrative department of the State Council and the relevant administrative departments.
Article 6 In accordance with the principle of national standards revision and the policy of adopting international standards and advanced foreign standards, be responsible for organizing the compilation of professional standards system tables, and put forward plans for the compilation and revision of national standards and industry standards of this specialty and annual plans.
Seventh according to the plan approved by the administrative department of standardization of the State Council and the relevant administrative departments, assist the organization to formulate, revise and review the national standards and industry standards of this major.
Article 8 Organize the review of the manuscript of the national standards and industry standards of this major, be responsible for the technical contents in the standards, and put forward the review conclusions and suggestions on the mandatory standards or recommended standards.
Article 9 Entrusted by the standard-setting department, it is responsible for organizing the publicity and interpretation of the national standards and industry standards of this specialty; Investigate and analyze the implementation of the published standards of this major and form a written report; To put forward suggestions on the professional standardization achievement award project to the standardization administrative department of the State Council and the relevant administrative departments.
Article 10 Entrusted by the standardization administrative department of the State Council, it undertakes the standardization technical work of the International Organization for Standardization (ISO), the International Electrotechnical Commission (IEC) and other corresponding technical committees, including expressing its position on international standard documents, reviewing the Chinese translations of China's proposals and international standards, and putting forward suggestions on developing standardization technical exchanges with foreign countries.
Eleventh entrusted by the relevant administrative departments of the State Council, in the product quality supervision, inspection, certification and evaluation, to undertake the evaluation of product quality standards within the scope of professional standardization. Entrusted by the relevant administrative departments in the State Council, we can undertake the standardization review of the imported projects of this major, and put forward an analysis report on the standardization level to the competent department of the project.
Article 12 On the premise of completing the above tasks, the Technical Committee can carry out the standardization work of this major for the society, accept the entrustment of relevant provinces, municipalities and enterprises, and undertake the technical services such as the formulation, review, publicity and consultation of local standards and enterprise standards of this major.
Thirteenth entrusted by the administrative department of standardization of the State Council and the relevant administrative departments, to handle other matters related to the standardization work of this major.
Chapter III Organizational Structure
Article 14 The technical committee is mainly composed of scientific and technical personnel in production, use, scientific research and distribution, among which, the scientific and technical management personnel in administrative institutions at all levels generally do not exceed one eighth, and the scientific and technical personnel in use and distribution are not less than one quarter.
The term of office of each member of the Technical Committee is five years.
The composition scheme of the Technical Committee shall be examined and approved by the administrative department of standardization of the State Council.
Article 15 The technical committee is generally composed of about 25 people, and the sub-technical committee is composed of about 20 people, with one chairman, one to three vice-chairmen, one secretary general and, if necessary, one deputy secretary general. The chairman, vice-chairmen, deputy secretaries-general and members shall be held by on-the-job personnel, and the chairman of sub-technical committees shall generally be held by members of technical committees. When necessary, one or three experts and scholars with high reputation in this field may be hired as consultants of the Technical Committee.
Article 16 Members of the Technical Committee (hereinafter referred to as members, the same below) shall be scientific and technical personnel with high theoretical level and rich practical experience in production, use, distribution, scientific research, teaching, supervision and inspection, who are familiar with and enthusiastic about standardization work, can actively participate in standardization activities, and have technical titles above the intermediate level. The director, deputy secretary-general, members and consultants are recommended by the relevant administrative departments of the State Council, including one director and one deputy secretary-general, recommended by the unit where the secretariat works, appointed by the standardization administrative department of the State Council, and issued letters of appointment. Members may be re-elected. For those who don't perform their duties, don't participate in the activities of the Technical Committee for more than two times without reason, or often don't participate in the activities of the Technical Committee due to work changes and are not suitable to continue to serve as members, the Technical Committee may request the relevant competent departments to re-recommend candidates and report them to the the State Council Standardization Administration Department for re-appointment.
Members should actively participate in the work of the Technical Committee (such as reviewing professional technical standards and giving opinions on proposals for international standards). ). Members have the right to vote in the Technical Committee and have the right to obtain the information and documents of the Technical Committee.
Seventeenth technical committee may have unit members, the number of unit members included in the total number of members, but shall not exceed one third of the total number of members.
In the enterprises and institutions related to this major, units with strong technical force and outstanding standardization work can apply as unit members, and their representatives are recommended by the relevant administrative departments in the State Council, and the standardization administrative departments in the State Council review, appoint and issue letters of appointment.
