During installation, be careful not to install the hot and cold water supply pipes upside down.
After the installation is completed, remove the easily blocked accessories such as bubbler and shower head, let the water flow out, let the impurities be completely removed, and then put them back.
2. Take out the floor drain core before installing the floor drain, so as to avoid sundries falling in, which will affect the use effect.
According to the distance between the drain pipe and the ground, adjust the installation method: the distance should be filled with cement mortar, the drain pipe should be raised, and the distance should be shortened to make the floor drain slightly lower than the ground after installation.
3, bathroom pendant installation bathroom pendant is generally installed after the installation of large products.
You need to drill a hole in the wall with an impact drill.
It is suggested that professional masters should drill holes in the tiles with glass drills first, and then use impact drills to hit cement to avoid cracking of the tiles.
Cracked tiles will be very troublesome and the project will be huge.
When installing, determine the position of water pipes and wires according to the waterway and circuit diagram, and be sure to avoid them to prevent breakage and interruption.
In addition, the hardware should not be directly touched, and it should be wrapped with a clean soft cloth before tightening.
(1) The bathroom pendant will bear a certain weight during use, and it is easy to loosen and fall off after a long time, so it needs to be fixed very firmly during installation.
(2) When the bathroom pendant has quality problems and needs to be replaced, it must be selected according to the size and hole spacing of the original bathroom pendant, so as to continue installation in the original position.
So this also reminds us that when choosing bathroom accessories, try to choose common sizes, which will basically not be eliminated.
(3) For the plastic-coated metal layer, it should not be screwed hard during installation, otherwise it will break easily.