First of all, how much does it cost to decorate the Longgang factory in Shenzhen?
1. How much is the square decorated by the factory? Factory decoration (all-inclusive) also requires decoration standards.
2. If you want high-grade decoration, you need 1300- 1400/ square decoration.
3. If it is a popular decoration, it needs 800-900 yuan per square meter, which belongs to the general fine decoration.
4. If you want to summarize the decoration, use 550-650 yuan/square, which belongs to ordinary decoration.
5. If the decoration is 350-450 yuan per square meter, then the decoration is simple and simple.
6, so the decoration of the factory is more decoration, generally less decoration, simple decoration is less.
(Pay attention to maintenance: materials and semi-finished products entering the site must meet the requirements of renovation contract. Decoration quality and safety need to be decorated according to the decoration agreement. The appearance of the decoration is horizontal, and the lines need to be horizontal and vertical. Check whether the floor and wall tiles are empty. If anything doesn't meet the requirements, just say it in time.
Note: This price source network is for reference only! Due to different regions, decoration materials, grades, brands and design prices will be different. Therefore, everyone should know the quotation materials of the decoration materials of the actual city decoration company and the prices of the actual goods purchased in the local building materials shopping mall. See also decoration quotation!
Second, the problems that need attention in factory decoration
1, using the function
Rational use of functional layout is the main purpose of scientific division according to specific actual areas. Generally, the workshop area is large, and the distribution of people flow and ventilation and the reservation of fire exits should also be considered in the functional division.
2. Security
Fire safety certification shall not ignore the installation of safety fire fighting equipment. Before installing fire control facilities, it is necessary to go to the local fire station for acceptance. After the project is completed, it needs to be submitted for review. Generally, it takes about 10 days to complete the fire prevention procedures, so the fire company should be consulted to negotiate the project before decoration.
3. Zoning system
In the process of decoration, the choice of partition is usually divided into different functional areas. This requires the use of different materials for zoning. Commonly used partitions are: light steel keel gypsum board partition, stainless steel glass partition. , aluminum-plastic plate tempered glass partition and pure tempered glass partition, etc. These partitions can play the role of separation, but the styles they represent are different and the prices are different. Lightweight steel keel gypsum board partition wall is low and often easy to accept.
4. Ground
The choice of ground materials is very important on the ground. Because there is a lot of wear and tear every day, try to choose some durable materials for the factory. If the ground needs to bear the load, it is best to lay a layer of concrete on the ground. Some anti-static workshops need to install anti-static floors or anti-static pvc materials, and the relatively wear-resistant floor materials are called "terrazzo floors". This kind of floor is more economical and practical, but with the emergence of new floor materials, this product has not received much appreciation.
5. Top surface
Top material, mineral wool sound-absorbing board and calcium silicate board are commonly used materials for factory decoration. These materials are low in price, low in ignition point and simple in operation, and are usually recognized by consumers. It is worth noting that no matter what material is used as the top-level material, it is mainly to cooperate with fire-fighting facilities. Usually, the ceiling keel is used first, and then the fire fighting project begins to install the spraying and smoke-sensing pipeline facilities. After the ceiling material is completely covered, the final sprinkler and smoke sensor will be installed in the fire fighting facilities.