The member units shall send technicians with intermediate titles or above engaged in the professional work as representatives to participate in the work of the Technical Committee. Representatives of unit members have the right to vote in the Technical Committee and have the right to obtain the information and documents of the Technical Committee.
Article 18 The technical committee may also set up a communication committee. The communication committee shall be applied by the relevant enterprises and institutions of this major and approved by the technical committee. There is no limit to the number of communication members.
Representatives of communication members may be invited to attend meetings of the Technical Committee, express their opinions and make suggestions, but have no right to vote. Correspondents have the right to obtain the information and documents of this technical committee.
Nineteenth unit members and communication members shall pay the information fee to the technical committee, and the payment method shall be stipulated by the technical committee and approved by the competent department of the technical committee.
Article 20 The Technical Committee shall have a secretariat. The secretariat should be located in the centralized unit of standardization technology in this major, or a unit capable of undertaking the work of the secretariat. Entrusted by the competent administrative department of standardization and the competent department of technical committee of the State Council, lead and manage the work of the Secretariat, provide secretarial staff and provide necessary working conditions for the Secretariat. The work of the secretariat should be included in the work plan of JIU.
Under the leadership of the Chairman of the Technical Committee and the Secretary-General, the Secretariat is responsible for handling the daily work of the Technical Committee. The seals of the Technical Committee and the Secretariat shall be issued by the administrative department of standardization of the State Council. When necessary, the competent department of the Technical Committee and the competent department of standardization administration of the State Council may adjust the undertaking unit of the Secretariat.
Twenty-first technical committees with a wide range of specialties may set up sub-technical committees. The establishment and formation of sub-technical committees shall be put forward by the competent department of technical committees in consultation with the relevant administrative departments of the State Council, and reported to the competent department of standardization administration of the State Council for approval.
Sub-technical committees shall abide by the articles of association. The letter of appointment of members of the Sub-technical Committee shall be issued by the administrative department of standardization of the State Council. The seals of the Technical Committee and the Secretariat shall be issued by the competent department of the Technical Committee.
The work of each technical committee is led and coordinated by the technical committee.
Sub-technical committees shall regularly report their work to the competent departments and technical committees.
Twenty-second according to the needs of the work, the technical committee may set up a working group for standard formulation (hereinafter referred to as the working group, the same below), which is responsible for the specific work of standard formulation and revision.
Twenty-third the State Council standardization administrative department and the competent department of the technical committee, send liaison officers to keep in touch with the technical committee.
Technical committees with overlapping or closely related professional scopes may send liaison officers to participate in the activities of technical committees to strengthen work coordination.
Chapter IV Working Procedures
Article 24 The Technical Committee shall put forward suggestions on the formulation and revision of national standards or industrial standards according to the requirements of the standardization administrative department and relevant administrative departments in the State Council. Suggestions on the industry standard plan shall be reported to the centralized department of industry standards and relevant administrative departments, and after coordination by the centralized department of industry standards, they shall be incorporated into the industry standard preparation and revision plan. The proposal of the national standard plan shall be submitted to the competent department of the Technical Committee, the relevant administrative department of the State Council and the competent administrative department of standardization of the State Council. After coordination,
Included in the national standard formulation and revision plan.
Article 25 The Technical Committee shall assist in organizing the implementation according to the plan issued by the standardization administrative department of the State Council and the relevant administrative departments, and guide and urge the technical committees, working groups or standards principals to draft standards.
Twenty-sixth working groups or standards are mainly responsible for drafting units. On the basis of investigation and experimental verification, they put forward a draft standard for soliciting opinions (including annexes) and distributed it to relevant members of the technical Committee and representative units and individuals for soliciting opinions. The time for soliciting opinions is generally two months. The working group or standard is mainly responsible for the drafting unit to comprehensively analyze the opinions put forward, modify the standard, submit the draft standard and report it to the secretariat.
Article 27 The Secretariat shall send the draft standard to the chairman of the Committee for preliminary examination, and then submit it to all members for review (by meeting or letter).
The Secretariat shall submit the draft standards (including annexes) to the reviewer one month before the meeting or two months before the voting. In principle, a consensus should be reached during the review. If a vote is required, it must be passed by more than three-quarters of all members (those who did not attend the joint trial and did not explain their opinions, and those who did not vote at the specified time during the letter trial will be counted as abstaining).
For standards or clauses with different opinions, there must be demonstration materials with different opinions.
The voting situation of the review standard should be recorded in written materials as an annex to the standard review opinion statement.
Twenty-eighth standard manuscript review, by the working group or the standard is mainly responsible for drafting units according to the review opinions, according to the requirements of the draft standard and its attachments, sent to the technical committee secretariat.
The working group or standard drafting unit is mainly responsible for the technical content and writing quality of the draft standard for approval.
Twenty-ninth standard manuscript after review by the Secretariat, signed by the Secretary General, sent to the chairman or his entrusted vice chairman for examination and signature, and then submitted to the competent department that issued the standard project plan for examination and approval. National standards shall be submitted to the administrative department of standardization in the State Council, and industry standards shall be submitted to the centralized department of industry standards for approval and promulgation.
The draft standards submitted to the Technical Committee for approval shall be sent to the secretariat of the Technical Committee for handling according to the procedures specified in this article.
The Technical Committee has the right to put forward reconsideration and revision opinions on the draft standards approved by the Sub-Technical Committee.
Thirtieth technical committee generally held a meeting every year (combined with the evaluation criteria), summed up the work of the previous year, arranged the plan for the next year, and checked the use of funds. The Technical Committee shall report its work in writing to the administrative department of standardization of the State Council and its competent departments every year.
Chapter V Economic Expenses
Thirty-first technical committee activities in accordance with the principle of earmarking funds to raise and use.
Thirty-second technical committee activities funded by the following:
(a) activities provided by the standardization administrative department of the State Council and the relevant administrative departments;
(2) Fees paid by unit members and correspondence members;
(three) to carry out professional standardization consulting and service income;
(4) Professional standardization work in relevant fields.
Article 33 The funds of the Technical Committee shall be used for the following aspects:
(a) Technical Committee meetings and other activities;
(two) the cost of providing information to members;
(three) conditional can provide subsidies for the formulation and revision of standards;
(4) Examination fee for standard preparations.
Article 34 The funds required for the formulation and revision of standards shall be handled in accordance with the relevant provisions of the Ministry of Finance, and the necessary standard subsidies shall be mainly provided by the competent department of planning projects.
Article 35 The secretariat of the Technical Committee shall designate a special person to manage the funds of the Technical Committee. The budget and final accounts of funds shall be reviewed and approved by the Technical Committee and implemented by the Secretariat. The Secretariat shall report the income and expenditure of funds to all members every year, and report in writing to the competent department of the Technical Committee and the competent department of standardization administration of the State Council.
Chapter VI Supplementary Provisions
Thirty-sixth each technical committee shall be crowned with a professional name. Technical Committee and sub-technical Committee are coded with TC and SC respectively. CSBTS/TC××× year × month × day × month × day × month × day × month × day × month × day × month × day × month × day × month × day × month × day × month × month × day × month × month × day × month × month × day × month × month × day × month × month × day × month × month × day × month × month × month × day × month
Article 37 The technical committee may, in accordance with these Articles of Association and in combination with the specific conditions of their respective professions, formulate the articles of association of the professional technical committee, the working rules of the secretariat and internal rules and regulations.
Article 38 The State Bureau of Technical Supervision shall be responsible for the interpretation of these Articles of Association.
Article 39 The Articles of Association shall come into force as of the date of promulgation. The Articles of Association of the National Professional Standardization Technical Committee issued by the former National Bureau of Standards19861June 0 15 shall be abolished immediately.
CSBTS
South Carolina (SC)
Technical Committee and
Name of the Sub-technical Committee
Secretariat unit
Secretariat mailing address
postcode
Corresponding EC
Tank Car
1
Voltage and current grade frequency 100044, Institute of Mechanical Science, Mechanical Department, No.2 South Road, Beijing Capital Gymnasium
TC8
2
Micro-motor Xi 'an Micro-motor Research Institute Address: No.710077, Taoyuan Road, Xijiao, Shaanxi Province
TC2
eight
Environmental conditions and environmental tests of electrical and electronic products Guangzhou Institute of Electrical Research Guangzhou Xingang West Road 204 5 10302
TC50、75
1
Guangzhou 1252 E-mail box 5 106 10, Department of Mechanical Environment Test Electronics, Fifth Research Institute.
2
Climate Environment Test of Guangzhou Electric Apparatus Research Institute, No.204 Xingang West Road, Guangzhou 5 10302
nine
Nanyang Explosion-proof Electrical Research Institute, Nanyang City, Henan Province 473000
TC3 1
16
2
Electricity, magnetic quantity and unit Office of Metrology Department of State Bureau of Technical Supervision, No.4 Zhichun Road, Haidian District, Beijing 100088
TC25
23
Box 743, Department of Electroacoustics and Electronics, Beijing Third Research Institute 1000 15
TC29、60
24
Guangzhou fifth institute of reliability and maintainability of electrical and electronic products 1252 mailbox 5 106 10
TC56
25
China Association for Standardization Information Classification and Coding, No.3 Yu Hui South Road, Chaoyang District, Beijing 100029
Application control operating system
26
Shanghai Institute of Rotating Electrical Appliances, No.505 Wuning Road, Shanghai, 200063.
TC2
27
Electrical documents and graphic symbols Institute of Mechanical Science, Ministry of Machinery, No.2, South Road, Capital Gymnasium, Beijing 100044
TC3
1
Graphical symbols of No.2 Shouti South Road, Beijing, Institute of Mechanical Science, Ministry of Machinery, 100044
SC3A
2
Beijing Institute of Document Electronic Standardization 1 10 1 email 100007.
SC3B
three
Graphical symbols of equipment, Institute of Standardization of Posts and Telecommunications Industry, No.28 Xinwai Street, Beijing, 100088
SC3C
four
The data set of Institute of Electronic Standardization is component database Beijing11mailbox 100007.
SC3D
36
Live working Wuhan Institute of High Voltage Guanshan, Wuchang, Wuhan City, Hubei Province 430074
TC78
Forty-four
Transformer Shenyang Transformer Research Institute, Tiexi District, Shenyang City, Liaoning Province 1 10025
TC 14
47
Institute of Electronic Standardization, Department of Printed Circuit Electronics, Beijing11kloc-0/mailbox 100007.
TC52
60
7 1006 1
TC22
65
High Voltage Switchgear 7 10077, Xi 'an High Voltage Electrical Apparatus Research Institute, No.8 Daqing Road, Xi 'an City, Shaanxi Province
TC 17A、C
67
Electrical Accessories Guangzhou Electric Research Institute No.204 Xingang West Road, Guangzhou 5 10302
TC23
1
Electrical Switch Shanghai Electric Tool Research Institute Shanghai Baoqing Road 10 No.200031
Sixty-eight
Baoqing Road 10, Shanghai Electric Tool Research Institute, 20003 1
TC6 1FJ
Sixty-nine
Lead-acid battery Shenyang Battery Research Institute, No.33 Beier Road, Tiexi District, Shenyang 1 10026
TC2 1
77
Tianjin 296 mailbox 30038 1 18th Institute of Alkaline Battery Electronics Department
TC2 1A
Seventy-eight
Institute of Standardization of Electronics Department of Semiconductor Devices Beijing110/mailbox 100007.
TC47
1
Beijing11mailbox 100007.
TC47
2
Institute of Electronic Standardization, Electronics Department of Semiconductor Discrete Devices, Beijing11kloc-0/mailbox 100007.
79
Radio Interference 200063, Shanghai Electric Research Institute, No.505 Wuning Road, Shanghai
CISPR
1
Radio interference measurement and statistical methods of Institute of Electronic Standardization, Ministry of Electronic Industry Beijing11kloc-0/email 100007.
2
Radio interference of radio frequency equipment of science and technology doctors at No.505 Wuning Road, Shanghai Shanghai Institute of Electrical Appliances 200063
three
Radio interference of overhead high voltage lines and equipment in Wuhan Institute of High Voltage, Hongshan District, Wuchang District, Wuhan City, Hubei Province, China, 330074.1000000000005
four
five
Interference Characteristics of Radio Receiving Equipment Mailbox 743, Beijing Electronics Third Research Institute 1000 15
six
Interference of motors, household appliances, lighting appliances and similar appliances Guangzhou Electric Research Institute, No.204 Xingang West Road, Guangzhou 5 10302
seven
Electromagnetic compatibility between systems Cuihua Road 1 15 No.710061
eight
Institute of Electronic Standardization, Information Technology Equipment Electronics Department, Beijing11kloc-0/email 100007.
8 1
7 10077 Daqing Road, the western suburb of Xi, Shaanxi Province, lightning arrester Xi 'an Electric Porcelain Research Institute
TC37
82
Electric Power Telecontrol Communication, Mailbox 323, Nanjing Institute of Automation, Ministry of Electric Power, Jiangsu Province, 2 10003.
TC57
Eighty-nine
Magnetic Components and Ferrite Materials in the Department of Electronics, Mianyang No.9 Institute, Sichuan Province 105 E-mail box 62 1000.
TC5 1
90
18 Electronic Department of Solar Photovoltaic Energy System Research Institute, Tianjin No.296 mailbox 30038 1
TC82
104
Harbin Institute of Electrical Instruments Harbin Haping Highway 1 km 150040
TC85、 13
1
The electric energy metering and load control equipment Harbin Electric Instrument Research Institute 150040 is located at Harbin Haping Highway 1 km.
2
Analog indication and digital watt-hour meter and accessories magnetic measuring instrument Harbin Electric Instrument Research Institute 150040, Harbin Haping Highway 1 km.
three
Measuring power supply detection device and recording power supply of AC /DC instruments in Shanghai Instrument Research Institute, No.225 Longjiang Road, Shanghai 200082
153
Institute of Electronic Standardization, Electronic Department of Electronic Metrology Instruments, Beijing11kloc-0/e-mail 100007.
TC44、66
154
Xuchang Relay Research Institute, No.77 Jianshe Road, Xuchang City, Henan Province, 46 1000.
TC95
1
Is there a relay? Institute of Electronic Standardization, Ministry of Electronic Industry, Beijing11mailbox 100007.
2
Static relay protection device of Nanjing Institute of Automation, Ministry of Electric Power, No.24, Cai Jia Lane, Nanjing, 2 10003.
165
Institute of electronic standardization of resistance-capacitance components for electronic equipment, Beijing11kloc-0/e-mail 100007.
TC40
1
Resistor Beijing No.3 Radio Equipment Factory Beijing Box 554 1000 15
2
Capacitor Chengdu Hongming Radio Equipment Factory Sichuan 82 Mailbox 6 10058
166
Department of Electronics, Institute of Electronic Standardization of Electromechanical Components for Electronic Equipment Beijing11kloc-0/e-mail 100007.
TC48
1
Box 62 1000, 204, Low Frequency Connector, Huafeng Radio Equipment Factory, Mianyang City, Sichuan Province
2
Box 320, Switch Electronics Department, No.40, Bengbu City, Anhui Province, 2330 10
167
Electronic Department of Electric Vacuum Devices, Institute of Electronic Standardization, Beijing11kloc-0/mailbox 100007.
TC39
176
Institute of Chemical Power Supply, China National Light Industry Federation, No.7 Zhuangxianwan, Fenmenwai, Suzhou, Jiangsu, 250006.
TC35
182
Piezoelectric devices for frequency control and selection Beijing State-owned Morningstar Radio Equipment Factory 120 mailbox 100 15
TC49
189
Shanghai Institute of Low-voltage Electrical Appliances No.505 Wuning Road, Shanghai, 200063
TC 17
190
High-frequency cables and connectors for electronic equipment 200437, 23rd Institute of Electronic Department, No.25 Yixian Road, Shanghai.
1
Electronic Department of RF Connector, Institute of Electronic Standardization Beijing110/mailbox 100007.
2
No.23, Electronic Department of RF Cable, No.25 Yixian Road, Shanghai, 200437
202
Overhead lines of Beijing Liangxiang Electric Power Construction Research Institute 10240 1
TC 1 1
205
Lianhuahe Hutong outside Guang 'anmen 1 Building Electrical Design Institute of China Electrical Equipment Corporation 100055.
TC64
207
No.23 Shijingshan Road, China Electronic Components Industry Association with or without relay 100043.
TC94
2 13
Wire and Cable Shanghai Cable Research Institute, No.0/000, Simon Road, Shanghai, 200093.
TC20、7、55
222
Transformer Shenyang Transformer Research Institute/No.81KLOC-0/0025, Tiexi North Second Middle Road, Shenyang
TC38
224
Lighting Electrical Appliances Beijing Electric Light Source Research Institute Beijing Chaowai Hujialou 100020
TC34
232
Electrotechnical terminology: Institute of Mechanical Science, Ministry of Machinery, No.2 Shouti South Road, Beijing.